Upload Button Icon Add office photos

Filter interviews by

Strategic Learning Solutions Technical Trainer Interview Questions, Process, and Tips

Updated 9 Feb 2024

Strategic Learning Solutions Technical Trainer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Hard
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - HR 

(4 Questions)

  • Q1. Introduce Yourself.
  • Q2. What is your current job role?
  • Q3. Are you willing to relocate?
  • Q4. Salary Expectation?
Round 2 - Technical 

(7 Questions)

  • Q1. Tell me about after treatment system.
  • Ans. 

    An after treatment system is a system used to reduce emissions from exhaust gases.

    • After treatment systems are commonly used in vehicles to reduce harmful pollutants in exhaust gases.

    • These systems typically include components such as catalytic converters, diesel particulate filters, and selective catalytic reduction systems.

    • The purpose of an after treatment system is to treat the exhaust gases after they leave the engin...

  • Answered by AI
  • Q2. Describe starting circuit.
  • Ans. 

    The starting circuit is responsible for initiating the engine's ignition process.

    • The starting circuit consists of components such as the battery, starter motor, ignition switch, and solenoid.

    • When the ignition switch is turned on, it sends a signal to the solenoid, which then engages the starter motor.

    • The starter motor uses electrical energy from the battery to turn the engine's crankshaft, starting the combustion proce...

  • Answered by AI
  • Q3. What is CLFC Technology?
  • Ans. 

    CLFC Technology is a data compression algorithm used to reduce the size of files and improve storage efficiency.

    • CLFC stands for Context List Frequency Counting.

    • It is commonly used in file compression software like WinZip and 7-Zip.

    • CLFC technology analyzes the frequency of data patterns and replaces them with shorter codes.

    • This compression technique helps in reducing file sizes and optimizing storage space.

    • It is based o...

  • Answered by AI
  • Q4. What is Sensor and actuator?
  • Ans. 

    A sensor is a device that detects and measures physical or chemical properties, while an actuator is a device that produces a physical action or response based on input.

    • Sensors convert physical or chemical properties into electrical signals.

    • Actuators convert electrical signals into physical actions or responses.

    • Examples of sensors include temperature sensors, pressure sensors, and motion sensors.

    • Examples of actuators i

  • Answered by AI
  • Q5. SCR System Process
  • Q6. What is DPF Regeneration Process?
  • Ans. 

    DPF Regeneration Process is a method used to clean the diesel particulate filter (DPF) in a vehicle's exhaust system.

    • DPF Regeneration Process is necessary to prevent the DPF from becoming clogged with soot and other particles.

    • During the regeneration process, the engine's control unit increases the exhaust temperature to burn off the accumulated soot.

    • There are two types of DPF regeneration: passive regeneration and acti...

  • Answered by AI
  • Q7. What is Thermal Management?
  • Ans. 

    Thermal management refers to the process of controlling and maintaining the temperature of electronic devices or systems.

    • Thermal management involves techniques to dissipate heat generated by electronic components.

    • It ensures that the temperature of electronic devices remains within safe operating limits.

    • Techniques used in thermal management include heat sinks, fans, thermal interface materials, and liquid cooling system...

  • Answered by AI
Round 3 - Client Interview 

(12 Questions)

  • Q1. Introduce Yourself
  • Q2. Tell me about After treatment system
  • Ans. 

    After treatment system is a system used to reduce harmful emissions from exhaust gases.

    • After treatment system is commonly used in automotive industry to reduce pollutants emitted by vehicles.

    • It typically includes components such as catalytic converters, diesel particulate filters, and selective catalytic reduction systems.

    • The system works by converting harmful gases and particles into less harmful substances before the...

  • Answered by AI
  • Q3. Describe Starting Circuit
  • Ans. 

    The starting circuit is responsible for initiating the engine's combustion process.

    • The starting circuit consists of components such as the battery, starter motor, ignition switch, and solenoid.

    • When the ignition switch is turned to the start position, it sends a signal to the solenoid, which engages the starter motor.

    • The starter motor then cranks the engine, causing the pistons to move and the combustion process to begi...

  • Answered by AI
  • Q4. What is the CNG filling Pressure?
  • Ans. 

    The CNG filling pressure refers to the pressure at which compressed natural gas is filled into a CNG vehicle's fuel tank.

    • CNG filling pressure is typically measured in units of pressure, such as psi (pounds per square inch) or bar.

    • The specific filling pressure may vary depending on the country, vehicle type, and CNG system.

    • In some countries, the standard CNG filling pressure is around 200 bar (2900 psi).

    • However, it is i...

  • Answered by AI
  • Q5. Name the Components of CNG low pressure System
  • Ans. 

    The components of a CNG low pressure system include the CNG tank, pressure regulator, fuel lines, and pressure gauge.

    • CNG tank: Stores the compressed natural gas.

    • Pressure regulator: Controls the pressure of the gas before it enters the engine.

    • Fuel lines: Transports the CNG from the tank to the engine.

    • Pressure gauge: Measures the pressure of the gas in the system.

  • Answered by AI
  • Q6. Tell me about HT coil and its Location
  • Ans. 

    The HT coil, also known as the high-tension coil, is an essential component in the ignition system of an internal combustion engine.

    • The HT coil is responsible for generating a high voltage current that is necessary to create a spark in the spark plugs.

    • It is typically located near the distributor or ignition module in the engine compartment.

    • The HT coil consists of a primary winding and a secondary winding, which are wra...

  • Answered by AI
  • Q7. How to test a spark plug?
  • Ans. 

    To test a spark plug, you can perform a visual inspection, check for spark, and measure resistance.

    • Inspect the spark plug for any signs of damage or wear, such as cracks or excessive carbon buildup.

    • Remove the spark plug and connect it to the spark plug wire. Ground the spark plug against the engine block and crank the engine to check for a spark.

    • Use a multimeter to measure the resistance of the spark plug. Compare the

  • Answered by AI
  • Q8. How to identify a spark plug is bad by only viewing
  • Ans. 

    A bad spark plug can be identified by its physical appearance and signs of damage.

    • Inspect the spark plug for signs of fouling, such as black soot or oil deposits.

    • Look for physical damage, such as cracks or corrosion on the spark plug.

    • Check the electrode for wear or erosion, which can indicate a bad spark plug.

    • Compare the appearance of the spark plug to a reference chart or consult the manufacturer's specifications.

    • Perf...

  • Answered by AI
  • Q9. How many types of battery are there used in automobile
  • Ans. 

    There are mainly three types of batteries used in automobiles: lead-acid batteries, lithium-ion batteries, and nickel-metal hydride batteries.

    • Lead-acid batteries are the most common type of battery used in automobiles.

    • Lithium-ion batteries are becoming increasingly popular due to their higher energy density and longer lifespan.

    • Nickel-metal hydride batteries are also used in some hybrid vehicles.

    • Other types of batteries...

  • Answered by AI
  • Q10. Tell me about EV battery
  • Ans. 

    EV battery is a rechargeable battery used to power electric vehicles.

    • EV batteries store electrical energy to power electric vehicles.

    • They are typically lithium-ion batteries.

    • EV batteries have a higher energy density compared to traditional lead-acid batteries.

    • They provide the necessary power for the electric motor to propel the vehicle.

    • EV batteries can be charged through various methods such as plug-in charging station...

  • Answered by AI
  • Q11. What is Regenerative Braking System
  • Ans. 

    Regenerative braking system is a mechanism that converts the kinetic energy of a moving vehicle into electrical energy.

    • It is commonly used in electric and hybrid vehicles.

    • During braking, the system uses the electric motor to reverse its operation and act as a generator.

    • The generated electrical energy is then stored in a battery or used to power other vehicle systems.

    • This system helps in improving fuel efficiency and re...

  • Answered by AI
  • Q12. Tell me about SCR System with chemical reactions.
  • Ans. 

    SCR system with chemical reactions is used to reduce nitrogen oxide emissions from diesel engines.

    • SCR stands for Selective Catalytic Reduction.

    • It involves injecting a urea-based solution into the exhaust stream.

    • The urea reacts with nitrogen oxides (NOx) in the presence of a catalyst, converting them into nitrogen and water.

    • The catalyst used is usually made of materials like titanium dioxide or zeolite.

    • SCR systems are c...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - English Speaking Skills, In depth Technical Knowledge about new Improvements in the Automobile industry.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Hardware, outlook, smps
Round 2 - HR 

(1 Question)

  • Q1. Why should i hire you

Interview Preparation Tips

Topics to prepare for Imarque Solutions Technical Support Engineer interview:
  • Cloud Computing
Interview preparation tips for other job seekers - Be confident
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. Basic Cloud telephony questions and having relevant experience is an add on
  • Q2. What is click to call solution
  • Ans. 

    Click to call solution is a technology that allows users to initiate phone calls by clicking on a button or link.

    • Enables users to easily connect with customer support or sales representatives

    • Commonly used in websites and mobile apps

    • Improves customer experience by providing instant communication

    • Examples include ClickDesk, CallRail, and Twilio's Click to Call feature

  • Answered by AI
  • Q3. What is a PRI in cloud telephony
  • Ans. 

    PRI in cloud telephony stands for Primary Rate Interface, a type of digital telecommunication service used to connect a large number of phone lines to the public switched telephone network (PSTN) in a cost-effective manner.

    • PRI provides 23 voice channels and 1 data channel for a total of 24 channels.

    • It is commonly used by businesses for high-volume voice communication.

    • PRI offers better call quality and reliability compa...

  • Answered by AI
  • Q4. Difference between Virtual number and DID
  • Ans. 

    Virtual number is a cloud-based number that forwards calls to another number, while DID is a direct inward dialing number that allows direct calls to a specific extension.

    • Virtual number is a cloud-based number that can be forwarded to any other number.

    • DID is a direct inward dialing number that allows direct calls to a specific extension.

    • Virtual numbers are often used for marketing or customer service purposes.

    • DID numbe...

  • Answered by AI
  • Q5. How to perform native Integration
  • Ans. 

    Native integration involves connecting two or more software applications without the need for additional middleware.

    • Identify the APIs or protocols supported by the applications you want to integrate

    • Develop custom code to establish communication between the applications

    • Test the integration thoroughly to ensure data flows accurately and securely

  • Answered by AI

Skills evaluated in this interview

I applied via Company Website and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Basics of firewall, packet flow, real time issues,

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on basics instead of overview. if your basics are strong you can work on any technology.

Strategic Learning Solutions Interview FAQs

How many rounds are there in Strategic Learning Solutions Technical Trainer interview?
Strategic Learning Solutions interview process usually has 3 rounds. The most common rounds in the Strategic Learning Solutions interview process are HR, Technical and Client Interview.
How to prepare for Strategic Learning Solutions Technical Trainer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Strategic Learning Solutions. The most common topics and skills that interviewers at Strategic Learning Solutions expect are Technical Training, Diagnosis, Service Engineering, Troubleshooting and Automobile.
What are the top questions asked in Strategic Learning Solutions Technical Trainer interview?

Some of the top questions asked at the Strategic Learning Solutions Technical Trainer interview -

  1. How to identify a spark plug is bad by only view...read more
  2. How many types of battery are there used in automob...read more
  3. Tell me about SCR System with chemical reactio...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Strategic Learning Solutions interview
Referral
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.2k Interviews
Infosys Interview Questions
3.7
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.5k Interviews
Tech Mahindra Interview Questions
3.6
 • 3.8k Interviews
HCLTech Interview Questions
3.5
 • 3.7k Interviews
LTIMindtree Interview Questions
3.9
 • 2.9k Interviews
KPIT Technologies Interview Questions
3.5
 • 285 Interviews
NIIT Interview Questions
3.6
 • 81 Interviews
View all
Strategic Learning Solutions Technical Trainer Salary
based on 72 salaries
₹3.5 L/yr - ₹7.8 L/yr
24% more than the average Technical Trainer Salary in India
View more details

Strategic Learning Solutions Technical Trainer Reviews and Ratings

based on 24 reviews

4.1/5

Rating in categories

3.7

Skill development

3.8

Work-Life balance

3.6

Salary & Benefits

3.6

Job Security

3.6

Company culture

3.2

Promotions/Appraisal

3.5

Work Satisfaction

Explore 24 Reviews and Ratings
Technical Trainer
72 salaries
unlock blur

₹3.5 L/yr - ₹7.8 L/yr

Training Specialist
24 salaries
unlock blur

₹6 L/yr - ₹12.1 L/yr

Training Administrator
22 salaries
unlock blur

₹2.5 L/yr - ₹4.2 L/yr

Sales Trainer
20 salaries
unlock blur

₹3.8 L/yr - ₹7.6 L/yr

Project Manager
19 salaries
unlock blur

₹4.6 L/yr - ₹12 L/yr

Explore more salaries
Compare Strategic Learning Solutions with

NIIT

3.6
Compare

TCS

3.7
Compare

Wipro

3.7
Compare

Infosys

3.7
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview