Upload Button Icon Add office photos

Filter interviews by

Shah Sponge And Power Interview Questions and Answers

Updated 14 Dec 2024

Shah Sponge And Power Interview Experiences

Popular Designations

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company

Round 1 - Technical 

(2 Questions)

  • Q1. Specific consumption of raw materials & cost.
  • Ans. 

    Tracking specific consumption of raw materials and cost is crucial for effective project management and cost control.

    • Regularly monitor and record the quantity of raw materials used in production

    • Calculate the cost of raw materials per unit produced

    • Analyze trends in raw material consumption to identify areas for optimization

    • Implement measures to reduce waste and improve efficiency

    • Utilize software or tools for accurate tr...

  • Answered by AI
  • Q2. Analysis of raw materials & quality
  • Ans. 

    Analyzing raw materials and ensuring quality is crucial for successful project management.

    • Conduct thorough analysis of raw materials to determine quality and suitability for the project

    • Implement quality control measures to ensure consistency and reliability of raw materials

    • Collaborate with suppliers to maintain high standards of raw materials

    • Utilize testing equipment and procedures to assess the quality of raw material...

  • Answered by AI
Round 2 - Technical 

Interview Preparation Tips

Interview preparation tips for other job seekers - To prepared on your job details

General Manager and Project Head Interview Questions asked at other Companies

Q1. Specific consumption of raw materials & cost.
View answer (1)

DCS Engineer Interview Questions & Answers

user image Anonymous

posted on 12 Jun 2023

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is bolier. what is mounting and Acciseries of boiler. Boiler lightup procedure what happens when drum ssfety blow.
  • Ans. 

    A boiler is a closed vessel in which water or other fluid is heated. Mountings and accessories are components attached to the boiler for its proper functioning.

    • Boiler mounting refers to the necessary fittings and devices for the safe operation of a boiler, such as safety valves, water level indicators, pressure gauges, etc.

    • Boiler accessories are additional components that help in improving the efficiency and performanc...

  • Answered by AI
  • Q2. Water analisis coal analisis

DCS Engineer Interview Questions asked at other Companies

Q1. why Ssc is increased when load is reduced As a dcs engineer what should you do if vacuum is decreasing continuesly what are the turbine bearings temperatures running on full load alarms and trippings value
View answer (1)

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. Opeartion related

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview war a technical but was majority a stress test. The two round of interviews about 35 minute the interviewer wanted to test both my knowledge.most the question ask me for my technical knowledge for my experience like my work responsibility, manpower handling raw material handling, chemical and physical analysis of final products and their raw materials uses
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

General discussion about my job

Round 2 - Technical 

(1 Question)

  • Q1. In detail knowledge about my job
Round 3 - Technical 

(1 Question)

  • Q1. Why choose this company

I applied via Recruitment Consulltant

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Conveyor Grades, Hydraulic system it's grade tan value, nas value
  • Ans. How will you asset for this organisation
  • Answered Anonymously
Round 3 - Behavioral 

(1 Question)

  • Q1. What are your achievements, how can you be beneficial for the company.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear and specific about your job role and KPI, mention your achievements, and profits you can given.
Never lie, please be clear if you don't know

I applied via Referral

Round 1 - Group Discussion 

Discussion with, MD, COO, Legal Advisor

Round 2 - One-on-one 

(2 Questions)

  • Q1. In one round discussion I was selected
  • Q2. They wanted to know my experience in Govt. I possessed 38 years is service all over the in various departments

Interview Preparation Tips

Interview preparation tips for other job seekers - Be specific in answering to the questions
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
No response

I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Preffered Location
  • Q2. Salary expectation
Round 2 - Technical 

(3 Questions)

  • Q1. Sheet pile use in damp & flood area
  • Ans. 

    Sheet piles are commonly used in damp and flood-prone areas to provide structural support and prevent water infiltration.

    • Sheet piles are driven into the ground to create a barrier against water seepage.

    • They are often made of steel or vinyl and are interlocked to form a continuous wall.

    • Sheet piles can be used in cofferdams, seawalls, and flood protection systems.

    • They are effective in preventing soil erosion and protecti...

  • Answered by AI
  • Q2. Wind load calculation
  • Q3. Grade of concrete
  • Ans. 

    Grade of concrete refers to the strength of the concrete mix design.

    • Grade of concrete is denoted by the ratio of cement to sand to aggregate.

    • Common grades of concrete include M10, M15, M20, etc.

    • Higher grade concrete has higher strength and durability.

    • For example, M20 concrete has a compressive strength of 20 MPa.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Know about your previous work experience as per mention in cv

I applied via Recruitment Consulltant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Physical and chemical quality of raw materials and sinter product.
  • Ans. 

    Physical and chemical quality of raw materials and sinter product is crucial for ensuring product quality and performance.

    • Raw materials should meet specified physical and chemical requirements to ensure desired sinter product properties.

    • Regular testing and analysis of raw materials and sinter product is necessary to maintain quality standards.

    • Factors such as particle size, composition, moisture content, and impurities ...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Apr 2023.

Round 1 - Group Discussion 

Debate on multiple topics

Round 2 - Technical 

(1 Question)

  • Q1. Questions related to Operation Research
Round 3 - Case Study 

Come out with a conclusion and solutions to a problem

Round 4 - HR 

(1 Question)

  • Q1. About previous experience, challenges and accolades.
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Easy to easy but they will select u even if u don't write anything

Round 2 - One-on-one 

(2 Questions)

  • Q1. What is ur name
  • Ans. 

    My name is John Smith.

    • Full name is John Smith

    • Common name

    • Easy to remember

  • Answered by AI
  • Q2. Does u have pan card and aadhar card
  • Ans. 

    Yes, I have both a PAN card and an Aadhar card.

    • Yes, I have a PAN card which is used for financial transactions and tax purposes.

    • I also have an Aadhar card which is a unique identification number issued by the government of India.

    • Having both cards is essential for various official and financial transactions.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - 🙏dekhlo

Shah Sponge And Power Interview FAQs

How many rounds are there in Shah Sponge And Power interview?
Shah Sponge And Power interview process usually has 2 rounds. The most common rounds in the Shah Sponge And Power interview process are Technical and Resume Shortlist.
What are the top questions asked in Shah Sponge And Power interview?

Some of the top questions asked at the Shah Sponge And Power interview -

  1. what is bolier. what is mounting and Acciseries of boiler. Boiler lightup proce...read more
  2. Specific consumption of raw materials & co...read more
  3. Analysis of raw materials & qual...read more

Tell us how to improve this page.

Shah Sponge And Power Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 857 Interviews
JSW Steel Interview Questions
3.9
 • 592 Interviews
ESL Steel Interview Questions
4.0
 • 31 Interviews
ArcelorMittal Interview Questions
4.1
 • 29 Interviews
Vizag Steel Interview Questions
4.1
 • 28 Interviews
View all

Shah Sponge And Power Reviews and Ratings

based on 17 reviews

3.0/5

Rating in categories

2.7

Skill development

2.5

Work-life balance

2.6

Salary

2.6

Job security

2.6

Company culture

2.2

Promotions

2.6

Work satisfaction

Explore 17 Reviews and Ratings
Shift Incharge
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Accountant
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Boiler DCS Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Shah Sponge And Power with

JSW Steel

3.9
Compare

Tata Steel

4.1
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview