10+ The Employer’s Employer Interview Questions and Answers

Sample interview questions for Site Engineer position

• BBS calculation of slab involves calculating the number of steel bars required for the slab based on the design specifications

• Staircase riser and tread dimensions are determined based on the height of the floor and the desired slope of the staircase

• Types of cement include Ordinary Portland Cement, Rapid Hardening Cement, and Sulphate Resisting Cement

• Full form of TMT is Thermo-Mechanically Treated, PCC is Plain Cement Concre...read more

To find out the square length to skew length of a culvert, you can use trigonometry and geometry principles.

• Use the Pythagorean theorem to find the square length of the culvert

• Measure the skew length of the culvert using a measuring tape or surveying equipment

• Divide the square length by the skew length to obtain the ratio

Drainage contraction knowledge is essential for a Site Engineer to ensure proper water flow and prevent flooding.

• Understanding of drainage systems and their components

• Knowledge of local regulations and standards for drainage design

• Ability to calculate drainage capacity and slope requirements

• Experience in designing and implementing drainage solutions

• Familiarity with different types of drainage materials and their properties

Various types of structures are handled in road projects, including bridges, tunnels, culverts, and retaining walls.

• Bridges: Overpasses, flyovers, and interchanges are common structures in road projects.

• Tunnels: Road tunnels are constructed to pass through mountains or under bodies of water.

• Culverts: These structures allow water to flow under the road, preventing flooding.

• Retaining walls: Used to support soil and prevent erosion along the road.

• Other structures: Pedestrian bri...read more

The question is unclear and does not make sense.

• The question seems to be asking about how to negotiate a higher salary with a previous company.

• It is important to research industry standards and salary ranges for the position.

• Highlighting relevant experience, skills, and achievements can help justify a higher salary.

• Negotiating with confidence and being prepared to provide reasons for the requested salary increase is crucial.

• Examples of achievements or projects that have added...read more

Design mix concrete is prepared as per the mix design provided by a structural engineer, while standard mix concrete follows a standard ratio of ingredients.

• Design mix concrete is customized based on specific project requirements and strength criteria.

• Standard mix concrete follows a fixed ratio of cement, sand, and aggregates, such as 1:2:4.

• Design mix concrete may require testing and adjustments to achieve desired properties.

• Standard mix concrete is commonly used for general ...read more

Steel unit weight varies with diameter.

• The unit weight of steel varies with the diameter of the steel.

• The weight of steel can be calculated using the formula: weight = volume x density.

• The density of steel is approximately 7850 kg/m³.

• The weight of a steel rod with a diameter of 10mm and a length of 1 meter is approximately 0.785 kg.

• The weight of a steel rod with a diameter of 20mm and a length of 1 meter is approximately 3.14 kg.

Brick sizes vary and cement brands are numerous in the market.

• Brick sizes commonly range from 8 to 12 inches in length and 4 to 6 inches in width.

• Cement brands available in the market include Ultratech, ACC, Ambuja, and JK Cement.

• The size of bricks and the type of cement used depend on the specific requirements of the project.

• The strength and durability of the structure also play a role in determining the size of bricks and type of cement to be used.

SD stands for Standard Deviation.

• SD is a measure of the amount of variation or dispersion of a set of values.

• It is calculated as the square root of the variance.

• It is commonly used in statistics and probability theory.

• For example, if the SD of a test score is 10, it means that most scores are within 10 points of the average score.

• A low SD indicates that the data points are close to the mean, while a high SD indicates that the data points are spread out.

Cement types and grades depend on their composition and usage.

• Cement types include Portland cement, white cement, and blended cement.

• Grades are determined by strength and setting time.

• Portland cement has five grades: 33, 43, 53, 63, and 73.

• Blended cement is a mixture of Portland cement and other materials like fly ash or slag.

• White cement is used for decorative purposes.

• The choice of cement type and grade depends on the project requirements.

Calculating BBS for columns involves determining the quantity and spacing of reinforcement bars.

• Calculate the total length of reinforcement bars required for the column

• Determine the spacing between the bars based on design requirements

• Consider the diameter and spacing of the bars to ensure proper structural integrity

• Use software or manual calculations to determine the BBS accurately

Mix ratios of concrete refer to the proportions of cement, sand, and aggregate used in a concrete mix.

• Mix ratios are typically expressed as a series of numbers representing the amount of each ingredient in the mix.

• For example, a common mix ratio for concrete is 1:2:4, which means 1 part cement, 2 parts sand, and 4 parts aggregate.

• The mix ratio can vary depending on the strength and durability requirements of the concrete being used.

• It is important to follow the correct mix ra...read more

MSL stands for Mean Sea Level.

• MSL is the average height of the sea surface measured over a period of time.

• It is used as a reference point for measuring elevations and depths.

• It is important in civil engineering for designing structures near water bodies.

• For example, the height of a bridge or a dam is measured from MSL.

• MSL can vary due to factors such as tides, currents, and weather conditions.

The weight of steel depends on its volume and density. Mix ratio varies depending on the type of steel.

• The weight of steel can be calculated using the formula: weight = volume x density

• The density of steel varies depending on the type of steel, but is typically around 7.85 g/cm³

• Mix ratio refers to the proportion of different elements in the steel, such as carbon, manganese, and silicon

• Different types of steel have different mix ratios, which affect their properties and intend...read more