Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Tata Technologies Team. If you also belong to the team, you can get access from here

Tata Technologies Verified Tick

Compare button icon Compare button icon Compare
3.7

based on 2.4k Reviews

Filter interviews by

Tata Technologies Post Graduate Engineer Trainee Interview Questions and Answers

Updated 17 Feb 2023

Tata Technologies Post Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via campus placement at Lovely Professional University (LPU) and was interviewed in Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

It's little bit complex and reasoning also there

Round 3 - Technical 

(1 Question)

  • Q1. Asked me about my skills and technical questions
Round 4 - HR 

(2 Questions)

  • Q1. Normal hr questions
  • Q2. Introduction and about myself

Interview Preparation Tips

Interview preparation tips for other job seekers - Just study basic things and one project also and develop your skills

Interview questions from similar companies

I applied via Approached by Company and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Civil engineering questions
  • Q2. Technical questions and M.Tech project discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare about your Your technical questions and B.Tech and M.Tech projects

I applied via Approached by Company and was interviewed in Sep 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Normal aptitude test including questions related to reasoning and English.

Round 3 - Technical 

(1 Question)

  • Q1. 1. What you did in your internship and explain any one project you have worked on during the internship.
  • Ans. 

    During my internship, I worked on various projects related to software development and data analysis.

    • Developed a web application using HTML, CSS, and JavaScript for tracking inventory in a retail store.

    • Implemented data analysis algorithms in Python to analyze customer behavior and make recommendations for improving sales.

    • Collaborated with a team to design and develop a mobile app for managing employee schedules and tas...

  • Answered by AI
Round 4 - HR 

(2 Questions)

  • Q1. 1. What are your hobbies?
  • Ans. 

    My hobbies include playing the guitar, reading books, and hiking.

    • Playing the guitar: I have been playing the guitar for 5 years and enjoy learning new songs and techniques.

    • Reading books: I am an avid reader and enjoy exploring different genres, from fiction to self-help books.

    • Hiking: I love spending time in nature and exploring new trails. It helps me relax and stay physically active.

  • Answered by AI
  • Q2. 2. What do you know about the company and where are it's branches?
  • Ans. 

    The company is a leading engineering firm specializing in various sectors. It has branches in multiple cities.

    • The company is a leading engineering firm

    • It specializes in various sectors

    • It has branches in multiple cities

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just keep calm and be honest with whatever work you have done. If you don't know any answer, don't panic just take your time to think about the answer and if then also you cannot remember, just go ahead for further questions.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Group Discussion 

Time was 5-10 mins with a general topic such as Pros and Cons of XYZ.

Round 3 - One-on-one 

(2 Questions)

  • Q1. Personal Introduction
  • Q2. Basics of Supply chain, what is sourcing, procurement, etc.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at National Institute of Construction Management and Research, Pune and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

General aptitude and reasoning test.

Round 3 - Technical 

(2 Questions)

  • Q1. Technical questions related to last place i worked
  • Q2. Related to my PGDM in construction management.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and have logics in your answers. L&T is a great organisation, people sitting there are self made, they know basics. If you don't know the answer, don't make it up there. Just say I don't know and I will find out.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at National Institute of Technology (NIT), Kurukshetra and was interviewed in Jul 2024. There were 2 interview rounds.

Round 1 - Technical 

(10 Questions)

  • Q1. Tell me about youself?
  • Ans. 

    I am a recent graduate with a degree in engineering, eager to learn and grow in a professional setting.

    • Completed Bachelor's degree in Mechanical Engineering

    • Interned at XYZ Company, where I gained experience in project management

    • Proficient in CAD software such as SolidWorks

    • Strong problem-solving and analytical skills

    • Excellent communication and teamwork abilities

  • Answered by AI
  • Q2. What are your projects ?
  • Ans. 

    I have worked on projects related to renewable energy systems and sustainable building design.

    • Designed and implemented a solar panel system for a residential building

    • Conducted energy audits to optimize energy efficiency in buildings

    • Researched and proposed sustainable materials for construction projects

  • Answered by AI
  • Q3. What you did in internship?
  • Ans. 

    I worked on designing and implementing a new software system for tracking inventory and managing orders.

    • Developed a user-friendly interface for inputting and accessing data

    • Integrated barcode scanning technology for efficient inventory management

    • Collaborated with team members to troubleshoot and improve system functionality

  • Answered by AI
  • Q4. What are your favourite subjects ?
  • Ans. 

    My favorite subjects are Mathematics, Physics, and Computer Science.

    • Mathematics - I enjoy solving complex problems and equations.

    • Physics - I am fascinated by the laws of nature and how things work in the universe.

    • Computer Science - I love coding and developing new software applications.

  • Answered by AI
  • Q5. What is 2nd law of thermodynamics?
  • Ans. 

    The 2nd law of thermodynamics states that the total entropy of an isolated system can never decrease over time.

    • Entropy of a system tends to increase over time

    • Heat energy naturally flows from hot to cold objects

    • Efficiency of energy conversion processes is limited by the 2nd law

  • Answered by AI
  • Q6. What are the kelvin plank and claussis statement?
  • Ans. 

    Kelvin-Planck and Clausius statements are two fundamental principles of thermodynamics.

    • Kelvin-Planck statement: It is impossible to construct a device that operates in a cycle and produces no effect other than the extraction of heat from a single reservoir and the performance of an equivalent amount of work.

    • Clausius statement: It is impossible to construct a device that operates in a cycle and produces no effect other ...

  • Answered by AI
  • Q7. What is difference between 4 stroke and 2 stroke engines?
  • Ans. 

    4 stroke engines have separate intake, compression, power, and exhaust strokes, while 2 stroke engines combine intake and compression in one stroke and power and exhaust in another.

    • 4 stroke engines have separate intake, compression, power, and exhaust strokes

    • 2 stroke engines combine intake and compression in one stroke and power and exhaust in another

    • 4 stroke engines are more fuel efficient and produce less pollution

    • 2 ...

  • Answered by AI
  • Q8. What if we put diesel in SI engine and petrol in CI engine?
  • Ans. 

    Putting diesel in SI engine and petrol in CI engine would lead to inefficient combustion and potential damage to the engines.

    • Diesel is designed to be used in compression ignition (CI) engines, which rely on high compression ratios to ignite the fuel. Using diesel in a spark ignition (SI) engine would result in incomplete combustion and poor performance.

    • Petrol is designed for use in spark ignition (SI) engines, which re...

  • Answered by AI
  • Q9. Differentiate b/w CI and SI engine?
  • Ans. 

    CI engines use compression ignition while SI engines use spark ignition.

    • CI engines compress air to high pressures, causing the fuel to ignite spontaneously

    • SI engines use spark plugs to ignite the fuel-air mixture

    • CI engines are more fuel efficient but produce more emissions

    • Examples of CI engines include diesel engines, while SI engines include gasoline engines

  • Answered by AI
  • Q10. What is your final year project ? Asked in deep
Round 2 - HR 

(3 Questions)

  • Q1. What do yo know about company??
  • Ans. 

    Company is a leading engineering firm specializing in renewable energy solutions.

    • Company was founded in 2005 and has since grown to become a key player in the renewable energy sector.

    • They offer a wide range of services including solar panel installation, wind turbine maintenance, and energy efficiency consulting.

    • Company has completed projects in multiple countries, showcasing their global reach and expertise.

    • They prior...

  • Answered by AI
  • Q2. What is your strength and weakness ?
  • Ans. 

    Strength: Strong problem-solving skills. Weakness: Difficulty delegating tasks.

    • Strength: Able to analyze complex problems and come up with effective solutions.

    • Weakness: Struggle to trust others to complete tasks to my standards.

    • Strength: Excellent attention to detail.

    • Weakness: Sometimes too focused on perfection, leading to delays in project completion.

    • Strength: Strong communication skills, able to effectively convey i...

  • Answered by AI
  • Q3. Are you happy to relocate?
  • Ans. 

    Yes, I am happy to relocate for the right opportunity.

    • I am open to relocating for career growth and new experiences.

    • I have relocated in the past for internships and projects.

    • I understand the importance of being flexible and adaptable in the engineering field.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Essar Group Graduate Engineer Trainee (Get) interview:
  • Thermodynamics
  • IC Engines
  • Strength of material
  • Material Science
  • Heat Exchangers
Interview preparation tips for other job seekers - Just do preparation of project and internship in deep, the interview was about 20 minutes. And he asks you very basic ques about your stream.
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Dotnet sql java dotnet sql java

Round 2 - Technical 

(1 Question)

  • Q1. Dotnet sql java dotnet
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Naukri.com and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Assignment 

Basis on structural engineering

Round 2 - Case Study 

Example on CSA with queries

Round 3 - HR 

(1 Question)

  • Q1. About family and educational background
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is curing ?
  • Ans. 

    Curing is the process of maintaining adequate moisture and temperature for a specific period of time to allow concrete to achieve its desired strength and durability.

    • Curing helps in preventing the loss of moisture from the concrete, which is essential for hydration to occur.

    • Proper curing enhances the strength, durability, and overall quality of the concrete.

    • Common curing methods include water curing, steam curing, and ...

  • Answered by AI
  • Q2. What are the dimensions of test cube?
  • Ans. 

    The dimensions of a test cube are typically 150mm x 150mm x 150mm.

    • Standard dimensions are 150mm x 150mm x 150mm

    • Used for testing compressive strength of concrete

    • Can vary based on specific testing requirements

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Explain yourself ?
  • Ans. 

    I am a dedicated and hardworking individual with a passion for engineering and problem-solving.

    • I recently graduated with a degree in engineering from XYZ University.

    • I have completed internships at ABC Company where I gained hands-on experience in project management and design.

    • I am proficient in CAD software and have strong analytical skills.

    • I am a team player and enjoy collaborating with others to find innovative solut

  • Answered by AI
  • Q2. Draw a plan with structural details?
  • Ans. 

    I would draw a plan with structural details including dimensions, materials, and load-bearing elements.

    • Start by sketching the overall layout of the structure

    • Include dimensions for each component and the overall structure

    • Label materials to be used for each element (e.g. steel beams, concrete columns)

    • Highlight load-bearing elements such as columns and beams

    • Consider factors like wind load, seismic activity, and live loads

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well and participate the interview and the job is yours
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

All aptitude, verbal questions

Round 2 - Group Discussion 

Current affair topics

Round 3 - Technical 

(2 Questions)

  • Q1. Projects based question
  • Q2. Favourite subject related questions..decent knowledge on one's core is enough
Round 4 - HR 

(2 Questions)

  • Q1. Achievements and regrets
  • Q2. Family and educational background

Interview Preparation Tips

Interview preparation tips for other job seekers - have a decent knowledge in your respective domain, you should explain each and every word on your resume if needed, be confident. that is more than enough.

Tata Technologies Interview FAQs

How many rounds are there in Tata Technologies Post Graduate Engineer Trainee interview?
Tata Technologies interview process usually has 4 rounds. The most common rounds in the Tata Technologies interview process are Resume Shortlist, Aptitude Test and Technical.

Tell us how to improve this page.

People are getting interviews through

based on 1 Tata Technologies interview
Campus Placement
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
Tata Technologies Post Graduate Engineer Trainee Salary
based on 8 salaries
₹5.5 L/yr - ₹7.7 L/yr
At par with the average Post Graduate Engineer Trainee Salary in India
View more details

Tata Technologies Post Graduate Engineer Trainee Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-Life balance

3.0

Salary & Benefits

5.0

Job Security

5.0

Company culture

4.0

Promotions/Appraisal

5.0

Work Satisfaction

Explore 1 Review and Rating
Senior Design Engineer
2.2k salaries
unlock blur

₹5.2 L/yr - ₹16.2 L/yr

Design Engineer
2k salaries
unlock blur

₹2.8 L/yr - ₹10.1 L/yr

Technical Lead
1.6k salaries
unlock blur

₹6.5 L/yr - ₹26.2 L/yr

Solution Developer
1.5k salaries
unlock blur

₹3 L/yr - ₹12 L/yr

Team Lead
672 salaries
unlock blur

₹6.9 L/yr - ₹21 L/yr

Explore more salaries
Compare Tata Technologies with

KPIT Technologies

3.5
Compare

L&T Technology Services

3.4
Compare

Cyient

3.7
Compare

Tech Mahindra

3.6
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview