S P Singla Constructions QA QC Mechanical Engineer Interview Questions, Process, and Tips

Q1. What is the types of Compressors?
Ans. 
Types of compressors include reciprocating, rotary, centrifugal, and axial compressors.
• Reciprocating compressors use pistons to compress air or gas.

• Rotary compressors use rotating mechanisms such as screws or vanes.

• Centrifugal compressors use a rotating impeller to create centrifugal force.

• Axial compressors use rotating blades to compress air in a straight line.

• Examples include reciprocating air compressors, rotary scr...read more
Answered by AI
Add your answer
Q2. What are the Procedure to install the Centrifugal axial compressors?.
Ans. 
The procedure to install centrifugal axial compressors involves proper planning, alignment, assembly, and testing.
• Ensure proper foundation is prepared to support the compressor

• Align the compressor with the piping system for proper flow

• Assemble the compressor components according to manufacturer's instructions

• Test the compressor for performance and efficiency before final installation
Answered by AI
Add your answer
Q3. Types of pump and it's classifications?
Ans. 
Types of pumps include centrifugal, positive displacement, and axial flow pumps.
• Centrifugal pumps: use centrifugal force to move fluid through the pump

• Positive displacement pumps: move fluid by trapping a fixed amount and forcing it through the discharge port

• Axial flow pumps: move fluid parallel to the pump shaft
Answered by AI
Add your answer
Q4. Lifting Plan Procedure?
Ans. 
A lifting plan procedure is a detailed plan outlining the steps and precautions to be taken when lifting heavy objects.
• Identify the weight and dimensions of the object to be lifted

• Determine the appropriate lifting equipment needed

• Assess the location and environment for any obstacles or hazards

• Assign roles and responsibilities to team members involved in the lift

• Communicate clearly and follow the plan step by step

• Conduc...read more
Answered by AI
Add your answer
Q5. Pumps Capacity?
Ans. 
Pumps capacity refers to the maximum flow rate a pump can handle.
• Pumps capacity is typically measured in gallons per minute (GPM) or liters per minute (LPM).

• It is important to consider the required flow rate when selecting a pump for a specific application.

• Factors such as pump size, motor power, and system pressure affect the capacity of a pump.

• For example, a centrifugal pump may have a capacity of 500 GPM, while a dia
Answered by AI
Add your answer
Q6. Methods statement of rotating and static equipment.
Ans. 
Methods statement for maintaining rotating and static equipment in mechanical engineering.
• Regular inspection and maintenance schedules for both rotating and static equipment

• Use of proper lubrication for rotating equipment to prevent wear and tear

• Checking alignment and balance of rotating equipment to ensure smooth operation

• Testing and calibrating static equipment for accuracy and efficiency

• Following manufacturer's guid...read more
Answered by AI
Add your answer

Q1. Define SFD ,BMD
Ans. 
SFD stands for Shear Force Diagram and BMD stands for Bending Moment Diagram in structural analysis.
• SFD shows the variation of shear force along the length of a beam or structure.

• BMD shows the variation of bending moment along the length of a beam or structure.

• Both diagrams are essential for analyzing the internal forces in a structure.

• They are commonly used in civil and mechanical engineering for designing and analyzi...read more
Answered by AI
Add your answer
Q2. Calculate Thrust forces for beam
Ans. 
Thrust forces for beams can be calculated using equations of equilibrium and considering external loads.
• Calculate the sum of all external forces acting on the beam.

• Determine the direction of the forces (compression or tension) based on the beam's support conditions.

• Apply equations of equilibrium to calculate the thrust forces at different points along the beam.

• Consider any distributed loads or moments that may affect t...read more
Answered by AI
Add your answer

Q1. Tell me about yourself
Add your answer
Q2. Why you want to leave your current organisation
Add your answer
Q3. Are you comfortable to frequent site changes and travel
Add your answer
Q4. What is your salary expection
Add your answer

About your position.

Q1. About is code use in concrete
Add your answer
Q2. IS 456 2000
Add your answer

Q1. Technical question only sply piping execution
Add your answer
Q2. Welding related electrodes,ID progress,
Add your answer

Q1. What's your job profile?
Add your answer
Q2. Why you want to switch your current job?
Add your answer
Q3. When you will available to join if you selected?
Add your answer
Q4. What's your expected salary?
Add your answer

Q1. Elaborate your job profile.
Add your answer
Q2. What's your exact job role?
Add your answer
Q3. Why maintenance of machineries so important?
Ans. 
Maintenance of machineries is important to ensure their optimal performance and prevent breakdowns.
• Regular maintenance helps to identify and fix small issues before they become major problems.

• It increases the lifespan of the machinery and reduces the need for costly repairs or replacements.

• Proper maintenance also ensures the safety of workers who operate the machinery.

• Examples of maintenance tasks include lubrication, ...read more
Answered by AI
View 1 more answer
Q4. How you keep records of machines?
Ans. 
I maintain a detailed logbook for each machine, including maintenance schedules, repairs, and any upgrades.
• Create a logbook for each machine

• Record maintenance schedules, repairs, and upgrades

• Include dates, details of work done, and any parts replaced

• Regularly update the logbook

• Use digital tools like spreadsheets or specialized software for easier tracking
Answered by AI
Add your answer

Q1. Some technical questions purely related to precast factory production process Repairing methodology
Add your answer