Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Spark Minda Team. If you also belong to the team, you can get access from here

Spark Minda Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Spark Minda Production & Quality Engineer Interview Questions, Process, and Tips

Updated 29 Jul 2022

Spark Minda Production & Quality Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed in Jun 2022. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. How do you handle uncooperative staff?
  • Ans. 

    To handle uncooperative staff, it is important to communicate effectively, address concerns, provide support, and establish clear expectations.

    • Open communication channels to understand the reasons for uncooperativeness

    • Address any concerns or issues raised by the staff

    • Provide necessary support, training, or resources to help staff perform their tasks effectively

    • Establish clear expectations and goals, ensuring everyone u...

  • Answered by AI
  • Q2. How do you insure the quality Engineer and product
  • Ans. 

    To ensure quality, a production & quality engineer can implement various measures such as conducting inspections, implementing quality control processes, and using statistical analysis.

    • Conduct regular inspections to identify any defects or issues in the production process.

    • Implement quality control processes to ensure that products meet the required standards.

    • Use statistical analysis techniques to monitor and improve pr...

  • Answered by AI
  • Q3. Can you describe a recent project in which you successfully implemented quality control procedures?
  • Ans. 

    Implemented quality control procedures in a project for improving product reliability.

    • Identified critical components and their failure modes

    • Developed test plans and procedures to validate component reliability

    • Implemented statistical process control to monitor production process

    • Conducted root cause analysis and implemented corrective actions

    • Reduced product failure rate by 30% and improved customer satisfaction

  • Answered by AI
  • Q4. Can you describe how you investigate production flaws? ...
  • Ans. 

    I investigate production flaws by analyzing data, observing processes, and conducting tests.

    • Collect and analyze data on the production process

    • Observe the production process to identify potential flaws

    • Conduct tests to confirm the cause of the flaw

    • Collaborate with production team to develop solutions

    • Implement solutions and monitor results

    • Document findings and share with relevant stakeholders

  • Answered by AI
  • Q5. Why is a project quality plan important
  • Ans. 

    A project quality plan is important to ensure that the project meets the required quality standards and customer expectations.

    • Helps to identify quality objectives and requirements

    • Defines quality control and assurance activities

    • Ensures compliance with industry standards and regulations

    • Reduces the risk of defects and rework

    • Improves customer satisfaction and trust

    • Provides a framework for continuous improvement

    • Helps to man

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - QE, automating processes is the answer to improving velocity and at the same time eliminate errors that occur due to manual intervention. With DevOps, organizations need to establish QE processes with Shift Left mentality, Automated Quality Assurance, Automation tools, and Continuous Integration to ensure quality from the beginning. This makes embedding QE in Agile and DevOps an urgent action item for organizations. Defining processes and adhering to them help in creating patterns across the organization to determine what is working and the impact of the QE program. Automated processes establish the same communication language across the organization making it a whole-team language and initiative.

Although People create the biggest difference, the selection of the right tool gives an extra edge against the competition. Various tools claiming to do similar things crowd the testing landscape. Mapping these tools against the Testing Quadrants (Read on to find out more about them) is a good starting point but can be overwhelming. This clouds the decision about selecting the right tools and integrating them in current tool chain. Most of the tool selection decisions get highly influenced by vendor marketing, team members’, and self-intuition. It is a good approach to clear the confusion by appointing specialized Quality Engineering consultants to lead the end-to-end QE program by using cutting-edge tools, modern engineering practices, and proprietary testing frameworks.

Interview questions from similar companies

I applied via Naukri.com

Interview Questionnaire 

2 Questions

  • Q1. Ralated to quality
  • Ans. 

    Quality is the degree of excellence of a product or service.

    • Quality is achieved by meeting customer requirements and expectations.

    • Quality control involves inspecting and testing products to ensure they meet standards.

    • Continuous improvement is essential for maintaining and improving quality.

    • Quality management systems such as ISO 9001 provide a framework for ensuring quality.

    • Poor quality can lead to customer dissatisfact

  • Answered by AI
  • Q2. Related to production

Interview Preparation Tips

Interview preparation tips for other job seekers - interview just happened and no call or no sms

Interview Questionnaire 

3 Questions

  • Q1. Regarding some steel grade
  • Q2. Regarding ctc and date of joini g after geting of offer
  • Q3. About transporting

Interview Preparation Tips

Round: Group Discussion
Experience: Some technical discussion regarding alloy steel making

I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Qms related all questions (ISO/IATF). And how development of products in process, Processe controls
  • Q2. How can improve communication and personality
  • Ans. 

    Improving communication and personality requires self-awareness, active listening, and continuous learning.

    • Practice active listening to understand others' perspectives

    • Be aware of your own communication style and adjust as needed

    • Seek feedback and be open to constructive criticism

    • Read books or take courses on communication and interpersonal skills

    • Practice empathy and emotional intelligence

    • Be respectful and courteous in a

  • Answered by AI
  • Q3. How can show your potential
  • Q4. How can show first impressions
  • Ans. 

    First impressions can be shown through body language, attire, and communication skills.

    • Body language can convey confidence or nervousness

    • Attire can show professionalism or lack thereof

    • Communication skills can demonstrate intelligence and articulation

    • Eye contact and a firm handshake can also make a positive impression

  • Answered by AI

I applied via Naukri.com and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Rules and regulations , work position

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview was a technical it lasted for 30 minutes. The interviewer wanted to test my knowledge and communication skills mostly questions asked to my work related

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

7 Questions

  • Q1. Which types of lacquer used on lens and Housing ?
  • Ans. 

    The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.

    • Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.

    • Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.

    • Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for

  • Answered by AI
  • Q2. What is size fine filter ?
  • Ans. 

    A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.

    • Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.

    • They are designed to capture particles that are smaller than what can be filtered by regular filters.

    • These filters can be made of various materials such as paper, fabric, or synthetic fibers.

    • Examples of size ...

  • Answered by AI
  • Q3. On which material direct metalizing is applicable ?
  • Ans. 

    Direct metalizing is applicable on materials that can conduct electricity.

    • Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.

    • The material should be able to conduct electricity for direct metalizing to be applicable.

    • Materials like plastic, glass, and ceramics can be direct metalized.

    • Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.

  • Answered by AI
  • Q4. PC Material
  • Q5. How much UV energy is required for curing?
  • Ans. 

    The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.

    • UV energy required for curing varies depending on the material being cured

    • Intensity of the UV light also affects the amount of energy required

    • UV energy is typically measured in Joules per square centimeter (J/cm²)

    • Examples of materials that require UV curing include adhesives, coatings, and inks

  • Answered by AI
  • Q6. 2500 ~ 3500
  • Q7. How much DFT is required as per standard ?
  • Ans. 

    The amount of DFT required as per standard varies depending on the specific industry and project requirements.

    • The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.

    • Different industries may have different standards for DFT.

    • The complexity and size of the project also influence the amount of DFT required.

    • DFT techniques include scan chains, built-in self-test (BI...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It must be done as like process catroled

Interview Questionnaire 

1 Question

  • Q1. Work in shifts, Qcc , Line balancing , Kaziens , Achievement in your experience individually and in team .

I applied via Recruitment Consulltant and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Basic information about current role and responsibilities
  • Q2. Why you want to change the current company
  • Q3. Family background and qualifications

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident to give answer. Not hesitate during interaction

I applied via Walk-in

Round 1 - Technical 

(1 Question)

  • Q1. What is your current role and responsibility
Round 2 - One-on-one 

(1 Question)

  • Q1. Why you are leaving your current job

Interview Preparation Tips

Interview preparation tips for other job seekers - Please ready with all technical answer with weel study

Spark Minda Interview FAQs

How many rounds are there in Spark Minda Production & Quality Engineer interview?
Spark Minda interview process usually has 1 rounds. The most common rounds in the Spark Minda interview process are Technical.
How to prepare for Spark Minda Production & Quality Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Spark Minda. The most common topics and skills that interviewers at Spark Minda expect are Mechanical Engineering, Production and Quality Engineering.
What are the top questions asked in Spark Minda Production & Quality Engineer interview?

Some of the top questions asked at the Spark Minda Production & Quality Engineer interview -

  1. Can you describe a recent project in which you successfully implemented quality...read more
  2. How do you insure the quality Engineer and prod...read more
  3. Can you describe how you investigate production flaws? ...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

JBM Group Interview Questions
4.0
 • 274 Interviews
Subros Interview Questions
3.8
 • 167 Interviews
Gabriel India Interview Questions
4.1
 • 98 Interviews
NBC Bearings Interview Questions
3.8
 • 84 Interviews
DENSO Interview Questions
4.1
 • 74 Interviews
CIE Automotive Interview Questions
3.6
 • 74 Interviews
View all
Assistant Manager
419 salaries
unlock blur

₹4.5 L/yr - ₹14.4 L/yr

Senior Engineer
235 salaries
unlock blur

₹2.2 L/yr - ₹10.1 L/yr

Deputy Manager
235 salaries
unlock blur

₹6.8 L/yr - ₹23.5 L/yr

Quality Engineer
223 salaries
unlock blur

₹1.4 L/yr - ₹5.7 L/yr

Engineer
191 salaries
unlock blur

₹2.2 L/yr - ₹6 L/yr

Explore more salaries
Compare Spark Minda with

JBM Group

4.0
Compare

Subros

3.8
Compare

Endurance Technologies

3.9
Compare

Gabriel India

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview