Upload Button Icon Add office photos

Filter interviews by

STYLAM Industries Production Engineer Interview Questions and Answers

Updated 12 Apr 2022

STYLAM Industries Production Engineer Interview Experiences

1 interview found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Lows of heat exchange,
  • Ans. 

    Laws of heat exchange refer to the fundamental principles governing the transfer of heat between two bodies.

    • Heat always flows from a hotter body to a colder body

    • The rate of heat transfer is proportional to the temperature difference between the two bodies

    • The rate of heat transfer is proportional to the surface area of contact between the two bodies

    • The rate of heat transfer is inversely proportional to the distance betw...

  • Answered by AI
  • Q2. Measurements calculation
Round 3 - HR 

(1 Question)

  • Q1. What are your salary expectations?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and show your self as you are .

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. OEE Calculation and How to Improve it
  • Ans. 

    OEE is a measure of manufacturing productivity. Improving it involves reducing downtime, increasing speed, and minimizing defects.

    • Calculate OEE by multiplying availability, performance, and quality rates.

    • Reduce downtime by improving maintenance and scheduling.

    • Increase speed by optimizing processes and equipment.

    • Minimize defects by improving quality control and training.

    • Use data analysis to identify areas for improvemen...

  • Answered by AI
  • Q2. Problem Solving tools and various uses of it
  • Ans. 

    Problem solving tools are techniques used to identify, analyze and solve problems.

    • Root Cause Analysis (RCA) helps identify the underlying cause of a problem

    • Fishbone Diagrams help identify the potential causes of a problem

    • 5 Whys technique helps identify the root cause of a problem by asking 'why' five times

    • Pareto Analysis helps prioritize problems based on their impact

    • Brainstorming helps generate ideas and solutions to ...

  • Answered by AI
  • Q3. How TPM is implemented in shopfloor
  • Ans. 

    TPM is implemented in shopfloor through a structured approach involving 5S, autonomous maintenance, and continuous improvement.

    • TPM involves a cultural shift towards proactive maintenance and continuous improvement

    • The implementation process starts with 5S to create a clean and organized workplace

    • Autonomous maintenance involves empowering operators to perform routine maintenance tasks

    • TPM also involves planned maintenance...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - OEE, Rejection and PPM,Manpower handling
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Questions will be asked on previous company roles and responsibilities.
  • Q2. Depends upon previous experience.
Round 2 - Technical 

(2 Questions)

  • Q1. Basics on structure and finishings
  • Q2. Questions on structure and finishings

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for what u wrote in resume.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About salary and experience
Round 3 - Technical 

(4 Questions)

  • Q1. Chiller trouble shooting
  • Q2. Work of cchiller
  • Ans. 

    A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle.

    • Chillers are commonly used in air conditioning systems to cool buildings or industrial processes.

    • They work by transferring heat from the liquid being chilled to a separate fluid, which is then circulated through a heat exchanger to cool it down.

    • Chillers can be water-cooled or air-cooled, depending on the app

  • Answered by AI
  • Q3. Alarm and solutions
  • Q4. Controlling andetc
Round 4 - Group Discussion 

Salary and job responsibilities

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

About how to make achieve a process in different types of products and how to perform in beyond on work.

Round 3 - Assignment 

In Which code of product is processing immediately note down the concerned register and it's specific time vs actual time mention in the register.

Interview Preparation Tips

Interview preparation tips for other job seekers - It's very simple to do the above firstly check the manpower vs production and planning vs Output, Secondary Quality vs quantity thoroughly follow-up the method of operations after that Customer vs Supply.

I applied via Naukri.com and was interviewed before May 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical Competence.Managerial Skill
  • Q2. Personal Data interview
Round 3 - Group Discussion 

General Discussion,, Expectation of Management

Round 4 - HR 

(2 Questions)

  • Q1. Salary Nigotiation one on one
  • Q2. Final date of Joining

Interview Preparation Tips

Interview preparation tips for other job seekers - No fake things should be add in Resume and also should be clear what is written in Resume

I applied via Monster and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Do u know Electrical load calculation
  • Ans. 

    Yes, electrical load calculation is the process of determining the amount of power that a building or electrical system requires.

    • Electrical load calculation involves considering the power requirements of various electrical devices and appliances in a building or system.

    • Factors such as voltage, current, and power factor are taken into account during the calculation.

    • Load calculation helps in determining the appropriate s...

  • Answered by AI
  • Q2. Site experince
  • Q3. Achievement in carrer
  • Ans. 

    Developed a new power distribution system for a large manufacturing plant, resulting in a 20% increase in efficiency.

    • Designed and implemented a new power distribution system for a large manufacturing plant

    • Collaborated with a team of engineers and technicians to ensure successful installation and operation

    • Resulted in a 20% increase in efficiency and significant cost savings for the company

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company. Need to explain in detail
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. Cable laying process
  • Ans. 

    The cable laying process involves planning, trenching, installation, and testing for effective electrical distribution.

    • Planning: Assess the route and determine cable type based on load requirements.

    • Trenching: Excavate the ground to lay cables, ensuring proper depth and width.

    • Installation: Place cables in trenches, using protective conduits if necessary.

    • Backfilling: Cover the cables with soil, ensuring no sharp objects ...

  • Answered by AI
  • Q2. Transformers testing
  • Q3. Oil filtration process

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Working of power transformer
  • Ans. 

    A power transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Power transformers are used to step up or step down voltage levels in electrical power transmission and distribution systems.

    • They consist of a primary winding, a secondary winding, and a magnetic core.

    • When an alternating current flows through the primary winding, it creates a magne...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, answer without hesitate
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. ANY ONE electrical SOLAR WORK
  • Q2. Solar work electrical maintenance

STYLAM Industries Interview FAQs

How many rounds are there in STYLAM Industries Production Engineer interview?
STYLAM Industries interview process usually has 3 rounds. The most common rounds in the STYLAM Industries interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in STYLAM Industries Production Engineer interview?

Some of the top questions asked at the STYLAM Industries Production Engineer interview -

  1. Lows of heat exchan...read more
  2. Measurements calculat...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

J&F Interview Questions
3.7
 • 30 Interviews
Eversendai Interview Questions
3.7
 • 28 Interviews
J K Fenner Interview Questions
3.9
 • 27 Interviews
View all
STYLAM Industries Production Engineer Salary
based on 14 salaries
₹2.1 L/yr - ₹4.8 L/yr
7% less than the average Production Engineer Salary in India
View more details

STYLAM Industries Production Engineer Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

1.0

Skill development

1.0

Work-life balance

1.0

Salary

2.0

Job security

2.0

Company culture

1.0

Promotions

1.0

Work satisfaction

Explore 1 Review and Rating
Area Sales Manager
84 salaries
unlock blur

₹4.5 L/yr - ₹9 L/yr

Regional Sales Manager
36 salaries
unlock blur

₹11 L/yr - ₹14 L/yr

Assistant Manager
27 salaries
unlock blur

₹4.5 L/yr - ₹7.6 L/yr

Senior Sales Executive
23 salaries
unlock blur

₹3.8 L/yr - ₹6 L/yr

Senior Manager
19 salaries
unlock blur

₹4.9 L/yr - ₹15 L/yr

Explore more salaries
Compare STYLAM Industries with

Sterling & Wilson

4.1
Compare

J K Fenner

3.9
Compare

Saudi Binladin Group

4.1
Compare

McNally Bharat Engineering

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview