Tata Steel Senior Operator Interview Questions and Answers

Q1. Wich in the mudgan machine dia
Ans. 
The question seems to be asking about the diameter of a machine part called a mudgan in a mudgan machine.
• The question is likely asking for the diameter of the mudgan in the mudgan machine.

• Provide information about the mudgan machine and its components.

• Explain the purpose of the mudgan in the machine.

• Discuss any specific measurements or specifications related to the mudgan.
Answered by AI
Add your answer
Q2. How much length lancing pipe
Ans. 
The length of a lancing pipe varies depending on the specific application and requirements.
• The length of a lancing pipe can range from a few inches to several feet.

• It is important to consider the depth of the operation and the reach needed when determining the length of the lancing pipe.

• Different industries and tasks may require different lengths of lancing pipes, such as in welding, plumbing, or industrial cleaning.
Answered by AI
Add your answer
Q3. Wich in the drilling machine air pressure
Ans. 
The air pressure in a drilling machine is typically controlled by the operator and can vary depending on the specific machine and drilling requirements.
• Air pressure in drilling machines is usually measured in pounds per square inch (psi).

• The optimal air pressure for a drilling machine can vary based on factors such as the type of material being drilled, the size of the drill bit, and the depth of the hole.

• Operators sho...read more
Answered by AI
Add your answer
Q4. How much drill bit dia
Add your answer
Q5. How much length drill rod
Ans. 
The length of the drill rod depends on the specific operation and equipment being used.
• The length of the drill rod can vary based on the depth of the hole being drilled.

• Different types of drilling operations may require different lengths of drill rods.

• It is important to consider the reach and capabilities of the drilling equipment when determining the length of the drill rod.
Answered by AI
Add your answer

Q1. What do you meant by basic size?
Ans. 
Basic size refers to the theoretical size of a part before any tolerance is applied.
• Basic size is the starting point for applying tolerances in manufacturing.

• It is the size that the part must be in order to function properly.

• For example, if a hole is specified to have a basic size of 10mm, it means that the hole must be exactly 10mm in diameter for the part to work correctly.
Answered by AI
Add your answer
Q2. What is nominal size?
Ans. 
Nominal size refers to the size of a part or component as designated by its name or label.
• Nominal size is the size of a part as indicated by its name, but may not be the exact physical dimensions.

• It is commonly used in manufacturing to simplify communication and standardize sizes.

• For example, a 2x4 piece of lumber actually measures 1.5 inches by 3.5 inches.
Answered by AI
Add your answer

Q1. What is limits?
Ans. 
Limits refer to the maximum or minimum values that a machine or process can handle.
• Limits are set to ensure the machine operates within safe parameters.

• Exceeding limits can result in damage to the machine or product.

• Examples include temperature limits, speed limits, and weight limits.
Answered by AI
Add your answer
Q2. What is basic metrology?
Ans. 
Basic metrology is the science of measurement, including the study of units, standards, and instruments used for measuring physical quantities.
• Involves understanding units of measurement such as length, mass, and time

• Includes knowledge of measurement standards and calibration procedures

• Utilizes various instruments like rulers, calipers, micrometers, and gauges

• Important for ensuring accuracy and precision in manufacturi
Answered by AI
Add your answer

Q1. Producer gas plant
Add your answer
Q2. Work in your company
Add your answer
Q3. Job in your company.jamuria
Add your answer
Q4. Jamuria steel plant
Add your answer
Q5. Where is best steel plant
Ans. 
The best steel plant is often determined by factors such as production capacity, technology used, quality of output, and efficiency.
• Consider the production capacity of the plant - higher capacity usually indicates a better plant

• Look at the technology used - modern and advanced technology can lead to better quality output

• Evaluate the quality of the steel produced - consistent high-quality output is a sign of a good plan...read more
Answered by AI
Add your answer
Q6. What is the best steel
Ans. 
The best steel for a specific application depends on factors such as strength, corrosion resistance, and cost.
• The best steel for construction may be different from the best steel for cutlery or automotive parts

• Factors to consider include strength, corrosion resistance, machinability, and cost

• Examples of popular steel types include stainless steel, carbon steel, and tool steel
Answered by AI
Add your answer

Q1. Production rate
Ans. 
Production rate refers to the speed at which goods are produced in a given period of time.
• Production rate can be measured in units per hour, day, week, etc.

• Factors that can affect production rate include equipment efficiency, worker productivity, and supply chain disruptions.

• For example, a factory may have a production rate of 100 units per hour.

• Increasing production rate can lead to higher output and potentially highe
Answered by AI
View 1 more amswer
Q2. How to make pellet
Ans. 
Pellets are made by compressing or molding a material into a small, cylindrical shape.
• Choose the material you want to make pellets from, such as wood, plastic, or metal.

• Grind or shred the material into small pieces.

• Add a binding agent, such as water or a chemical adhesive, to help the material stick together.

• Use a pellet mill or press to compress the material into the desired shape and size.

• Dry the pellets to remove an...read more
Answered by AI
View 2 more amswers
Q3. How much quality
Ans. 
Quality is essential for ensuring customer satisfaction and product success.
• Quality is crucial in maintaining customer satisfaction and loyalty.

• High quality products lead to positive reviews and recommendations.

• Quality control processes help identify and rectify any defects or issues.

• Investing in quality can result in long-term cost savings by reducing returns and warranty claims.
Answered by AI
View 1 more amswer

Q1. Sinter plant operator
Add your answer

Sintering prosess and opreting

Q1. Plant careless detail relation ke hisab se Induction banding plant ke bare mein jankariyan
Add your answer
Q2. Band ki jankari ke bare mein tution Bend plant ke bare mein jankari
Add your answer

Q1. Iti fitter Trade exit opretor
Add your answer
Q2. Iti fitter Exit opretor galvanizing
Add your answer
Q3. Exit opretor galvanizing
Add your answer