Filter interviews by
I applied via Company Website and was interviewed before Dec 2020. There were 3 interview rounds.
Strength of material is the ability of a material to withstand external forces without breaking or deforming.
Strength of material is important in engineering design to ensure safety and reliability of structures and machines.
Factors that affect strength of material include material composition, shape, size, and loading conditions.
Common tests used to determine strength of material include tensile, compression, and bend...
Top trending discussions
General tolerances refer to the acceptable range of variation in dimensions or properties of a part or product.
General tolerances are typically specified in engineering drawings to ensure parts fit and function properly.
They are usually expressed as a range of acceptable values, such as +/- 0.1mm.
Tolerances can vary depending on the specific requirements of the part or product.
Examples of general tolerances include dim...
The material for wheel is typically rubber or plastic, while the material for pin is usually metal such as steel or aluminum.
Wheel material is commonly rubber or plastic for flexibility and durability
Pin material is usually metal like steel or aluminum for strength and stability
Hardware grades are typically classified based on material composition, strength, and corrosion resistance.
Hardware grades are often denoted by a combination of letters and numbers, such as Grade 8.8 or Grade 316.
Higher grade numbers generally indicate a higher tensile strength or corrosion resistance.
Common grades for screws include Grade 2, Grade 5, and Grade 8, with Grade 8 being the strongest.
For nuts and washers, ...
Motor power can be calculated using the formula: Power (W) = Torque (Nm) x Speed (RPM) / 9.548
Calculate the torque required for the application
Determine the speed at which the motor will operate
Use the formula Power (W) = Torque (Nm) x Speed (RPM) / 9.548 to calculate motor power
Welds are critical in design engineering for joining metal components together.
Welds must be strong enough to withstand the intended load and stress.
Proper welding techniques and materials must be used to ensure the integrity of the weld.
Inspections and testing should be conducted to verify the quality of the weld.
Consideration should be given to factors such as joint design, welding process, and material compatibility...
I applied via Campus Placement and was interviewed in Jun 2023. There were 4 interview rounds.
60 marks
30 marks aptitude
30 marks mechanical mainly kinematics
Topic related to life without mobile
I applied via Recruitment Consulltant and was interviewed before Jan 2022. There was 1 interview round.
posted on 21 Aug 2023
I was interviewed before Aug 2022.
Questions related Basic mechanical engineering subject
Strength of materials, machine design, thermal, hydraulic and pneumatic
I applied via Recruitment Consulltant and was interviewed before Jan 2024. There was 1 interview round.
ISO standard number for welding is ISO 9606.
ISO 9606 specifies the qualification testing of welders for fusion welding.
It covers arc welding, gas welding, resistance welding, and brazing processes.
The standard ensures that welders have the necessary skills and knowledge to produce quality welds.
Different types of welding symbols include fillet weld symbols, groove weld symbols, plug and slot weld symbols, and spot weld symbols.
Fillet weld symbols are used to represent a weld that is placed in the corner of two pieces of metal.
Groove weld symbols indicate a weld that fills a groove between two pieces of metal.
Plug and slot weld symbols represent welds that fill a hole or slot in one of the pieces being joined.
...
The minimum thickness required for bending materials depends on the material type, bending method, and equipment used.
Minimum thickness is influenced by material type - softer materials can be bent at thinner thicknesses compared to harder materials.
Bending method plays a role - air bending requires thicker materials compared to bottoming or coining.
Equipment used also affects minimum thickness - higher tonnage machine...
I applied via Naukri.com and was interviewed in Sep 2021. There were 3 interview rounds.
I applied via Recruitment Consulltant and was interviewed before May 2023. There was 1 interview round.
I applied via Referral and was interviewed before Jul 2023. There were 2 interview rounds.
I applied via Recruitment Consulltant and was interviewed in Oct 2022. There were 2 interview rounds.
based on 2 reviews
Rating in categories
Service Engineer
176
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Service Engineer
65
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Service Engineer
44
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
41
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
40
salaries
| ₹0 L/yr - ₹0 L/yr |
Caterpillar Inc
Komatsu
Joy Global
Epiroc