Upload Button Icon Add office photos

Filter interviews by

Action Construction Equipment Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 4 May 2022

Action Construction Equipment Graduate Engineer Trainee (Get) Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Test was easy

Round 2 - Technical 

(2 Questions)

  • Q1. Track motor swing motor hydraulic pump boom lift
  • Q2. What does hydraulic pump.do..
  • Ans. 

    A hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy.

    • Hydraulic pumps are used to generate flow and pressure in a hydraulic system.

    • They are typically driven by an electric motor or an internal combustion engine.

    • The pump takes in hydraulic fluid and pressurizes it, allowing it to perform work.

    • There are different types of hydraulic pumps, such as gear pumps, vane pumps, and piston p...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident prepare according to what.your field is .....results are rewarded efforts not

Interview questions from similar companies

I was interviewed in Jan 2017.

Interview Questionnaire 

4 Questions

  • Q1. Tell us about yourself?
  • Ans. 

    I am a recent graduate with a degree in engineering, eager to learn and contribute to a dynamic team.

    • Recent graduate with a degree in engineering

    • Passionate about learning and contributing to a team

    • Eager to apply theoretical knowledge in practical scenarios

  • Answered by AI
  • Q2. What is your GPA?
  • Ans. 

    My GPA is 3.8 out of 4.0, reflecting my strong academic performance.

    • My GPA is 3.8 out of 4.0

    • It demonstrates my consistent academic excellence

    • I have excelled in courses such as Engineering Mathematics and Thermodynamics

  • Answered by AI
  • Q3. What is your final year project?
  • Ans. 

    My final year project was designing and implementing a smart irrigation system using IoT technology.

    • Developed a system to monitor soil moisture levels and weather conditions in real-time

    • Implemented automated watering schedules based on data collected

    • Utilized IoT devices such as sensors and actuators for efficient water usage

    • Designed a user-friendly interface for remote monitoring and control

    • Conducted field tests to val

  • Answered by AI
  • Q4. Questions on my final year project

Interview Preparation Tips

Round: Group Discussion
Experience: Alot of people wanted to speak first and prove their points.My point was viewed by most of the gd members.
Tips: Don't fight over a point. It's a discussion not a debate.
Duration: 15 minutes

Round: Technical + HR Interview
Experience: I entered the room , greeted everyone. First question was tell us about yourself followed by my GPA score. Then they asked me about my final year project and how will it change the industry and technicalities regarding my final year project.
Tips: Be calm and confident

College Name: VIT Vellore

Interview Questionnaire 

2 Questions

  • Q1. Give name of first 20 elements of periodic table
  • Ans. 

    The first 20 elements of the periodic table are essential building blocks of matter.

    • The first element is Hydrogen (H)

    • The second element is Helium (He)

    • The third element is Lithium (Li)

    • The fourth element is Beryllium (Be)

    • The fifth element is Boron (B)

    • The sixth element is Carbon (C)

    • The seventh element is Nitrogen (N)

    • The eighth element is Oxygen (O)

    • The ninth element is Fluorine (F)

    • The tenth element is Neon (Ne)

    • The eleventh...

  • Answered by AI
  • Q2. What is laminar flow and tubulent flow?
  • Ans. 

    Laminar flow is a smooth, orderly flow of fluid while turbulent flow is a chaotic, irregular flow.

    • Laminar flow occurs at low velocities and is characterized by layers of fluid moving parallel to each other.

    • Turbulent flow occurs at high velocities and is characterized by eddies and swirls in the fluid.

    • Laminar flow is commonly observed in blood vessels while turbulent flow is observed in rivers and oceans.

    • The transition ...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Good
Tips: Focus on basic
Duration: 3 hrs minutes
Total Questions: 150

Round: Group Discussion
Experience: Good
Tips: Express your Idea clearly.
Don,t go with the mass flow or change your opnion during discussion.
Give chance to other people to express their idea.
Adhere to your beliveing and strengthen your points with solid proof or example.

Round: Technical Interview
Experience: Good
Tips: Keep calm and don't get nervous.
Don't get worried if you do not know some answer.
If you don't to answer say politely that you don't know answer rather than giving wrong answer.

Skills: Technical knowledge, Problem solving capability, Communication skills, Under stress workability
College Name: SVNIT
Motivation: L&T is one of the leading company in the field of the heavy metal engineering.
It can give you good knowledge of working in the heavy metal industries.

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself?

Interview Preparation Tips

Round: Test
Experience: Most of the questions are not so difficult.
Duration: 60 minutes

Round: Technical Interview
Experience: As Iam a Electrical student, I was asked questions on Transformers(like transformer losses), Power systems, Electrical machines(two machine ratings were given and Iam asked to find which is more cost efficient), Electronics(like Adder, Subtractor, Truth Tables etc.,) and on my elective i.e New Enterprise Creation and Management(NECM).

Skill Tips: Concentrate on learning concepts and applying them for practical purposes.
College Name: NIT WARANGAL

Interview Preparation Tips

Round: Test
Experience: Questions were general aptitude ranging from analytical reasoning,verbal,quant,reading comprehension and also non verbal total time allotted was 75 minutes and there was sectional cut off for each of the sections.
Duration: 75 minutes

Round: Technical Interview
Experience: Interview was the most important pat of the selection process questions were purely technical .they asked about my project paper presented and training and gave some practical problems interview was for 45-50 minutes.
Tips: Required a good understanding of the core subjects like manufacturing and machine tools.

Round: HR Interview
Experience: HR was apart of the technical assessment itself they inquired about my background and my interest to join the company.

Skill Tips: In the interview the interviewer seemed to put stress on me in the last to judge my temperament rest was all routine type of procedure they followed. L&T is a company that looks for a candidate good in the core subjects rest things like communication and attitude comes second to them so be prepared for the interview and solve some basic aptitude questions before sitting for the company.
College Name: NIT WARANGAL

Interview Questionnaire 

7 Questions

  • Q1. Which are your favourite subjects and topics?
  • Ans. 

    My favorite subjects are Mathematics, Physics, and Computer Science.

    • I enjoy solving complex mathematical problems and equations.

    • I find the laws of physics fascinating and enjoy learning about them.

    • I am interested in programming and enjoy learning new coding languages and techniques.

  • Answered by AI
  • Q2. Which are common IS codes used and what are their revisions?
  • Ans. 

    Common IS codes and their revisions used in engineering

    • IS 456:2000 - Code of practice for plain and reinforced concrete

    • IS 800:2007 - Code of practice for general construction in steel

    • IS 1893:2016 - Criteria for earthquake resistant design of structures

    • IS 1343:2012 - Code of practice for prestressed concrete

    • IS 383:2016 - Coarse and fine aggregates for concrete

    • IS 10262:2019 - Concrete mix proportioning guidelines

    • IS 1200:...

  • Answered by AI
  • Q3. Draw SFD of continuous beam
  • Ans. 

    Draw SFD of continuous beam

    • Identify the support reactions

    • Cut the beam at a section and draw the free body diagram

    • Determine the shear force at the section

    • Plot the shear force diagram

    • Determine the bending moment at the section

    • Plot the bending moment diagram

    • Repeat for all sections of the beam

  • Answered by AI
  • Q4. What's your major project topic? Explain
  • Ans. 

    My major project topic was on developing a smart irrigation system using IoT.

    • The project aimed to optimize water usage in agriculture by using sensors and IoT technology.

    • The system was designed to collect data on soil moisture, temperature, and humidity to determine the water requirements of crops.

    • Based on the data collected, the system would automatically control the irrigation process, reducing water wastage and incr...

  • Answered by AI
  • Q5. Why did you take up civil engineering?
  • Ans. 

    I took up civil engineering because of my interest in designing and constructing buildings and infrastructure.

    • I have always been fascinated by the process of building and creating things

    • I enjoy problem-solving and finding solutions to complex challenges

    • Civil engineering offers a wide range of career opportunities in various sectors such as construction, transportation, and environmental engineering

    • I believe that civil ...

  • Answered by AI
  • Q6. Why are you interested in L&T?
  • Ans. 

    I am interested in L&T because of its reputation as a leading engineering and construction company.

    • L&T has a strong presence in various sectors such as infrastructure, power, and defense.

    • The company has a reputation for delivering high-quality projects on time and within budget.

    • L&T offers excellent opportunities for career growth and development.

    • I am impressed by L&T's commitment to sustainability and social responsibi...

  • Answered by AI
  • Q7. Are you ready to work at anyplace in India?
  • Ans. 

    Yes, I am willing to work at anyplace in India.

    • I am open to exploring new places and cultures.

    • I am adaptable and can adjust to new environments.

    • I am excited to work with diverse teams and learn from them.

    • I am committed to my career and willing to go the extra mile.

    • I understand that working in different locations can broaden my experience and skills.

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Good
Duration: 90 minutes

Round: Technical Interview
Experience: Not that great. Nervous as this was my first interview.
Tips: Just be confident.

Round: HR Interview
Experience: Again nervous but not that bad.
Tips: Speak frankly.

Skills: Technical Understanding, Speed, Confi
College Name: NIT Surathkal

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself

Interview Preparation Tips

Round: Test
Experience: Questions were from number system, probablity , common analytical reasoning questions, some questions from vocabulary.
Duration: 150 minutes

Round: Technical Interview
Experience: There was only one round of PI which was completely technical. the following were some of the questions :
1. questions from stress strain diagram of steels 
2. FeFe3C diagram 
3. fatigue and creep 
4. TTT diagram make sure you have an answer to your favorite subject.

Round: HR Interview
Experience: There was nothing like HR other than the basic question.

General Tips: LnT is the first company that visits NITW campus.there are quite a number of applicants, to crack this company you have to brush up your technical fundamentals.
Skill Tips: It was an hour of full technical grind.
College Name: NIT WARANGAL

Interview Questionnaire 

3 Questions

  • Q1. Why do you want LnT
  • Ans. 

    I am interested in LnT because of its reputation and growth potential.

    • LnT has a strong reputation in the industry for its quality work and ethical practices.

    • The company has a diverse portfolio of projects and is constantly expanding into new markets.

    • I am impressed by LnT's commitment to sustainability and social responsibility.

    • Working for LnT would provide me with opportunities for professional growth and development.

    • I...

  • Answered by AI
  • Q2. Where do you see yourself after 3 years?
  • Ans. 

    In 3 years, I see myself as a senior manager in a reputable company, leading a team of professionals and contributing to the growth of the organization.

    • Leading a team of professionals

    • Contributing to the growth of the organization

    • Continuing to learn and develop new skills

    • Networking and building relationships within the industry

  • Answered by AI
  • Q3. What are the qualities of a project manager?
  • Ans. 

    A project manager should have leadership, communication, organization, and problem-solving skills.

    • Leadership skills to guide the team towards the project goals

    • Communication skills to effectively convey information to team members and stakeholders

    • Organization skills to manage resources and timelines

    • Problem-solving skills to identify and address issues that arise during the project

    • Example: A project manager should be abl...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Maths was easy from R.S.Aggarwal, the analytical was the toughest among the 3 but not so tough.
Tips: The important chapters like time and work, time and distance, trains, percentages, sets, data interpretations.. english had antonyms, reading comprehensions, sentence completions only one or two words were unknown. Practice questions from R.S.Aggarwal. Verbal. That is a must.
Duration: 60 minutes

Round: Technical Interview
Experience: The tech interview was for one hour and ten minutes but i was asked very basic fundas. no high funda questions. project was asked. then i was questions like Bernoulli equations, prove it on the water bottle kept it on the table, some questions on ideal gas law, heat transfer questions, difference between combustion and oxidation general stuff ,it was simple. But students from mechanical and other branches were asked proper tech stuff.

Round: HR Interview
Experience: There was no hr interview as such but i was asked more HR in the interview. I was asked why do you want LnT, LnT pays low so why will u continue here. Where do you see yourself after 3 years? What are the qualities of a project manager?, will you fight for your rights etc.

Skill Tips: I would say it was a nice experience and gave me actual feel of a campus interview. For people who are looking for a hard core technical job i would say from my internship experience that this is an amazing
place to begin with even though the salary is low.
College Name: NIT WARANGAL

Interview Questionnaire 

4 Questions

  • Q1. How many years can you give to the company?
  • Ans. 

    I am committed to the company and can give my best for as long as I am needed.

    • I am dedicated to my work and take pride in my job

    • I am willing to learn and grow with the company

    • I am open to new opportunities within the company

    • I am committed to meeting the company's goals and objectives

  • Answered by AI
  • Q2. What do you expect from the company?
  • Ans. 

    I expect the company to provide a challenging and rewarding work environment with opportunities for growth and development.

