Tata Steel
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via Recruitment Consulltant
According to my knowledge
HIRA stands for Hazard Identification and Risk Assessment, while JSA stands for Job Safety Analysis.
HIRA is a systematic process used to identify potential hazards and analyze the associated risks in a workplace.
JSA is a step-by-step process to identify potential hazards in a specific job task and determine the best way to perform the task safely.
Both HIRA and JSA are important tools in ensuring workplace safety and pr...
A hazard is a potential source of harm or danger that could cause injury, damage, or loss.
Hazard is anything that has the potential to cause harm.
Hazards can be physical, chemical, biological, ergonomic, or psychosocial in nature.
Examples of hazards include slippery floors, toxic chemicals, infectious diseases, poor lighting, and workplace stress.
Identifying and mitigating hazards is crucial for maintaining a safe envi
Risk is the potential for harm or loss resulting from exposure to hazards.
Risk is the likelihood of a negative event occurring.
It involves assessing the probability and severity of potential harm.
Examples include workplace accidents, natural disasters, and financial losses.
Risk can be managed through mitigation strategies and safety measures.
Safety is the state of being free from harm or danger.
Safety involves identifying and mitigating risks to prevent accidents or injuries.
It includes following safety protocols and procedures to ensure a secure environment.
Examples of safety measures include wearing personal protective equipment, conducting safety inspections, and providing safety training.
Safety is a priority in industries such as construction, manufact
A toolbox meeting is a short daily safety meeting held at the worksite to discuss potential hazards, safety procedures, and any other relevant safety topics.
Toolbox meetings are typically held at the beginning of each workday to ensure all workers are aware of safety protocols and potential hazards.
Topics discussed in toolbox meetings may include recent incidents, near misses, safety reminders, and updates on safety pr...
I applied via Naukri.com and was interviewed in Apr 2023. There were 2 interview rounds.
Hierarchy of control refers to the systematic approach to managing workplace risks by prioritizing control measures.
Hierarchy of control includes elimination, substitution, engineering controls, administrative controls, and personal protective equipment (PPE).
The most effective control measures are elimination and substitution, followed by engineering controls, administrative controls, and finally PPE.
Examples include ...
The main hazard in my area is exposure to hazardous chemicals in the workplace.
Ensure all employees are properly trained on handling chemicals
Provide appropriate personal protective equipment (PPE) for employees
Regularly inspect and maintain chemical storage areas
Implement proper ventilation systems to reduce exposure risk
Tata Steel interview questions for designations
Safety is the state of being free from harm or danger, while risk is the potential for harm or loss.
Safety refers to measures taken to prevent accidents, injuries, or harm to individuals or property.
Risk is the likelihood of a negative event occurring, such as an accident, injury, or loss.
Safety involves identifying hazards, assessing risks, and implementing controls to mitigate those risks.
Risk can be managed through ...
Confined space is an area that is not designed for continuous occupancy and has limited entry and exit points. EPRP stands for Emergency Preparedness and Response Plan.
Confined space is typically small and enclosed, with limited ventilation.
Examples of confined spaces include storage tanks, sewers, and tunnels.
EPRP is a plan that outlines procedures for responding to emergencies in the workplace.
It includes protocols f...
Get interview-ready with Top Tata Steel Interview Questions
The Factory Act 1948 mandates certain safety measures to be followed in factories. Type of drill refers to the type of safety drill conducted in case of emergencies.
The Factory Act 1948 is a legislation that governs the safety measures to be followed in factories.
It mandates the provision of basic amenities like clean drinking water, ventilation, and lighting.
The act also requires the appointment of a Safety Officer to...
Top trending discussions
posted on 3 May 2021
I applied via Recruitment Consultant and was interviewed before May 2020. There were 4 interview rounds.
The Factory Act is a set of laws that regulate the working conditions in factories.
The Factory Act of 1833
The Factory Act of 1844
The Factory Act of 1850
The Factory Act of 1864
The Factory Act of 1878
The Factory Act of 1891
The Factory Act of 1901
The Factory Act of 1934
Working in a steel plant can pose various risks to safety and health.
Exposure to hazardous chemicals and gases
Falls from heights or slips and trips on slippery surfaces
Burns from hot surfaces or molten metal
Injuries from heavy machinery and equipment
Noise-induced hearing loss
Heat stress and dehydration
Electrical hazards
Crane and forklift accidents
Confined space hazards
Ergonomic hazards from repetitive tasks or awkward
Safety is the condition of being protected from harm or danger.
Safety involves identifying and mitigating risks to prevent accidents or injuries.
It includes following safety protocols and procedures to ensure a safe work environment.
Regular safety inspections and training are essential to maintain a safe workplace.
Emergency preparedness and response plans are crucial for addressing potential safety hazards.
Safety cultu...
Improved illumination in working areas enhances safety and productivity.
Better visibility reduces the risk of accidents and injuries.
Workers can perform tasks more efficiently and accurately.
Proper lighting can also improve mental alertness and reduce eye strain.
Examples include installing brighter bulbs, adding task lighting, and using reflective surfaces.
Regular maintenance and cleaning of lighting fixtures is also i
Safety is essential for preventing accidents, injuries, and promoting a secure environment.
Preventing accidents and injuries
Promoting a secure environment
Ensuring compliance with safety regulations
Reducing risks and hazards
Protecting workers' health and well-being
Enhancing productivity and efficiency
Minimizing financial losses due to accidents
Building trust and confidence among employees and stakeholders
PPEs are used to protect workers from potential hazards in the workplace.
PPEs (Personal Protective Equipment) are used to minimize the risk of injury or illness.
They provide a physical barrier between the worker and the potential hazards.
PPEs can include items such as helmets, gloves, safety glasses, and protective clothing.
They are essential in industries where workers are exposed to chemicals, noise, heat, or physica...
Following safety rules is important to prevent accidents and ensure a safe working environment.
Safety rules are designed to protect individuals from potential hazards and minimize the risk of accidents.
By following safety rules, employees can prevent injuries and illnesses, reducing the number of workplace incidents.
Compliance with safety rules promotes a culture of safety and helps create a positive work environment.
F...
Documents on safety are important for ensuring compliance, promoting awareness, and providing guidelines for safe practices.
Documents on safety help to ensure compliance with safety regulations and standards.
They provide guidelines and procedures for safe practices in various work environments.
Safety documents also help to promote awareness and educate employees about potential hazards and risks.
They serve as a referen...
Inspection of lifting tools and tackles is important for ensuring their safety and preventing accidents.
Identify any wear and tear on the tools and tackles
Check for any damage or defects that may affect their functionality
Ensure proper maintenance and lubrication to prevent failures
Verify the load capacity and suitability for the intended use
Inspect for proper labeling and markings
Conduct regular inspections to identif...
based on 6 interviews
Interview experience
based on 79 reviews
Rating in categories
Manager
1.6k
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
1.4k
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
1.2k
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
991
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Engineer
909
salaries
| ₹0 L/yr - ₹0 L/yr |
JSW Steel
Steel Authority Of India
Vedanta Limited
ArcelorMittal Nippon Steel