Simar Infrastructures QA QC Engineer Interview Questions and Answers

Q1. Duties and responsibilities
Add your answer
Q2. Tests and documentations
Add your answer

Q1. About the previous projects & work procedures.
Add your answer

Q1. Salary Discussion
Add your answer

Q1. What is the construction procedure
Ans. 
Construction procedure involves planning, designing, obtaining permits, site preparation, foundation construction, framing, finishing, and inspections.
• Planning and designing the project

• Obtaining necessary permits

• Site preparation and excavation

• Foundation construction

• Framing and structural work

• Installation of utilities and systems

• Finishing touches such as painting and flooring

• Final inspections and approvals
Answered by AI
Add your answer
Q2. What's is the beam lapping position
Ans. 
Beam lapping position refers to the location where two beams overlap or intersect in a structural element.
• Beam lapping position is important for ensuring structural integrity and load-bearing capacity.

• Common beam lapping positions include end-to-end, side-by-side, and staggered lapping.

• Proper beam lapping position is determined by engineering calculations and design specifications.
Answered by AI
Add your answer
Q3. What is the tile procedure
Ans. 
The tile procedure is a method used in computer graphics to fill a region with a repeating pattern or image.
• The tile procedure involves dividing the region into smaller tiles and filling each tile with the desired pattern or image.

• It is commonly used in graphic design software to create seamless textures or backgrounds.

• The size and shape of the tiles can be adjusted to achieve different visual effects.

• Examples of tile ...read more
Answered by AI
Add your answer

About your job, location, CTC

Q1. Gdjjdnksnd shgxkdjx vhkdkxnx
Add your answer
Q2. Years of experience & expectex salary facility provided by company
Add your answer

It was good, but a bit tricky

Q1. What is the damped frequency response of a vibrating spring mass system
Ans. 
The damped frequency response of a vibrating spring mass system describes how the system responds to external forces with damping present.
• The damped frequency response is influenced by the damping ratio, natural frequency, and external forces.

• It shows how the amplitude and phase of the system's response change with varying frequencies.

• Examples of damped frequency response include automotive suspension systems and earth
Answered by AI
Add your answer
Q2. Why do you want the job
Ans. 
I am passionate about designing innovative solutions and contributing to the advancement of technology in the field of mechanical engineering.
• I have always been fascinated by the principles of mechanics and enjoy problem-solving.

• I am excited about the opportunity to work on challenging projects that push the boundaries of technology.

• I believe this job will allow me to apply my skills and knowledge to make a meaningful ...read more
Answered by AI
Add your answer

Q1. Lows of heat exchange,
Ans. 
Laws of heat exchange refer to the fundamental principles governing the transfer of heat between two bodies.
• Heat always flows from a hotter body to a colder body

• The rate of heat transfer is proportional to the temperature difference between the two bodies

• The rate of heat transfer is proportional to the surface area of contact between the two bodies

• The rate of heat transfer is inversely proportional to the distance betw...read more
Answered by AI
Add your answer
Q2. Measurements calculation
Add your answer

Q1. What are your salary expectations?
Add your answer

Q1. What is the compressive strength for the grade of M30 in day 7?
Ans. 
The compressive strength of M30 grade concrete in day 7 is 22.5 N/mm².
• The compressive strength of concrete is measured in N/mm².

• M30 grade concrete has a compressive strength of 30 N/mm² at 28 days.

• The compressive strength of M30 grade concrete at day 7 is approximately 60% of its 28-day strength.

• The compressive strength of M30 grade concrete at day 7 is 22.5 N/mm².
Answered by AI
Add your answer
Q2. Explain about mix designs
Ans. 
Mix designs are the process of determining the proportions of various ingredients to create a concrete mix with desired properties.
• Mix designs involve selecting the appropriate materials for the concrete mix

• The proportions of each material are determined based on the desired strength, workability, and durability of the concrete

• Factors such as water-cement ratio, aggregate size and type, and admixtures are considered in...read more
Answered by AI
Add your answer
Q3. What are the basic thinks before new site starts
Ans. 
Before starting a new site, certain basic things need to be considered.
• Site location and accessibility

• Availability of resources like water, electricity, and raw materials

• Environmental impact assessment

• Legal permits and approvals

• Safety measures and emergency plans

• Budget and timeline

• Project management and team coordination
Answered by AI
Add your answer
Q4. What is size of bricks,blocks and compressive strength
Ans. 
The size of bricks and blocks varies, and their compressive strength depends on the materials used.
• Bricks can range in size from 2.25 x 3.75 x 7.5 inches to 3.5 x 4.5 x 9 inches

• Blocks can range in size from 4 x 8 x 16 inches to 8 x 8 x 16 inches

• Compressive strength can range from 1,000 psi to over 10,000 psi depending on materials and manufacturing process
Answered by AI
Add your answer
Q5. What are things to consider while flooring
Ans. 
Things to consider while flooring
• Type of flooring material

• Durability and maintenance

• Moisture resistance

• Slip resistance

• Aesthetics and design

• Cost and budget

• Installation process
Answered by AI
Add your answer
Q6. Tell about ur previous experiences
Ans. 
I have previous experience working as an assistant engineer in the field of [field].
• Worked as an assistant engineer at [Company A] for [duration].

• Assisted in designing and implementing [specific projects or tasks].

• Collaborated with a team of engineers to troubleshoot and resolve technical issues.

• Utilized [specific software or tools] to analyze data and generate reports.

• Participated in regular meetings and provided upda...read more
Answered by AI
Add your answer