Upload Button Icon Add office photos

Filter interviews by

Tata Steel Utilities and Infrastructure Services Electrical Maintenance Engineer Interview Questions and Answers

Updated 1 Apr 2022

Tata Steel Utilities and Infrastructure Services Electrical Maintenance Engineer Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed in Apr 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. The question I was asked. electrical designing, mcb rccb mccb vcb acb function, Ht Lt motor Maintenance, cnc machine maintenance

Interview Preparation Tips

Interview preparation tips for other job seekers - My interview was very good.

Interview questions from similar companies

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is electric current, how will be work MCB,how many types of short skt
  • Ans. 

    Electric current is the flow of electric charge. MCB is a safety device that automatically switches off the electrical circuit. There are different types of short circuits.

    • Electric current is the movement of electrons through a conductor.

    • MCB stands for Miniature Circuit Breaker and is used to protect electrical circuits from damage caused by overload or short circuit.

    • Short circuits occur when there is an unintended con...

  • Answered by AI
  • Q2. What is ckt ,what is current,what is resistant, what is voltage
  • Ans. 

    CKT is circuit, current is flow of electrons, resistance is opposition to flow, voltage is electrical potential difference.

    • CKT stands for circuit which is a closed loop through which electricity flows

    • Current is the flow of electrons in a circuit and is measured in amperes (A)

    • Resistance is the opposition to the flow of current and is measured in ohms (Ω)

    • Voltage is the electrical potential difference between two points i...

  • Answered by AI
  • Q3. What is power , why use relay in electric current
  • Ans. 

    Power is the rate at which energy is transferred. Relays are used to control high power circuits with low power signals.

    • Power is measured in watts and is the product of voltage and current

    • Relays are used to isolate high power circuits from low power control circuits

    • Relays can also be used to switch multiple circuits with a single control signal

    • Examples of relay applications include motor control, lighting control, and

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If I have chance for doing job in it company so I will handle work nicely

I applied via Naukri.com and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. What are your strengths and weaknesses?
  • Q2. Where do you see yourself in 5 year ?
  • Q3. Why are you looking for a change?

Interview Preparation Tips

Interview preparation tips for other job seekers - I am writing to apply for electrical maintenance engineer post in your service center. The position and responsibilities seems exciting and matching to my interest areas and career goal. I would to bring your attention to my key strengths for the job role.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It's ok the question are asked from the basis

Round 2 - Technical 

(2 Questions)

  • Q1. What is the need of earth wiring
  • Q2. To eliminate and drop the sudden fault current in the system
Round 3 - HR 

(1 Question)

  • Q1. He just asked about the basis questions
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is moter and it capacity
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to perform work.

    • Motors are commonly used in various applications such as electric vehicles, industrial machinery, and household appliances.

    • They come in different types such as AC motors, DC motors, and stepper motors.

    • Motor capacity refers to its power rating, typically measured in horsepower (HP) or kilowatts (kW).

    • Higher capacity motors can gene...

  • Answered by AI
  • Q2. Moter is a mechanical part which convert electrical energy in to mechanical energy
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Why do you want to do job?
  • Q2. Why have you joined Electronics?
  • Q3. What is Ohm's law?
  • Ans. 

    Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.

    • Ohm's law is represented by the equation I = V/R, where I is the current, V is the voltage, and R is the resistance.

    • It is named after Georg Simon Ohm, a German physicist who first formulated this law.

    • This law is applicable to all types of circuits, including DC and AC circuits.

    • It is use...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for AtkinsRealis Electrical Engineer interview:
  • IT
Interview preparation tips for other job seekers - I am one guy who is troubled for job I have done diploma in electrical branch. Due to not getting the right platform, I am busy on the job link.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Commissioning activities,compressor commissioning knowledge.
  • Q2. MRT of pump knowledge

Interview Preparation Tips

Topics to prepare for L&T Energy Hydrocarbon Maintenance Engineer interview:
  • Rotary
Interview preparation tips for other job seekers - Project thew off end,properly planing all activities. Properly working of manpower,
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About youself? Role and responsibilities? why are you interested?
  • Ans. 

    I am an experienced Electrical Engineer with a passion for designing and implementing innovative solutions.

    • I have a strong background in electrical engineering, with a focus on power systems and control systems.

    • I have successfully designed and implemented electrical systems for various projects, including commercial buildings and industrial plants.

    • I am skilled in using CAD software for electrical design and have experi...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. About yourself? Role and responsibilities? day to day site work? what do u know about bechtel? Electrical safety? Drawing details?shop drawing? LOTO system? NC for quality and safety? Earthing system? powe...
Round 4 - HR 

(1 Question)

  • Q1. Documents? Current base salary? Expected base salary? Tentative date of joining?
  • Ans. 

    I can provide the required documents and discuss salary and joining details.

    • I can provide all necessary documents such as resume, certifications, and transcripts.

    • My current base salary is $X per year.

    • I expect a base salary in the range of $Y to $Z per year.

    • I am available to join within X weeks/months.

    • I can discuss further details during the interview.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is CT and PT
  • Ans. 

    CT stands for Current Transformer and PT stands for Potential Transformer. They are used in electrical systems for measurement and protection purposes.

    • CT is used to measure current in high voltage circuits by stepping down the current to a safe level for measurement.

    • PT is used to measure voltage in high voltage circuits by stepping down the voltage to a safe level for measurement.

    • Both CT and PT are essential components...

  • Answered by AI
  • Q2. What is DTC structure
  • Ans. 

    DTC structure stands for Direct Torque Control structure, a control method used in AC motor drives for precise torque and speed control.

    • DTC structure is a control technique used in AC motor drives to directly control torque and flux without the need for a separate speed controller.

    • It is based on the principle of controlling the torque and flux by selecting the appropriate voltage vectors in the motor.

    • DTC structure offe...

  • Answered by AI
  • Q3. Use of LA, AB switch
  • Ans. 

    LA, AB switch is used in electrical engineering to switch between two different signal sources or destinations.

    • LA, AB switch is commonly used in audio and video equipment to switch between different inputs or outputs.

    • It allows for easy switching between two different signal sources or destinations without having to physically disconnect and reconnect cables.

    • The switch typically has two positions - one for each signal s...

  • Answered by AI

Interview Questionnaire 

5 Questions

  • Q1. Construction plant and machinery maintenance and arrangement and requirement
  • Q2. Machinery maintenance cost details for weekly
  • Q3. Man power ( driver & operator and mechanic ) arrangement
  • Q4. Machinery maintenance schedule records maintenance
  • Q5. Planning machinery erection & dismantling and shifting

Tell us how to improve this page.

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 740 Interviews
AECOM Interview Questions
4.2
 • 114 Interviews
Apco Infratech Interview Questions
3.7
 • 112 Interviews
AtkinsRealis Interview Questions
4.0
 • 85 Interviews
GMR Group Interview Questions
4.1
 • 80 Interviews
View all
37% less than the average Electrical Maintenance Engineer Salary in India
View more details
Project Officer
65 salaries
unlock blur

₹2.5 L/yr - ₹7.5 L/yr

Assistant Manager
47 salaries
unlock blur

₹4.3 L/yr - ₹9.5 L/yr

Deputy Manager
41 salaries
unlock blur

₹6 L/yr - ₹12.1 L/yr

Manager
33 salaries
unlock blur

₹4.6 L/yr - ₹16 L/yr

Senior Officer
23 salaries
unlock blur

₹4.8 L/yr - ₹8 L/yr

Explore more salaries
Compare Tata Steel Utilities and Infrastructure Services with

Larsen & Toubro Limited

4.0
Compare

Reliance Infrastructure

4.1
Compare

Adani Enterprises

3.8
Compare

Essar Group

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview