Filter interviews by
I applied via Referral and was interviewed in Dec 2021. There was 1 interview round.
To increase engine torque, you can optimize the air-fuel mixture, increase the engine displacement, or enhance the exhaust system.
Optimize the air-fuel mixture by adjusting the fuel injection timing and air intake
Increase the engine displacement by using a larger bore or longer stroke
Enhance the exhaust system by installing a high-flow catalytic converter or performance headers
A flywheel is a mechanical device used to store rotational energy and smooth out fluctuations in speed of a rotating shaft.
Flywheels store energy by increasing their rotational speed
They are commonly used in engines to maintain a constant speed
Flywheels are also used in power plants to store energy for backup power
They help reduce vibrations and provide stability in machinery
Torque is the rotational force produced by an engine, while horsepower is a measure of the engine's overall power output.
Torque is the twisting force that causes an object to rotate around an axis.
Torque is typically measured in pound-feet (lb-ft) or Newton-meters (Nm).
Horsepower is a measure of the engine's ability to do work over time.
Horsepower is calculated by multiplying torque by engine speed and dividing by a co...
A gear box in a tractor is used to control the speed and torque of the vehicle by changing gears.
The gear box in a tractor is essential for controlling the speed and power of the vehicle.
There are different types of gear boxes used in tractors, such as manual, automatic, and hydrostatic.
Manual gear boxes require the driver to manually shift gears using a clutch pedal.
Automatic gear boxes shift gears automatically based...
The rear wheel of a tractor is bigger in size to provide better traction and stability when working in rough terrains.
Bigger rear wheels help distribute the weight of the tractor more evenly, reducing soil compaction.
Increased surface area of the rear wheels allows for better traction, especially in muddy or uneven terrains.
The larger size helps in providing stability to the tractor when carrying heavy loads or perform...
Differential system allows wheels to rotate at different speeds, while differential lock locks both wheels to rotate at same speed in a tractor.
Differential system allows wheels to rotate at different speeds to prevent slippage and improve traction.
Differential lock is used when both wheels need to rotate at the same speed, such as in muddy or slippery conditions.
Differential lock can be engaged manually or automatical...
I applied via Campus Placement and was interviewed in Sep 2024. There were 3 interview rounds.
Technical+ few Aptitude
EV,AI .The GD Round was conducted around 15 mins where each one of them given chance to speak
Shear force and Bending Moment Diagrams are graphical representations of the internal forces acting on a beam.
Shear force diagram shows the variation of shear force along the length of a beam.
Bending moment diagram shows the variation of bending moment along the length of a beam.
Shear force is the force that acts parallel to the cross-section of the beam, while bending moment is the moment that causes bending of the be...
Rankine Cycle is a thermodynamic cycle used in steam power plants to generate electricity.
Rankine Cycle consists of four main components: a boiler, turbine, condenser, and pump.
The cycle starts with the boiler where water is heated to produce high-pressure steam.
The high-pressure steam then enters the turbine, where it expands and produces mechanical work.
After exiting the turbine, the steam enters the condenser where ...
I was interviewed in Aug 2024.
The 7QC tools are a set of quality control tools used for process improvement and problem-solving in manufacturing and other industries.
Check sheets: Used to collect and organize data for analysis.
Cause-and-effect diagrams (Fishbone diagrams): Used to identify and analyze potential causes of a problem.
Control charts: Used to monitor process variation over time.
Histograms: Used to show the frequency distribution of a se...
The 8D methodology is a problem-solving approach used to identify, correct, and prevent recurring problems.
8D stands for 8 disciplines, each representing a step in the problem-solving process
It involves creating a team, defining the problem, implementing short-term containment actions, identifying root causes, implementing permanent corrective actions, and preventing recurrence
Examples of tools used in 8D methodology i...
8D is a problem-solving methodology used in quality management to identify, correct, and prevent recurring problems.
8D stands for Eight Disciplines
It is a structured problem-solving process typically used in the automotive industry
Each discipline represents a step in the process, from defining the problem to implementing long-term solutions
Any improvement in your industry
Did you profit for any Quality process
Tractors and Farm Equipment interview questions for popular designations
I applied via Naukri.com and was interviewed in Sep 2024. There was 1 interview round.
PFMEA stands for Process Failure Mode and Effects Analysis, a structured approach to identifying and prioritizing potential failure modes in a process.
PFMEA is a proactive tool used to identify and mitigate potential failure modes in a process.
It involves identifying failure modes, their effects, causes, current controls, and recommended actions.
Risk priority numbers (RPN) are calculated to prioritize actions based on ...
APQP (Advanced Product Quality Planning) and PPAP (Production Part Approval Process) are quality management systems used in manufacturing.
APQP is a structured method for defining and establishing the steps necessary to ensure that a product satisfies the customer.
PPAP is a process used to demonstrate that a supplier can consistently deliver products that meet customer requirements.
APQP includes tasks such as defining p...
Get interview-ready with Top Tractors and Farm Equipment Interview Questions
About sales and personal info
The strength of a material can be increased by factors such as alloying, heat treatment, and cold working.
Alloying: Adding other elements to the base metal to improve its properties.
Heat treatment: Heating and cooling the material to alter its microstructure and improve its strength.
Cold working: Deforming the material at low temperatures to increase its strength.
Grain refinement: Reducing the size of grains in the mat...
Grey iron is a type of cast iron with a high carbon content and graphite flakes in its structure.
Chemical composition includes carbon (2.5-4%), silicon (1-3%), manganese (0.5-1.2%), and trace amounts of sulfur and phosphorus.
Graphite flakes give grey iron its characteristic appearance and properties.
Grey iron is known for its good machinability and damping capacity.
Common applications of grey iron include engine blocks
The question likely refers to the difficulty in distinguishing between the colors 'sg' and 'grey'.
The letters 'sg' are not commonly used together in English, making it harder to interpret compared to the word 'grey'.
Context and familiarity play a big role in understanding language nuances.
Visual perception can also affect how easily we differentiate between similar colors or words.
To increase pearlite, the cooling rate of the material needs to be decreased.
Decrease the cooling rate of the material
Increase the carbon content in the material
Maintain a proper austenitizing temperature for the material
Very basic topics were given to us
I applied via Approached by Company and was interviewed in Feb 2024. There was 1 interview round.
I have 5 years of experience operating injection moulding machines.
I have 5 years of hands-on experience operating injection moulding machines.
I am familiar with setting up, monitoring, and troubleshooting injection moulding processes.
I have worked with various types of injection moulding machines and materials.
I have a strong understanding of safety protocols and quality control measures in injection moulding.
I have t...
Top trending discussions
Some of the top questions asked at the Tractors and Farm Equipment interview -
The duration of Tractors and Farm Equipment interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 113 interviews
Interview experience
based on 2.1k reviews
Rating in categories
Assistant Manager
338
salaries
| ₹0 L/yr - ₹0 L/yr |
Field Officer
268
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
205
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
177
salaries
| ₹0 L/yr - ₹0 L/yr |
Territory Manager
171
salaries
| ₹0 L/yr - ₹0 L/yr |
Mahindra Farm Equipment
Sonalika Tractors
John Deere
Escorts Kubota Limited