Sanvijay Rolling & Engineering Interview Questions and Answers

Q1. What about Lubrication system & its components?
Ans. 
The lubrication system is responsible for reducing friction between moving parts in an engine by providing oil to various components.
• The main components of a lubrication system include the oil pump, oil filter, oil pan, and oil passages.

• The oil pump is responsible for circulating oil through the engine to lubricate moving parts.

• The oil filter helps remove contaminants from the oil to prevent damage to engine components...read more
Answered by AI
Add your answer
Q2. How do you diagnosis when vehicle came from overheating concern?
Ans. 
Diagnosing vehicle overheating concerns involves checking coolant levels, radiator condition, thermostat, and fan operation.
• Check coolant levels to ensure there is enough fluid to regulate engine temperature

• Inspect radiator for leaks or blockages that may be causing overheating

• Test thermostat to see if it is opening and closing properly

• Verify fan operation to ensure it is cooling the engine effectively
Answered by AI
Add your answer
Q3. What process follow for diagnosis any vehicle?
Ans. 
Diagnosing a vehicle involves a systematic process of identifying and troubleshooting issues.
• Start by gathering information from the driver about any symptoms or issues they have noticed

• Perform a visual inspection of the vehicle to look for obvious signs of damage or wear

• Use diagnostic tools such as OBD scanners to read error codes and identify specific issues

• Test drive the vehicle to observe any unusual behavior or no...read more
Answered by AI
Add your answer

Q1. What is ADAS & it's Levels
Ans. 
ADAS stands for Advanced Driver Assistance Systems. It refers to a set of safety features and technologies designed to assist drivers in the driving process.
• ADAS includes features like adaptive cruise control, lane departure warning, automatic emergency braking, and blind spot monitoring.

• There are different levels of ADAS ranging from Level 0 (no automation) to Level 5 (full automation).

• Each level represents the extent...read more
Answered by AI
Add your answer
Q2. What is differential & Transfer case, 4*4?
Ans. 
Differential & Transfer case are components of a 4*4 system in vehicles, allowing power to be distributed between front and rear wheels for better traction.
• Differential is a gear system that allows wheels to rotate at different speeds, necessary for turning

• Transfer case is a gearbox that distributes power from the transmission to both front and rear axles in a 4*4 vehicle

• 4*4 system provides better traction and stab...read more
Answered by AI
Add your answer
Q3. Aware about Connected car feathers?
Ans. 
Connected car features refer to technology that allows vehicles to communicate with each other and with external systems for improved safety, efficiency, and convenience.
• Real-time traffic updates

• Remote vehicle diagnostics

• Automatic emergency calling (eCall)

• Vehicle-to-vehicle communication

• Integration with smartphones for navigation and entertainment
Answered by AI
Add your answer
Q4. Types of Transmission use in current & pls explain?
Ans. 
Types of transmission include manual, automatic, CVT, DCT, and AMT.
• Manual transmission requires the driver to manually shift gears using a clutch pedal and gear stick.

• Automatic transmission shifts gears automatically without the need for manual input.

• CVT (Continuously Variable Transmission) uses a belt and pulley system to provide seamless gear shifts.

• DCT (Dual Clutch Transmission) uses two separate clutches for faster...read more
Answered by AI
Add your answer
Q5. What about EV & it's Technology?
Ans. 
EV technology refers to electric vehicles and their associated technologies, such as batteries and charging infrastructure.
• EV technology is rapidly advancing, with improvements in battery technology leading to longer range and faster charging times.

• Charging infrastructure is expanding to support the growing number of EVs on the road, including fast chargers and wireless charging options.

• EVs offer environmental benefits...read more
Answered by AI
Add your answer

Q1. Explain what do you understand about Automobile?
Ans. 
Automobile refers to a vehicle designed for transportation, typically with four wheels and powered by an internal combustion engine.
• Automobiles are commonly used for personal transportation, commuting, and delivery of goods.

• They come in various types such as cars, trucks, buses, and motorcycles.

• Automobiles have evolved over time with advancements in technology, safety features, and fuel efficiency.

• Examples of automobil...read more
Answered by AI
Add your answer
Q2. Explain when press the clutch pedal in manual transmission?
Ans. 
Pressing the clutch pedal in a manual transmission disengages the engine from the wheels, allowing for gear changes.
• Press the clutch pedal when shifting gears

• Press the clutch pedal when coming to a stop

• Press the clutch pedal when starting the vehicle

• Press the clutch pedal when reversing

• Press the clutch pedal when the vehicle is stationary
Answered by AI
Add your answer
Q3. Explain auto transmission solenoids ?
Ans. 
Auto transmission solenoids are electrical components that control the flow of transmission fluid to engage different gears in an automatic transmission system.
• Auto transmission solenoids are electromechanical valves that open and close to regulate the flow of transmission fluid.

• They are controlled by the vehicle's computer system to engage different gears based on driving conditions.

• Common types of auto transmission s...read more
Answered by AI
Add your answer

Q1. Proper system in working candidates.
Add your answer
Q2. Management in supported in department
Ans. 
Management is fully supported in the department, providing resources and guidance to ensure success.
• Management provides clear goals and expectations for the team

• Regular check-ins and feedback sessions are conducted to support employee growth

• Resources such as training programs and tools are readily available for employees

• Management encourages open communication and collaboration among team members
Answered by AI
Add your answer

Q1. Payment terms and condition
Add your answer
Q2. How many facilities in company provide
Add your answer

Q1. My working in good culture company.
Add your answer
Q2. I achieve from zero goal in my target
Add your answer

Q1. Good man for handing
Add your answer
Q2. My working in plant maintenance manager work
Add your answer

Q1. What is your introduction
Add your answer
Q2. What do you work privious company
Add your answer

Q1. What is your qualification
Add your answer
Q2. What is your favourite subject
Add your answer

Q1. Transmission Tower Detailing
Add your answer
Q2. Shop Drawing Bil of Meterial Tower Devlop & Re Devlop
Add your answer
Q3. Raice Chimney Drawing
Add your answer
Q4. Stub Template Prop Drawing
Add your answer
Q5. Structural Develop and Redevelop, Marking Erection Drawing , Bolts Nuts Grip Checking and Counting, Bill of Material , Shop Drawing Cad & Dxf and Shop Drawing Checking , Prop Drawing, Raise Chimney Transm...read more
Add your answer

Q1. How to verify car is Major accidental
Ans. 
To verify if a car is major accidental, check for signs of extensive damage and repair work.
• Look for mismatched paint or panels indicating repair work

• Check for signs of frame damage or structural issues

• Inspect for any airbag deployment or replacement

• Review the vehicle history report for any past accidents

• Consult with a professional mechanic or body shop for a thorough inspection
Answered by AI
Add your answer
Q2. How to check apron replace
Ans. 
To check apron replace, inspect for wear and tear, measure thickness, check for cracks or damage, and ensure proper alignment.
• Inspect apron for wear and tear

• Measure thickness of apron material

• Check for cracks or damage on the apron

• Ensure proper alignment of the apron
Answered by AI
Add your answer
Q3. 1 check car piller roboting punching are proper visible aur not than confirm car are accidental aur not ..
Add your answer
Q4. Check apron replace1 point check apron selent are are original and 2 roboting punching than confirm apron replace ya repair..
Add your answer
Q5. Check uppar member lower member radiator support both side legs apron col top head light support than confirm car is Major accidental aur not ..
Add your answer

Q1. Tell me about your self?
Add your answer
Q2. Current salary?
Add your answer

They asked about 60 questions in total with 30 aptitude and 30 technical questions

Q1. The hr and technical round occured at same time there are there people panel with one hr two technical interviewers with for mechanical and electrical questions.
Add your answer
Q2. My first questions is explain about HVAC and vapour compression cycle and they asked about 10 units like unit of heat power etc and they finally asked about current scenerio questions finally interview end...read more
Add your answer
Q3. The interview go on about 30 minutes and the asked me about to draw the pv and ts diagrama of hvac finally the interview is over and got selected for 5lpa. Good luck.
Add your answer

Q1. Job kha pa ha
Add your answer
Q2. Job kha pa ha
Add your answer

Q1. Machine and tachanical
Add your answer
Q2. Machine and tachanical
Add your answer

Q1. Engine and gear
Add your answer
Q2. Engi
Add your answer