TD Power Systems Design Engineer Interview Questions and Answers

Paper test given to candidates

Q1. What is your name
Add your answer
Q2. Angke of projection explain
Ans. 
Angle of projection refers to the angle at which an object is projected or launched into the air.
• It is the angle between the horizontal line and the direction in which the object is projected.

• The angle of projection affects the range and height of the projectile.

• For maximum range, the angle of projection should be 45 degrees.

• For maximum height, the angle of projection should be 90 degrees (vertical).
Answered by AI
Add your answer
Q3. Stress strain defination and curve
Add your answer
Q4. Modes of heat transfer
Ans. 
Heat transfer occurs through conduction, convection, and radiation.
• Conduction: Heat transfer through direct contact between materials (e.g. touching a hot pan)

• Convection: Heat transfer through the movement of fluids or gases (e.g. boiling water)

• Radiation: Heat transfer through electromagnetic waves (e.g. feeling the warmth of the sun)
Answered by AI
Add your answer
Q5. Angle of projection
Ans. 
Angle of projection refers to the angle at which an object is launched into the air.
• Angle of projection affects the range and height of the projectile.

• The optimal angle of projection for maximum range is 45 degrees.

• Different angles of projection result in different trajectories of the projectile.

• The angle of projection is measured from the horizontal axis.
Answered by AI
Add your answer

Q1. Related to procurement
Add your answer

Q1. Related to salary expectations
Add your answer

Q1. Related to joining the company and previous background
Add your answer

Q1. Introducing yourself
Add your answer
Q2. Why you need this job
Add your answer

Basic Mechanical Engineering

Q1. CAD Knowledge basic
Add your answer
Q2. Basic Measurement’s
Add your answer

Not very easy nor hard

Q1. 1st angle 3rd angle drawing difference
Ans. 
1st angle and 3rd angle drawings are two different methods of representing a 3D object on a 2D plane.
• 1st angle projection is commonly used in Europe and Asia, where the object is imagined to be in the first quadrant, while 3rd angle projection is commonly used in North America, where the object is imagined to be in the third quadrant.

• In 1st angle projection, the top view is placed below the front view, while in 3rd ang...read more
Answered by AI
Add your answer
Q2. Different symbols of drawing
Ans. 
Different symbols used in engineering drawings represent various elements and features.
• Symbols for dimensions (e.g. diameter, length)

• Symbols for surface finish (e.g. roughness)

• Symbols for welding (e.g. fillet weld)

• Symbols for electrical components (e.g. resistor)

• Symbols for mechanical components (e.g. gear)
Answered by AI
Add your answer
Q3. Cpm pert related
Add your answer

Q1. Introduction about your self
Add your answer
Q2. Why you choose this job
Add your answer

Basic Engineering of Mechanical

Q1. Knowledge about CAD
Add your answer
Q2. Measurements usage
Ans. 
Measurements are crucial in design engineering for ensuring accuracy and precision in the development process.
• Measurements are used to determine dimensions, tolerances, and material properties of components.

• They help in ensuring that the final product meets the required specifications and standards.

• Various tools such as calipers, micrometers, and gauges are used for taking measurements.

• Measurements also play a key role...read more
Answered by AI
Add your answer

Q1. How do u configure switch?
Ans. 
Switch configuration involves setting up VLANs, port security, QoS, and other settings to optimize network performance.
• Access the switch's command line interface (CLI) using a console cable or remote access software

• Configure VLANs to segment network traffic and improve security

• Enable port security to prevent unauthorized access to the network

• Set up Quality of Service (QoS) to prioritize network traffic and ensure criti...read more
Answered by AI
Add your answer
Q2. What is L2 and L3 Switch and it's differences
Ans. 
L2 and L3 switches are network devices used for packet switching. L2 operates at the data link layer and L3 at the network layer.
• L2 switch operates at the data link layer and forwards packets based on MAC addresses

• L3 switch operates at the network layer and forwards packets based on IP addresses

• L2 switch is used for LAN networks while L3 switch is used for both LAN and WAN networks

• L2 switch is faster than L3 switch as ...read more
Answered by AI
View 1 more answer
Q3. What is MPLS, where it is used
Ans. 
MPLS is a protocol used for efficient packet forwarding in a network. It is used in WANs and service provider networks.
• MPLS stands for Multiprotocol Label Switching

• It is used to improve the speed and efficiency of network traffic routing

• MPLS uses labels to identify the path that packets should take through the network

• It is commonly used in WANs and service provider networks to provide Quality of Service (QoS) and traff...read more
Answered by AI
Add your answer
Q4. Explain about VLANS and how do we create
Ans. 
VLANs are virtual LANs that allow network administrators to group devices together based on their functions or departments.
• VLANs are used to segment a network into smaller, more manageable groups.

• They can be created using network switches or routers.

• Each VLAN has its own broadcast domain and can be configured with its own security policies.

• VLANs can be created based on different criteria such as department, location, o...read more
Answered by AI
Add your answer
Q5. Why do we get hired
Add your answer
Q6. What do u know about the company
Add your answer

Q1. What you done best practice in existing company?
Ans. 
Implemented best practices in software development lifecycle, including code reviews and automated testing.
• Introduced code reviews to ensure code quality and consistency

• Implemented automated testing to catch bugs early in the development process

• Utilized version control system effectively to track changes and collaborate with team members
Answered by AI
Add your answer
Q2. What you done best practice in previous years?
Add your answer