Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Tractors and Farm Equipment Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 27 Oct 2024

Tractors and Farm Equipment Graduate Engineer Trainee (Get) Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Technical+ few Aptitude

Round 2 - Group Discussion 

EV,AI .The GD Round was conducted around 15 mins where each one of them given chance to speak

Round 3 - One-on-one 

(2 Questions)

  • Q1. What is Shear force and Bending Moment Diagrams
  • Ans. 

    Shear force and Bending Moment Diagrams are graphical representations of the internal forces acting on a beam.

    • Shear force diagram shows the variation of shear force along the length of a beam.

    • Bending moment diagram shows the variation of bending moment along the length of a beam.

    • Shear force is the force that acts parallel to the cross-section of the beam, while bending moment is the moment that causes bending of the be...

  • Answered by AI
  • Q2. Draw the Rankine Cycle
  • Ans. 

    Rankine Cycle is a thermodynamic cycle used in steam power plants to generate electricity.

    • Rankine Cycle consists of four main components: a boiler, turbine, condenser, and pump.

    • The cycle starts with the boiler where water is heated to produce high-pressure steam.

    • The high-pressure steam then enters the turbine, where it expands and produces mechanical work.

    • After exiting the turbine, the steam enters the condenser where ...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Basic questions of reasoning..

Round 3 - Group Discussion 

Current topics such as moonlighting and role of language in education

Round 4 - HR 

(2 Questions)

  • Q1. Simple HR questions were asked..
  • Q2. Why you have opted for this branch in graduation

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence is the foremost important thing.. Be confident and achieve your goal

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

Interview questions from similar companies

I was interviewed in Jan 2017.

Interview Questionnaire 

4 Questions

  • Q1. Tell us about yourself?
  • Ans. 

    I am a recent graduate with a degree in engineering, eager to learn and contribute to a dynamic team.

    • Recent graduate with a degree in engineering

    • Passionate about learning and contributing to a team

    • Eager to apply theoretical knowledge in practical scenarios

  • Answered by AI
  • Q2. What is your GPA?
  • Ans. 

    My GPA is 3.8 out of 4.0, reflecting my strong academic performance.

    • My GPA is 3.8 out of 4.0

    • It demonstrates my consistent academic excellence

    • I have excelled in courses such as Engineering Mathematics and Thermodynamics

  • Answered by AI
  • Q3. What is your final year project?
  • Ans. 

    My final year project was designing and implementing a smart irrigation system using IoT technology.

    • Developed a system to monitor soil moisture levels and weather conditions in real-time

    • Implemented automated watering schedules based on data collected

    • Utilized IoT devices such as sensors and actuators for efficient water usage

    • Designed a user-friendly interface for remote monitoring and control

    • Conducted field tests to val

  • Answered by AI
  • Q4. Questions on my final year project

Interview Preparation Tips

Round: Group Discussion
Experience: Alot of people wanted to speak first and prove their points.My point was viewed by most of the gd members.
Tips: Don't fight over a point. It's a discussion not a debate.
Duration: 15 minutes

Round: Technical + HR Interview
Experience: I entered the room , greeted everyone. First question was tell us about yourself followed by my GPA score. Then they asked me about my final year project and how will it change the industry and technicalities regarding my final year project.
Tips: Be calm and confident

College Name: VIT Vellore

I was interviewed in Aug 2017.

Interview Questionnaire 

2 Questions

  • Q1. Project based questions, dbms questions (join),operating system questions ,data structure concepts and questions ,language you are master of questions(mine was java) and mind busting questions to check ho...
  • Q2. Strength,weakness, why this company, what is your dream project,and etc.

Interview Preparation Tips

Round: Test
Experience: An online test was held in our college.it included 3 sections technical section as well as aptitude section which included some of the language (English ) also.
Tips: Tips would be not to switch the window coz you will be disqualified if you do so and try to answer the questions systematically in my opinion it will be considered during assessment of your test.
Duration: 45 minutes
Total Questions: 45

Round: Technical Interview
Tips: Be confident. Even you are not able to answer their questions just say sorry sir I doNt know this question don't act like a dumb they assess you on how confidently you answer their questions .

Round: HR Interview
Tips: Be confident,try avoiding "no" word during iv,answer positively,do not act rude to your interviewer, do make your point if you feel like you want to oppose them but maintain a smile and answer positively and while answering donot be rude at any point.

Skills: Confidence Levels Of Students, Reflexive to their questions , Knowledge About Database Managements Systems, Data Structures
College Name: Mody University Of Science And Technology, Sikar

I was interviewed in Aug 2017.

Interview Preparation Tips

Round: Test
Experience: Level of aptitude questions was average there were questions from ratio proportion geometry etc.In technical questions from DBMS ,java ,data structure was asked
Duration: 50 minutes

Round: Technical Interview
Experience: In technical interview interviewer asked questions from every subject .They also asked questions from my project

Round: HR Interview
Experience: They ask to give introduction and from introduction they asked questions

College Name: Mody University Of Science And Technology, Sikar

I applied via Campus Placement and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Difference between car and tractor
  • Ans. 

    Cars are designed for personal transportation while tractors are designed for agricultural purposes.

    • Cars are smaller and lighter than tractors

    • Cars are designed for speed and maneuverability while tractors are designed for power and traction

    • Tractors have larger and wider wheels for better grip on rough terrain

    • Cars have more comfortable interiors and advanced features like air conditioning and entertainment systems

    • Tracto...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be comfortable, share true knowledge

I applied via Campus Placement and was interviewed in May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 
Round 3 - Technical 

(1 Question)

  • Q1. Difference between Diesel engine and Petrol Engine
  • Ans. 

    Diesel engines are more fuel-efficient and have higher torque, while petrol engines have higher power output and are more refined.

    • Diesel engines use compression ignition while petrol engines use spark ignition

    • Diesel engines have a higher compression ratio than petrol engines

    • Petrol engines have a higher power-to-weight ratio than diesel engines

    • Diesel engines are more suitable for heavy-duty vehicles while petrol engines...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for Interview before facing it
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Tell me about your family
  • Ans. 

    I come from a close-knit family of five with loving parents and two siblings.

    • Parents are supportive and encouraging

    • Have two siblings, one older and one younger

    • Family enjoys spending time together, especially during holidays

  • Answered by AI
  • Q2. Tell me about your final year project
  • Ans. 

    Developed a mobile application for tracking and managing personal fitness goals

    • Designed user-friendly interface for inputting and tracking exercise routines

    • Implemented database functionality to store user data securely

    • Incorporated features for setting and monitoring progress towards fitness goals

  • Answered by AI

I applied via Naukri.com and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Introduction.about Designing software skill. Difference B/w Petrol v/s Diesel Engine,Draw Top view,Front view and any other view of any physical object present in Room?
  • Ans. 

    Question asks about designing software skill, difference between petrol and diesel engine, and drawing physical object in room.

    • Designing software skill involves knowledge of programming languages and software development tools.

    • Petrol engines use spark ignition while diesel engines use compression ignition.

    • Top view of an object shows its plan view from the top.

    • Front view of an object shows its view from the front.

    • Drawin...

  • Answered by AI
  • Q2. Least Count of VC, Reading a vc?
  • Ans. 

    The least count of a VC (Vernier Caliper) is the smallest measurement that can be read on the scale.

    • The least count of a VC is determined by the number of divisions on the Vernier scale and the main scale.

    • The formula to calculate least count is: Least Count = (1 Main Scale Division) - (1 Vernier Scale Division)

    • For example, if the main scale has 10 divisions and the Vernier scale has 9 divisions, the least count would b...

  • Answered by AI
  • Q3. About Your Favourite subject
Round 2 - Technical 

(1 Question)

  • Q1. GD&T symbols , Machining Simbols,First angle 3rd angle projection

Interview Preparation Tips

Interview preparation tips for other job seekers - Preparation of Mechanical Engineering Drawing is must for interview
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Assignment 

Basic subjects questions from your stream.

Round 2 - Technical 

(1 Question)

  • Q1. Basic subjects questions and project questions.
Contribute & help others!
anonymous
You can choose to be anonymous

Tractors and Farm Equipment Interview FAQs

How many rounds are there in Tractors and Farm Equipment Graduate Engineer Trainee (Get) interview?
Tractors and Farm Equipment interview process usually has 3-4 rounds. The most common rounds in the Tractors and Farm Equipment interview process are Aptitude Test, Group Discussion and Resume Shortlist.
What are the top questions asked in Tractors and Farm Equipment Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Tractors and Farm Equipment Graduate Engineer Trainee (Get) interview -

  1. What is Shear force and Bending Moment Diagr...read more
  2. Draw the Rankine Cy...read more
  3. Simple HR questions were aske...read more

Recently Viewed

JOBS

Browse jobs

Discover jobs you love

COMPANY BENEFITS

KNR Constructions

20 benefits

COMPANY BENEFITS

IRB Infrastructure

60 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Atlas Copco

No Interviews

INTERVIEWS

Tractors and Farm Equipment

No Interviews

INTERVIEWS

Tractors and Farm Equipment

No Interviews

CAMPUS PLACEMENT

Government Polytechnic, Solapur

Tell us how to improve this page.

Tractors and Farm Equipment Graduate Engineer Trainee (Get) Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more
30% less than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Tractors and Farm Equipment Graduate Engineer Trainee (Get) Reviews and Ratings

based on 16 reviews

3.4/5

Rating in categories

3.4

Skill development

2.6

Work-life balance

2.9

Salary

3.3

Job security

2.9

Company culture

2.6

Promotions

3.1

Work satisfaction

Explore 16 Reviews and Ratings
Assistant Manager
338 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Officer
268 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
205 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
177 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Territory Manager
171 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Tractors and Farm Equipment with

Mahindra Farm Equipment

4.0
Compare

Sonalika Tractors

3.6
Compare

John Deere

4.1
Compare

Escorts Kubota Limited

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview