AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Tata Technologies
Compare
Filter interviews by
Tata Technologies Interview Questions, Process, and Tips
Top Tata Technologies Interview Questions and Answers
- Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.asked in Design Engineer interview
- Q2. Parameters for proto model feasibility in existing facilityasked in Senior Design Engineer interview
- Q3. What does a CAN frame look like ?asked in Software Developer interview
Tata Technologies Interview Experiences
266 interviews found
Anonymous
Interview Questionnaire
7 Questions
- Q1. Question related to Fundamental concepts of fluid mechanics & aerodynamics
- Q2. Difference between helicopter & aero plane
- Ans.
A helicopter can hover and fly vertically, while an airplane needs a runway to take off and land.
Helicopters have rotors that allow them to take off and land vertically
Airplanes have wings that generate lift to keep them in the air
Helicopters can hover in one place, while airplanes cannot
Airplanes need a runway to take off and land, while helicopters can land almost anywhere
Helicopters are often used for search and res...
- Q3. How temperature & pressure maintain inside an aeroplane flying at 30000 ft?
- Ans.
Temperature and pressure are maintained through a combination of pressurization and air conditioning systems.
The cabin is pressurized to simulate an altitude of around 8000 ft.
Air conditioning systems regulate temperature and humidity.
Cabin pressure is maintained by adjusting the outflow valve.
Pilots monitor and adjust cabin pressure and temperature as needed.
Modern aircraft have advanced systems to ensure passenger co
- Q4. CAD, FEM & manufacturing science
- Q5. Thesis-based
- Q6. SOM
- Q7. Some design concepts
Interview Preparation Tips
Experience: Topics: Aptitude, Reasoning, English Questions
Duration: 30 minutes
Round: Technical Interview
Experience: 1 hour duration.
Tips: It would be better if you know Simulation Software.
General Tips: 1. Don’t write anything in your resume which you don’t know thoroughly because if you can’t explain than there will be bad impression.
2. Must focus on a)CAD, b)Optimization c)FEM d) Design
3. Show enthusiasm about company& good technical question
4. Don’t lose temperament
5. Try to show your thesis fruitful to them
6. Apart from designing you must know other subjects as thermal or manufacturing subjects.
College Name: IIT KANPUR
Graduate Engineer Trainee (Get) Interview Questions asked at other Companies
dhiraj p
Selected
(2 Questions)
- Q1. ETL Process/ python technical and pyspark technical interview question.
- Q2. Difference between broadcast variable and and global variable in pyspark
- Ans.
Broadcast variables are used to efficiently distribute large read-only data to all worker nodes, while global variables are shared across all tasks in a Spark job.
Broadcast variables are used for distributing large read-only data efficiently to all worker nodes.
Global variables are shared across all tasks in a Spark job.
Broadcast variables are used for caching data that is reused across multiple stages of a job.
Global ...
(1 Question)
- Q1. Salary negotiation
Interview Preparation Tips
Data Engineer Interview Questions asked at other Companies
Vijay duniya Duniya
I applied via Company Website and was interviewed in Nov 2024. There were 5 interview rounds.
Behaviour and believe to inform decisions
Details account information and development of the person
Slove tha coding problem
Further details and self information sharing and openly speaking skills test
(5 Questions)
- Q1. Interview questions
- Q2. Self information
- Q3. Behaviour to the person and turned
- Q4. Qualification and believe
- Q5. Safety skills and pasting maind set
Interview Preparation Tips
- CNC Machines
- Machine Operating
(5 Questions)
- Q1. What is a tata company?
- Ans.
Tata Group is an Indian multinational conglomerate company with businesses in various sectors such as automotive, steel, telecommunications, and more.
Tata Group is one of the largest conglomerates in India.
It has businesses in sectors like automotive, steel, telecommunications, and more.
Some of its well-known companies include Tata Motors, Tata Steel, and Tata Consultancy Services.
- Q2. Feathers of tata company
- Q3. Advantages of tata company
- Ans.
Tata Company has a strong global presence, diverse portfolio, and a history of innovation.
Strong global presence with operations in over 100 countries
Diverse portfolio spanning industries such as automotive, steel, IT services, and more
History of innovation with products like Tata Nano, India's first affordable car
- Q4. Disadvantage oftata company
- Ans.
One disadvantage of a Tata company is its limited global presence compared to other multinational corporations.
Limited global reach compared to competitors like Apple or Samsung
May face challenges in expanding into new markets due to lack of brand recognition
Potential difficulties in attracting top talent from around the world
Less diversified revenue streams compared to larger multinational companies
- Q5. What is working of tata company
Technology Specialist Interview Questions asked at other Companies
Tata Technologies interview questions for popular designations
Selected
I appeared for an interview in Mar 2025, where I was asked the following questions.
- Q1. Can you recall your proudest work accomplishment?
- Q2. What are the five P's of interviewing?
- Q3. What is the STAR method?
IT Manager Interview Questions asked at other Companies
Get interview-ready with Top Tata Technologies Interview Questions
I applied via Approached by Company and was interviewed in Nov 2024. There were 3 interview rounds.
(3 Questions)
- Q1. What is your name? My name is Angara Raviteja.
- Q2. What are your qualifications? I have completed the Government polytechnic in diploma mechanical engineering.
- Q3. What is MS and SS?
- Ans.
MS stands for Mild Steel and SS stands for Stainless Steel.
MS (Mild Steel) is a type of carbon steel with low carbon content and is commonly used in construction.
SS (Stainless Steel) is a type of steel alloy with a minimum of 10.5% chromium content, known for its corrosion resistance.
SS is often used in kitchen appliances, surgical instruments, and industrial equipment.
MS is used in structural applications, automotive
Interview Preparation Tips
Diploma Mechanical Engineer Interview Questions asked at other Companies
Jobs at Tata Technologies
(2 Questions)
- Q1. I cant tell anything
- Q2. I cant tell anything
(2 Questions)
- Q1. No I can't tell
- Q2. No I can't tell
Assistant Engineer Interview Questions asked at other Companies
I applied via Walk-in and was interviewed in Oct 2024. There were 2 interview rounds.
Group of 5 Peoples
Topic: Social Media
Time: 10 mins
(3 Questions)
- Q1. Tell me about your self?
- Ans.
Experienced C++ developer with a passion for problem-solving and creating efficient solutions.
Over 5 years of experience in C++ development
Strong understanding of data structures and algorithms
Proficient in object-oriented programming principles
Developed a real-time chat application using C++ and Boost.Asio library
- Q2. Explain about you project?
- Q3. What is the role you did in project?
Interview Preparation Tips
if their is F2F Technical or any other round we need to be prepare.
C Developer Interview Questions asked at other Companies
(2 Questions)
- Q1. React basic questions
- Q2. Javascript Basic questions
(3 Questions)
- Q1. Questions on Jwt token
- Q2. How to store jwt token
- Ans.
JWT tokens can be stored in browser storage or cookies for persistent authentication.
Store JWT token in browser's local storage for client-side storage
Store JWT token in browser's session storage for temporary storage
Store JWT token in HTTP-only cookies for better security and protection against XSS attacks
- Q3. How to secure jwt token
- Ans.
Secure JWT tokens by using HTTPS, storing them securely, setting short expiration times, and implementing proper validation checks.
Use HTTPS to encrypt communication between client and server
Store JWT tokens securely in cookies with HttpOnly and Secure flags
Set short expiration times for JWT tokens to limit exposure
Implement proper validation checks for JWT tokens to prevent tampering
React Js Frontend Developer Interview Questions asked at other Companies
Sankha Dey
Selected
I appeared for an interview in Oct 2024, where I was asked the following questions.
- Q1. Overall Previously work experience
- Q2. Field of expertise
Interview Preparation Tips
Top Tata Technologies Design Engineer Interview Questions and Answers
Design Engineer Interview Questions asked at other Companies
I applied via Campus Placement
Questions related to Core subjects
(2 Questions)
- Q1. Diodes Transistors and digital circuits
- Q2. Star delta circuits symbols
- Ans.
Star delta circuits symbols represent the connections used in motor control circuits.
Star symbol (Y) represents the connection of three windings in a star configuration
Delta symbol (Δ) represents the connection of three windings in a delta configuration
The star-delta starter is a common application of these symbols in motor control circuits
(2 Questions)
- Q1. Work life balance
- Q2. Shifts workings choice ?
Top Tata Technologies Design Engineer Interview Questions and Answers
Design Engineer Interview Questions asked at other Companies
Top trending discussions
Tata Technologies Interview FAQs
The duration of Tata Technologies interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Tata Technologies Interviews By Designations
- Tata Technologies Design Engineer Interview Questions
- Tata Technologies Senior Design Engineer Interview Questions
- Tata Technologies Graduate Engineer Trainee (Get) Interview Questions
- Tata Technologies Solution Developer Interview Questions
- Tata Technologies Technical Lead Interview Questions
- Tata Technologies Software Developer Interview Questions
- Tata Technologies Senior Engineer Interview Questions
- Tata Technologies Graduate Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- Design Engineer Interview Questions
- Senior Design Engineer Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Solution Developer Interview Questions
- Technical Lead Interview Questions
- Graduate Trainee Interview Questions
- Software Developer Interview Questions
- Senior Engineer Interview Questions
- Show more
Tata Technologies Interview Process
based on 264 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Tata Technologies Reviews and Ratings
based on 2.6k reviews
Rating in categories
|
Senior Design Engineer
2.3k
salaries
|  ₹5.2 L/yr - ₹16.2 L/yr |
|
Design Engineer
2k
salaries
| ₹3 L/yr - ₹10.2 L/yr |
|
Technical Lead
1.7k
salaries
| ₹7.4 L/yr - ₹24 L/yr |
|
Solution Developer
1.5k
salaries
| ₹3 L/yr - ₹12.1 L/yr |
|
Team Lead
624
salaries
| ₹6.9 L/yr - ₹22.2 L/yr |
Larsen & Toubro Limited
Megha Engineering & Infrastructures
Shapoorji Pallonji Group
Kalpataru Projects International
- Home >
- Interviews >
- Tata Technologies Interview Questions
