Spark Minda Diploma Apprentice Trainee Interview Questions and Answers

The main components of AC cycle are compressor, condenser, expansion valve and evaporator.

• Compressor compresses the refrigerant gas and raises its temperature.

• Condenser cools down the refrigerant gas and converts it into a high-pressure liquid.

• Expansion valve reduces the pressure of the liquid refrigerant and converts it into a low-pressure liquid.

• Evaporator absorbs heat from the surrounding and converts the low-pressu...read more

PPM can be found by dividing the weight of solute by the weight of solution and multiplying by 10^6.

• Determine the weight of the solute and the weight of the solution.

• Divide the weight of the solute by the weight of the solution.

• Multiply the result by 10^6 to get the PPM value.

• Example: If 1 gram of solute is dissolved in 1 million grams of solution, the PPM would be 1.

• PPM stands for parts per million and is used to expr

The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.

• Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.

• Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.

• Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for

A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.

• Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.

• They are designed to capture particles that are smaller than what can be filtered by regular filters.

• These filters can be made of various materials such as paper, fabric, or synthetic fibers.

• Examples of size ...read more

Direct metalizing is applicable on materials that can conduct electricity.

• Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.

• The material should be able to conduct electricity for direct metalizing to be applicable.

• Materials like plastic, glass, and ceramics can be direct metalized.

• Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.

The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.

• UV energy required for curing varies depending on the material being cured

• Intensity of the UV light also affects the amount of energy required

• UV energy is typically measured in Joules per square centimeter (J/cm²)

• Examples of materials that require UV curing include adhesives, coatings, and inks

The amount of DFT required as per standard varies depending on the specific industry and project requirements.

• The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.

• Different industries may have different standards for DFT.

• The complexity and size of the project also influence the amount of DFT required.

• DFT techniques include scan chains, built-in self-test (BI...read more

I have a valid driver's license for both cars and motorcycles.

• I have a Class C license for cars

• I also have a Class M license for motorcycles

• I have a clean driving record with no accidents or violations

I ride a road bike for commuting and a mountain bike for leisure.

• I prefer road bikes for their speed and efficiency on paved roads.

• I enjoy mountain biking for the challenge and adventure of off-road trails.

• I also have experience with hybrid bikes for their versatility.

• I prioritize safety and always wear a helmet and follow traffic laws.

• I have participated in charity rides and group rides for fun and community.

Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

• Testing can include physical tests such as crash tests, durability tests, and performance tests.

• Simulation and modeling can also be used to test vehicle components and systems.

• Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

We conduct various types of homologation testing depending on the product and its intended market.

• We conduct safety testing to ensure compliance with local regulations.

• We perform emissions testing to ensure compliance with environmental regulations.

• We conduct performance testing to ensure the product meets the required standards.

• We also conduct durability testing to ensure the product can withstand the expected wear an...read more