i
Sansera Engineering
Filter interviews by
I applied via Referral and was interviewed in Aug 2023. There were 3 interview rounds.
Manpower can be effectively handled by proper planning, communication, delegation, and motivation.
Plan ahead to allocate resources efficiently
Communicate clearly with team members to set expectations
Delegate tasks based on individual strengths and skills
Motivate and reward team members for their hard work
Provide training and development opportunities for growth
I applied via Recruitment Consultant and was interviewed in May 2021. There were 3 interview rounds.
Carbide formation after carburizing can lead to brittleness and reduced strength. Proper heat treatment and tempering can help prevent this issue.
Perform proper heat treatment and tempering to prevent carbide formation
Adjust carburizing parameters to avoid excessive carbon diffusion
Use a different carburizing method, such as gas carburizing instead of pack carburizing
Consider using a different material with better resi...
Reference air is a gas used as a reference point for measuring gas concentrations, while purged air is used to remove contaminants from a system.
Reference air is typically a gas with a known and stable concentration of a particular substance, used as a baseline for comparison with other gases.
Purged air is used to remove contaminants from a system or environment, such as in a laboratory or industrial setting.
Purged air...
Carbide, Ferrite and RA are different types of materials used in engineering.
Carbide is a compound of carbon and a metal, commonly used in cutting tools.
Ferrite is a magnetic iron compound, used in electrical components.
RA stands for 'roughness average' and is a measure of surface roughness.
Carbide and Ferrite are materials, while RA is a measurement.
Each material has unique properties and uses in engineering applicati
Brazing is a metal-joining process in which two or more metal items are joined together by melting and flowing a filler metal into the joint.
Brazing uses a filler metal with a lower melting point than the base metals being joined.
The filler metal is heated to its melting point and then flows into the joint by capillary action.
Brazing is commonly used in HVAC, automotive, and aerospace industries.
Brazing can be done wit...
I applied via Referral and was interviewed before Mar 2022. There were 3 interview rounds.
Sansera Engineering interview questions for designations
Top trending discussions
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
posted on 19 Jan 2021
I appeared for an interview in Jul 2020.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
I applied via Approached by Company and was interviewed in May 2022. There were 4 interview rounds.
posted on 31 Jan 2023
I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.
The end-to-end process for wiring harness involves designing, manufacturing, testing, and installation.
Designing the wiring harness based on the electrical requirements and specifications
Manufacturing the harness using automated machines or manual labor
Testing the harness for electrical continuity, insulation resistance, and other parameters
Installing the harness in the vehicle or equipment
Ensuring proper routing and s...
FAI stands for First Article Inspection, a process to verify the initial production run meets all requirements.
FAI from 1 is the initial inspection of the first article produced in a production run
FAI from 2 is the inspection of the first article produced after changes have been made to the production process
FAI from 3 is the inspection of the first article produced after changes have been made to the design or enginee...
based on 5 interviews
1 Interview rounds
based on 42 reviews
Rating in categories
Engineer
247
salaries
| ₹2 L/yr - ₹6.5 L/yr |
Senior Engineer
239
salaries
| ₹3.5 L/yr - ₹9.2 L/yr |
Quality Inspector
210
salaries
| ₹1.4 L/yr - ₹4.5 L/yr |
Trainee
185
salaries
| ₹1 L/yr - ₹4 L/yr |
Junior Engineer
175
salaries
| ₹1.7 L/yr - ₹4.8 L/yr |
Bosch
Samvardhana Motherson Group
MRF Tyres
Ceat Tyres