    • Opportunities for career advancement

    • Support for continued learning and development

    • A positive and collaborative work culture

    • Fair compensation and benefits

    • Clear communication and transparency from management

  • Answered by AI
  • Q3. What all other fields are you interested in?
  • Ans. 

    I am interested in fields related to technology, business, and psychology.

    • Technology - Artificial Intelligence, Machine Learning, Data Science

    • Business - Marketing, Entrepreneurship, Finance

    • Psychology - Behavioral Economics, Cognitive Psychology, Social Psychology

  • Answered by AI
  • Q4. How is this company going to help you in your career?
  • Ans. 

    The company will provide me with opportunities for growth and development in my field.

    • The company offers regular training and development programs to enhance my skills.

    • I will have the chance to work on challenging projects that will help me gain experience.

    • The company has a strong reputation in the industry, which will help me build my professional network.

    • I will receive guidance and mentorship from experienced profess

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Quantitative was basic concepts like ratios, profit and loss, geometry, analytical was also involved in quantitative. English was general words few were frequently used GRE words.
Duration: 180 minutes

Round: Technical Interview
Experience: Subject of interest was asked. General practical knowledge questions were asked. Questions on project work were given more importance.

Skill Tips: The aptitude test was easy. The company has many fields,so its a good option to explore and learn. the work profile offered was good. I was told by the interviewer that you are given chance to experiment and see all the fields and can go for another if its your call. Be sure of exactly what you want from the company and why you want the company. Be thorough with the basics and very sure about your project and it need not be a very high standard work. Its all about your interest and enthusiasm to do something other than the college work.
College Name: NIT WARANGAL

Interview Preparation Tips

Round: Test
Experience: Usage of articles, General English, Synonyms, Antonyms, Passage reading. reasoning, simple maths , situational analysis were part of the test paper.
Duration: 60 minutes

Round: Technical Interview
Experience: In the technical interview the basic knowledge in civil engineering was checked and Bending moment and shear force
diagrams for a basic structure were asked and A Slab for a sump is to be laid of size 3m X 2m, for which there are two alternatives of laying slabs i.e two slabs of 1m X 3m each and three Slabs of 1m X 2m each and the best alternative was to lay three slabs of 1m X 3m so that the depth of slab can be reduced. Why the cross section of a chimney is increased from top to bottom. Typical reinforcement detailing for Structural Members and normal percentage of reinforcement adopted for different types of structures, Analysis of structures.The details about the project work that u have done in your Btech,Dip.

Round: HR Interview
Experience: In the Personal Interview the details about the family background were asked .

Skill Tips: Your Basic knowledge in subject and the communicating abilities are the most important things that were checked and the answering style was also checked whether what you are answering is answered confidently or not. and whether u are able to choose a best alternative if some of the alternatives are given. Be perfect in basics and be touch with all the subjects that u have studied irrespective of the subject that you are the most interested in. CGPA is not of a big matter if u have the subject in you and perform well in the interview but it is better to have good CGPA.
College Name: NIT WARANGAL

Action Construction Equipment Interview FAQs

How many rounds are there in Action Construction Equipment Graduate Engineer Trainee (Get) interview?
Action Construction Equipment interview process usually has 2 rounds. The most common rounds in the Action Construction Equipment interview process are Technical and Aptitude Test.
How to prepare for Action Construction Equipment Graduate Engineer Trainee (Get) interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Action Construction Equipment. The most common topics and skills that interviewers at Action Construction Equipment expect are Communication Skills, Industrial Engineering, Line Balancing, Manufacturing Engineering and Motion Study.
What are the top questions asked in Action Construction Equipment Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Action Construction Equipment Graduate Engineer Trainee (Get) interview -

  1. What does hydraulic pump.d...read more
  2. Track motor swing motor hydraulic pump boom l...read more

Tell us how to improve this page.

32% less than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Action Construction Equipment Graduate Engineer Trainee (Get) Reviews and Ratings

based on 3 reviews

2.0/5

Rating in categories

1.0

Skill development

1.1

Work-life balance

1.0

Salary

1.2

Job security

1.0

Company culture

1.0

Promotions

1.0

Work satisfaction

Explore 3 Reviews and Ratings
Assistant Manager
183 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
127 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
85 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
76 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Action Construction Equipment with

TIL

3.7
Compare

Sany Heavy Industry

3.9
Compare

Escorts Kubota Limited

4.1
Compare

BEML

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview