AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Tata AutoComp Systems
Compare
Filter interviews by
Tata AutoComp Systems Graduate Engineer Interview Questions and Answers
Tata AutoComp Systems Graduate Engineer Interview Experiences
1 interview found
Selected
I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.
Simple aptitude test was taken
(2 Questions)
- Q1. What are the some common defects in moulds
- Ans.
Common defects in moulds include air pockets, shrinkage, warping, and sink marks.
Air pockets: trapped air in the mould causing voids in the final product
Shrinkage: uneven cooling leading to dimensional changes in the product
Warping: distortion of the product due to uneven cooling or improper mould design
Sink marks: depressions on the surface of the product caused by uneven cooling or insufficient packing pressure
- Q2. What are the causes of those common defects
- Ans.
Common defects in engineering can be caused by factors such as poor design, material issues, manufacturing errors, and environmental conditions.
Poor design choices or inadequate specifications
Material defects or inconsistencies
Manufacturing errors or poor quality control
Environmental factors such as temperature, humidity, or corrosion
Improper maintenance or usage
Top trending discussions
Interview questions from similar companies
Senior Engineer Interview Questions & Answers
Samvardhana Motherson Group
Anonymous
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Interview Questionnaire
3 Questions
- Q1. What are the die casting and machining defects?
- Ans.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
- Q2. What is the formula of filling and high speed ratio?
- Ans.
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
- Q3. Why do u want to join Motherson?
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Samvardhana Motherson Group
Anonymous
posted on 19 Jan 2021
I was interviewed in Jul 2020.
Interview Questionnaire
1 Question
- Q1. Waht is your achievements
- Ans.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
Interview Preparation Tips
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
(2 Questions)
- Q1. Depends on experience
- Q2. Related to systematic approach
- Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Questions were based on CV
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Endurance Technologies
Anonymous
posted on 23 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. Which vehicle license you have?
- Ans.
I have a valid driver's license for both cars and motorcycles.
I have a Class C license for cars
I also have a Class M license for motorcycles
I have a clean driving record with no accidents or violations
- Q2. What is CBS & ABS
- Q3. Which segment of bike you ride
- Ans.
I ride a road bike for commuting and a mountain bike for leisure.
I prefer road bikes for their speed and efficiency on paved roads.
I enjoy mountain biking for the challenge and adventure of off-road trails.
I also have experience with hybrid bikes for their versatility.
I prioritize safety and always wear a helmet and follow traffic laws.
I have participated in charity rides and group rides for fun and community.
- Q4. How you do the vehicle testing
- Ans.
Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.
Testing can include physical tests such as crash tests, durability tests, and performance tests.
Simulation and modeling can also be used to test vehicle components and systems.
Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European
- Q5. Which type of Homologation testing you do?
- Ans.
We conduct various types of homologation testing depending on the product and its intended market.
We conduct safety testing to ensure compliance with local regulations.
We perform emissions testing to ensure compliance with environmental regulations.
We conduct performance testing to ensure the product meets the required standards.
We also conduct durability testing to ensure the product can withstand the expected wear an...
Interview Preparation Tips
I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Technical questions regarding GDC process, rejection control and analysis..
- Q2. Hypothetical questions, besed on situation handling, manpower handling and decision making
Interview Preparation Tips
I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.
(2 Questions)
- Q1. Write and explain GD&T symbols?
- Ans.
GD&T symbols are used to specify the geometric requirements of a part or assembly.
GD&T stands for Geometric Dimensioning and Tolerancing
Symbols include: flatness, circularity, perpendicularity, concentricity, position, and more
Each symbol has a specific meaning and is used to communicate precise engineering requirements
GD&T is used in industries such as aerospace, automotive, and manufacturing
Example: A position symbol...
- Q2. Explain Cp, Cpk & Pp, Ppk?
- Ans.
Cp, Cpk, Pp, and Ppk are statistical process control indices used to measure process capability and performance.
Cp and Cpk measure how well a process meets its specifications, with Cpk being more accurate for non-centered processes.
Pp and Ppk measure how well a process performs relative to its natural variation, with Ppk being more accurate for non-centered processes.
All four indices are calculated using the process me...
(1 Question)
- Q1. Related to GD&T, CNC programming knowledge, SPC, Fixture design and development, Tool design and development.
Interview Preparation Tips
Casting should be thorough
Aluminium die Casting
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Endurance Technologies
Anonymous
posted on 10 Aug 2022
I applied via Walk-in
(1 Question)
- Q1. What is your current role and responsibility
(1 Question)
- Q1. Why you are leaving your current job
Interview Preparation Tips
Tata AutoComp Systems Interview FAQs
Tell us how to improve this page.
Tata AutoComp Systems Interviews By Designations
- Tata AutoComp Systems Senior Engineer Interview Questions
- Tata AutoComp Systems Quality Engineer Interview Questions
- Tata AutoComp Systems Engineer Interview Questions
- Tata AutoComp Systems Vice President (VP) Interview Questions
- Tata AutoComp Systems Lead Engineer Interview Questions
- Tata AutoComp Systems Senior Design Engineer Interview Questions
- Tata AutoComp Systems Electrical Maintenance Engineer Interview Questions
- Tata AutoComp Systems Senior Quality Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Graduate Engineer Trainee (Get) Interview Questions
- Graduate Trainee Interview Questions
- Production Graduate Engineer Trainee Interview Questions
- Graduate Apprentice Trainee Interview Questions
- Graduate Apprenticeship Trainee Interview Questions
- Graduate Student Interview Questions
- Graduate Apprentice Interview Questions
- Post Graduate Engineer Trainee [pget] Interview Questions
- Show more
Tata AutoComp Systems Graduate Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Tata AutoComp Systems Graduate Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Manager
391
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Senior Engineer
217
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Senior Design Engineer
178
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Design Engineer
139
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Quality Engineer
133
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Samvardhana Motherson Group
Sundaram Clayton
Rane Group
- Home >
- Interviews >
- Tata AutoComp Systems Interview Questions >
- Tata AutoComp Systems Graduate Engineer Interview Questions
