Upload Button Icon Add office photos

Tata Motors

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Tata Motors Graduate Apprentice Trainee Interview Questions and Answers

Updated 30 Sep 2024

Tata Motors Graduate Apprentice Trainee Interview Experiences

4 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Sep 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Technical + verbal + aptitude

Round 3 - Technical 

(2 Questions)

  • Q1. Technical Interview
  • Q2. Project related and same basic questions of ev.
Round 4 - HR 

(1 Question)

  • Q1. Ev field + work + safety related + position and family background.

Interview Preparation Tips

Interview preparation tips for other job seekers - I am very happy with this job, I am getting to learn a lot here.

I applied via campus placement at SATI, Vidisha and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Basic aptitude was asked, reasoning questions specially syllogism, technical questions of electrical and electronics

Round 2 - One-on-one 

(1 Question)

  • Q1. Get ready for the counter questions on tell me about yourself: Major Project related details, basic electrical machines questions, AC and DC, electrical drives

Interview Preparation Tips

Interview preparation tips for other job seekers - Test was easy if you have little bit command on Aptitude and reasoning just brush up basic formula and tricks, in interview round they will ask you about your project details and salient features of components used and your favourite subject related questions

Graduate Apprentice Trainee Interview Questions Asked at Other Companies

Q1. 1-why higher voltage is prefer for transportation ,2-why house wi ... read more
Q2. How engine works? Explain the function of flywheel? What if we us ... read more
Q3. In Convection, how the heat is transferred? medium of transfer?
Q4. Can you explain the use of three point linkage in a tractor? Its ... read more
Q5. Why rear tires are big in tractor?
Interview experience
4
Good
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I was interviewed before Sep 2023.

Round 1 - Aptitude Test 

Related to match, general

Round 2 - One-on-one 

(2 Questions)

  • Q1. Related to basic automobile
  • Q2. Related internship

I applied via campus placement at Government College of Engineering, Aurangabad and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 
Round 3 - Technical 

(3 Questions)

  • Q1. Details about your final year project?
  • Q2. What you have contributed in your project?
  • Q3. What courses you have attained in your academics?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while answering and be ensured what you have answer the notice the similarities in your answer

Tata Motors interview questions for designations

 Graduate Engineer Apprentice Trainee

 (1)

 Apprentice Trainee

 (7)

 Technical Apprentice Trainee

 (1)

 Diploma Apprentice Trainee

 (3)

 Post Graduate Engineer Trainee

 (1)

 Graduate Apprenticeship Trainee

 (1)

 Graduate Trainee

 (5)

 Apprentice

 (5)

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

It was quite easy. Depends upon the practice

Round 3 - Technical 

(2 Questions)

  • Q1. At first they asked self introduction and technical questions
  • Q2. Explain abt your project
  • Ans. 

    My project focused on developing a mobile application for tracking personal fitness goals.

    • Developed a user-friendly mobile app for iOS and Android platforms

    • Implemented features such as goal setting, workout tracking, and progress visualization

    • Integrated with wearable devices to automatically sync data

    • Utilized data analytics to provide personalized recommendations for users

    • Conducted user testing and gathered feedback fo

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep trying until you reach don't neglect anything

I applied via Walk-in and was interviewed in May 2022. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. You have full effected to work?
  • Ans. 

    Yes, I have full effect to work.

    • I am fully capable and ready to work.

    • I have the necessary skills and qualifications for the job.

    • I am motivated and committed to performing my duties effectively.

    • I have a positive attitude and am willing to learn and grow in my role.

    • I am physically and mentally fit to handle the demands of the job.

  • Answered by AI
  • Q2. What is the purpose of switch gear?
  • Ans. 

    Switchgear is used to control, protect, and isolate electrical equipment in power systems.

    • Switchgear is essential for the safe and reliable operation of electrical systems.

    • It controls the flow of electrical power and protects equipment from overloads, short circuits, and faults.

    • Switchgear isolates faulty equipment or sections of a power system to prevent further damage.

    • It allows for maintenance and repairs to be carrie...

  • Answered by AI
  • Q3. What is LED Full form?
  • Ans. 

    LED stands for Light Emitting Diode.

    • LED is a semiconductor device that emits light when an electric current passes through it.

    • It is commonly used in various applications such as lighting, displays, and indicators.

    • LEDs are energy-efficient and have a longer lifespan compared to traditional incandescent bulbs.

    • They come in different colors and can be used for decorative purposes as well.

    • Examples of LED applications includ...

  • Answered by AI
  • Q4. Why use diode in rectifier?
  • Ans. 

    Diodes are used in rectifiers to convert alternating current (AC) to direct current (DC).

    • Diodes allow current to flow in only one direction, blocking the reverse flow.

    • They help in converting the negative half cycles of AC to positive half cycles of DC.

    • Diodes prevent the loss of power that occurs in AC circuits due to negative half cycles.

    • They are essential components in power supplies, battery chargers, and electronic ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Wrong or right answer is confident but wrong answers change learn to wrong .bold talks..

I applied via Company Website and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. Personal information about yourself
Round 2 - Technical 

(2 Questions)

  • Q1. In which subject did you have good knowledge
  • Ans. 

    I have good knowledge in the subject of Mechanical Engineering.

    • Mechanical Engineering

    • Thermodynamics

    • Fluid Mechanics

    • Strength of Materials

    • Machine Design

  • Answered by AI
  • Q2. Based on the subject they asked questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while going to attend the interview
Technical knowledge should be good
Round 1 - Apprentice 
Round 2 - Technical 

(1 Question)

  • Q1. What is your name And your family introduction
Round 3 - Aptitude Test 

Good

Interview Preparation Tips

Interview preparation tips for other job seekers - Goo

I applied via Company Website and was interviewed before Jul 2021. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is NTL Lidar. Onthe Toyota kirlusakar motor company
  • Ans. 

    NTL Lidar is a laser-based technology used for object detection and mapping in autonomous vehicles.

    • NTL Lidar stands for 'New Technology Light Detection and Ranging'.

    • It uses laser beams to create a 3D map of the surrounding environment.

    • This technology is commonly used in autonomous vehicles for object detection and collision avoidance.

    • Toyota Kirloskar Motor Company may be using NTL Lidar in their autonomous vehicle deve

  • Answered by AI
  • Q2. When open the National Technical Exam
  • Q3. Year End one time attend to Exam best 90%above who is tencation come on display to Toyoya zone

Interview Preparation Tips

Interview preparation tips for other job seekers - Best company best family vichal in Toyota kirlusakar motor (Japan ) qualis Innova

I applied via Walk-in and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. What is the melting point of Iron.
  • Ans. 

    The melting point of Iron is approximately 1538 degrees Celsius.

    • The melting point of Iron is an important property in understanding its behavior under high temperatures.

    • Iron melts at a relatively high temperature compared to other common metals.

    • The melting point of Iron is around 1538 degrees Celsius or 2800 degrees Fahrenheit.

    • At its melting point, Iron transitions from a solid to a liquid state.

  • Answered by AI
  • Q2. What is heat treatment.
  • Ans. 

    Heat treatment is a process used to alter the physical and mechanical properties of materials through heating and cooling.

    • Heat treatment involves heating a material to a specific temperature and holding it at that temperature for a certain period of time.

    • The purpose of heat treatment is to change the material's microstructure, which in turn affects its properties such as hardness, strength, and ductility.

    • Common heat tr...

  • Answered by AI
  • Q3. Who many types of casting.
  • Ans. 

    There are several types of casting used in manufacturing processes.

    • Sand casting: uses sand as the mold material

    • Investment casting: uses a wax pattern that is coated with a ceramic material

    • Die casting: uses a metal mold to produce complex shapes with high accuracy

    • Centrifugal casting: molten metal is poured into a rotating mold

    • Continuous casting: used for producing long, continuous metal shapes

    • Shell molding: uses a resin...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't worry all is well.

Skills evaluated in this interview

Tata Motors Interview FAQs

How many rounds are there in Tata Motors Graduate Apprentice Trainee interview?
Tata Motors interview process usually has 2-3 rounds. The most common rounds in the Tata Motors interview process are Aptitude Test, Resume Shortlist and Technical.
What are the top questions asked in Tata Motors Graduate Apprentice Trainee interview?

Some of the top questions asked at the Tata Motors Graduate Apprentice Trainee interview -

  1. Project related and same basic questions of ...read more
  2. Related to basic automob...read more
  3. Technical Interv...read more

Tell us how to improve this page.

Tata Motors Graduate Apprentice Trainee Interview Process

based on 3 interviews

Interview experience

4.7
  
Excellent
View more

Interview Questions from Similar Companies

Maruti Suzuki Interview Questions
4.2
 • 584 Interviews
Hero MotoCorp Interview Questions
4.1
 • 332 Interviews
TVS Motor Interview Questions
4.0
 • 312 Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
Ford Motor Interview Questions
4.4
 • 145 Interviews
Kia Motors Interview Questions
3.9
 • 131 Interviews
View all
Tata Motors Graduate Apprentice Trainee Salary
based on 49 salaries
₹1.4 L/yr - ₹4.8 L/yr
22% more than the average Graduate Apprentice Trainee Salary in India
View more details

Tata Motors Graduate Apprentice Trainee Reviews and Ratings

based on 14 reviews

4.2/5

Rating in categories

4.4

Skill development

3.7

Work-life balance

3.8

Salary

3.4

Job security

3.8

Company culture

2.4

Promotions

3.7

Work satisfaction

Explore 14 Reviews and Ratings
Senior Manager
6.2k salaries
unlock blur

₹6.9 L/yr - ₹28.4 L/yr

Deputy General Manager
835 salaries
unlock blur

₹13 L/yr - ₹47.3 L/yr

Executive
811 salaries
unlock blur

₹2.4 L/yr - ₹12.3 L/yr

Territory Sales Manager
422 salaries
unlock blur

₹8 L/yr - ₹25 L/yr

Manager
416 salaries
unlock blur

₹6.1 L/yr - ₹21 L/yr

Explore more salaries
Compare Tata Motors with

Maruti Suzuki

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Mercedes-Benz Research and Development India

3.8
Compare

Ashok Leyland

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview