Upload Button Icon Add office photos

Sodexo

Compare button icon Compare button icon Compare

Filter interviews by

Sodexo Senior Biomedical Engineer Interview Questions and Answers

Updated 17 Dec 2024

Sodexo Senior Biomedical Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Experience in healthcare industry
  • Q2. Expertise in Medical equipment

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company for work. Join if u get opportunity

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is about 33 kv to 220 SLD
  • Ans. 

    33 kV to 220 SLD refers to a switchgear system for electrical distribution at medium voltage levels.

    • 33 kV to 220 SLD likely refers to a switchgear system designed to handle voltages between 33 kV and 220 kV.

    • SLD stands for Single Line Diagram, which is a schematic representation of the electrical distribution system.

    • This switchgear system would be used for distributing electricity from a higher voltage transmission syst...

  • Answered by AI
  • Q2. What is ACB & VCB
  • Ans. 

    ACB stands for Air Circuit Breaker and VCB stands for Vacuum Circuit Breaker.

    • ACB is a type of circuit breaker that operates in the air where the arc is drawn in the air and extinguished using air.

    • VCB is a type of circuit breaker that operates in a vacuum where the arc is drawn in a vacuum and extinguished using vacuum.

    • ACBs are commonly used in low voltage applications while VCBs are used in medium voltage applications.

    • ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Electrical equipments based questions
  • Q2. Basically on UPS TRANSFORMER FAS WLD EPMS AND BMS
  • Q3. Deeply knowledge on above things

Interview Preparation Tips

Interview preparation tips for other job seekers - Study about mentioned equipments properly and do your best

Shift Engineer Interview Questions & Answers

OCS Group user image Purushottam Gaikwad

posted on 24 Sep 2024

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Mar 2024.

Round 1 - HR 

(2 Questions)

  • Q1. How many years do you have experience
  • Ans. 

    I have 8 years of experience working as a Shift Engineer in various industries.

    • I have 8 years of experience as a Shift Engineer

    • Worked in various industries such as manufacturing, energy, and facilities management

    • Experience in troubleshooting, maintenance, and operation of equipment

    • Familiar with safety regulations and protocols

    • Led teams in shift operations and coordinated with other departments

  • Answered by AI
  • Q2. What kind of breaker you use in your previous company
  • Ans. 

    We used air circuit breakers in my previous company.

    • We used air circuit breakers for their reliability and ease of maintenance.

    • Air circuit breakers are commonly used in industrial settings for their high breaking capacity.

    • Examples of air circuit breaker brands we used include Siemens and Schneider Electric.

  • Answered by AI
Round 2 - Technical 

(3 Questions)

  • Q1. Circuit Breaker rating?
  • Ans. 

    Circuit breaker rating refers to the maximum current that the breaker can safely interrupt without causing damage.

    • Circuit breaker rating is typically expressed in amps (e.g. 15A, 20A, 30A).

    • The rating should be chosen based on the maximum current that will flow through the circuit.

    • It is important to select a circuit breaker with a rating higher than the maximum current to prevent tripping.

    • Using a circuit breaker with a ...

  • Answered by AI
  • Q2. How cycle breaker maintenance done
  • Ans. 

    Cycle breaker maintenance involves regular inspection, testing, and replacement of components to ensure proper functioning.

    • Inspecting for signs of wear or damage

    • Testing functionality with appropriate equipment

    • Replacing faulty components as needed

    • Following manufacturer's guidelines for maintenance schedule

    • Keeping detailed records of maintenance activities

  • Answered by AI
  • Q3. Cleanness the breaker the breakup from CNC Check spring charge motor resistance Shake closing call tripping coil

Interview Preparation Tips

Interview preparation tips for other job seekers - You should impressing first round hr & technical round is easy
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Current job profile, reason of changing, able to do job, salary related, always ask them too high salary then they give u a small hike.
Round 3 - Technical 

(1 Question)

  • Q1. Leadec technical team questions us, as per requirement, HR will guide you what type of questions may come.
Round 4 - Technical 

(1 Question)

  • Q1. Customer technical, all related to your work, as per his requirements.

Interview Preparation Tips

Interview preparation tips for other job seekers - Never give leadec your original documents, Always ask them for too high salary hike, they not provide any general facilities as other employer provided. It also depends on customer site. Best company for person who is going from home to site, and for persons having no job with experience.
Round 1 - HR 

(2 Questions)

  • Q1. Share details of your previous job.
  • Q2. Company introduction and JD
Round 2 - Technical 

(1 Question)

  • Q1. System releted question asking

Interview Preparation Tips

Interview preparation tips for other job seekers - You have must good knowledge of cnc system

I applied via Company Website and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Working skill and basic knowledge and department oriented questions that's all

Interview Preparation Tips

Interview preparation tips for other job seekers - First off all job seekers fully knowledge in our department and finally attended the interviews. BEST OF LUCK.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Parts of pumps and motors
  • Ans. 

    Parts of pumps and motors include impeller, casing, shaft, bearings, and seals.

    • Impeller: Rotating component that generates the flow in a pump.

    • Casing: Encloses and supports the impeller and other parts of the pump.

    • Shaft: Transfers power from the motor to the impeller.

    • Bearings: Support and align the shaft within the pump.

    • Seals: Prevent leakage of fluid from the pump.

  • Answered by AI
  • Q2. About conveyor and their problems
Round 2 - Technical 

(3 Questions)

  • Q1. About conveyors and problems
  • Q2. Parts of pumps and motors
  • Ans. 

    Parts of pumps and motors include impeller, casing, shaft, bearings, and motor housing.

    • Impeller: Rotating component that generates the flow within the pump.

    • Casing: Encloses the impeller and directs the flow of fluid through the pump.

    • Shaft: Transfers the rotational energy from the motor to the impeller.

    • Bearings: Support the shaft and reduce friction during rotation.

    • Motor housing: Encloses the motor and provides protecti

  • Answered by AI
  • Q3. About yaskawa robot

I applied via Referral and was interviewed in Jan 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. All Technical questions related to commercial site

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was related to technical issues majorly LT,HT,VCB,ACB ,relays,WTP, STP HVAC it was a phone call interview it held approx 45 mins I couldn't give some answers but after interview my interviewer briefed me about that.

I applied via Walk-in and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Why are hiring you
  • Q2. What challenges face at site
  • Ans. 

    The challenges faced at site include equipment breakdowns, safety hazards, and meeting production targets.

    • Equipment breakdowns can cause delays and require quick repairs to minimize downtime.

    • Safety hazards must be identified and addressed to ensure the well-being of workers.

    • Meeting production targets can be challenging due to unforeseen circumstances or unexpected changes in demand.

    • Coordination with other departments a...

  • Answered by AI
  • Q3. What is Salary expectation

Interview Preparation Tips

Interview preparation tips for other job seekers - Before interview kindly update your self ,and always go to civil dress in any interview

Sodexo Interview FAQs

How many rounds are there in Sodexo Senior Biomedical Engineer interview?
Sodexo interview process usually has 1 rounds. The most common rounds in the Sodexo interview process are HR.
How to prepare for Sodexo Senior Biomedical Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Sodexo. The most common topics and skills that interviewers at Sodexo expect are Medical Equipment and Service Engineering.

Tell us how to improve this page.

Sodexo Senior Biomedical Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

JLL Interview Questions
4.1
 • 353 Interviews
CBRE Interview Questions
4.2
 • 264 Interviews
G4S Interview Questions
4.0
 • 95 Interviews
Leadec India Interview Questions
4.1
 • 66 Interviews
BVG India Interview Questions
3.9
 • 44 Interviews
OCS Group Interview Questions
4.0
 • 41 Interviews
View all
Sodexo Senior Biomedical Engineer Salary
based on 17 salaries
₹3.2 L/yr - ₹6 L/yr
5% less than the average Senior Biomedical Engineer Salary in India
View more details

Sodexo Senior Biomedical Engineer Reviews and Ratings

based on 6 reviews

4.5/5

Rating in categories

4.5

Skill development

4.4

Work-life balance

4.5

Salary

4.7

Job security

4.7

Company culture

4.5

Promotions

4.5

Work satisfaction

Explore 6 Reviews and Ratings
Facility Executive
223 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
220 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Facility Manager
212 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Shift Engineer
190 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Facility Manager
169 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Sodexo with

Compass Group Support Services

4.1
Compare

Aramark

3.8
Compare

CBRE

4.2
Compare

Cushman & Wakefield

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview