Add office photos
Filter interviews by
Ritikaa Enterprises Design Engineer Interview Questions and Answers
Updated
12 Nov 2024
1 interview found
Sort by:
Popular
Anonymous
Interview experience
Excellent
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Selected
I applied via Approached by Company and was interviewed before Nov 2023.
1 Interview Round
1
One-on-one Round (3 Questions)
- Q1. Technical Knowledge Add Answer
- Q2. Material knowledge Add Answer
- Q3. Structural knowledge Add Answer
Interview questions from similar companies
I applied via Recruitment Consulltant and was interviewed in May 2021.
4 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
2
Technical Round (1 Question)
- Q1. Product knowledge such as DIS, Circuit Integration, Process of Complete Design Cycle. Add Answer
3
Technical Round (1 Question)
- Q1. Same sort of questions with some problems to be solved based on power supply sections, current and voltage calculation etc. Add Answer
4
HR Round (1 Question)
- Q1. Relocation, Salary Negotiation Add Answer
Interview Preparation Tips
Interview preparation tips for other job seekers - Be technically sound and keep upgrading with the technology. Don't forget your basics and keep on learning. This will be enough to crack any interview.
Interview experience
Good
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Selected
I applied via Campus Placement and was interviewed before Mar 2022.
2 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
2
One-on-one Round (2 Questions)
- Q1. Manufacturing Processes, Milling operations, Single pint cutting tool, Multi Point Cutting tool, Plastic Processing, Snaps, Fits assembly, Solidworks command. Add Answer
- Q2. Types of Plastics and Plastic injection molding, Molds parts, Ejectors, Parting lines, Sink marks and other defects. View Answers (1)
Interview Preparation Tips
Interview preparation tips for other job seekers - Be prepared for plastic products, curves of product and mold parts.
I applied via Walk-in and was interviewed before Sep 2021.
3 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
2
Technical Round (2 Questions)
- Q1. Part modelling
Sheetmetal
Detailing Add Answer
- Q2. Why do you want to join our company View Answers (1)
3
One-on-one Round (1 Question)
- Q1. How long will you stay here? View Answers (1)
Interview Preparation Tips
Interview preparation tips for other job seekers - Very easy to crack the interview. Be calm and genuine
4 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: Ist round was writtn round, no neg marking (easy but be accurate),
total questions-90 (divided into 3 section) ,time alloted-90 min.
3 sections r as follows:-
sec A - 30 ques, technical(subjects including EDC,AIC,DLD,basic BEE)
sec B- 15 GK+15 quant(RS agrwal is more than enough )
sec C- 30 ques, bacis C and C++ (very easy)
they will judge u section wise
Tips: Most IMPORTANT part of placement is WRITTEN round, we were around 60-70 students in total and out of which only 7 were selected for further rounds
i suggest u all to prepare very well for this round and try to b very accurate,
solve RS agrawal or arun sharma(level 1 and solved question only) for quantitative aptitude, and for C questions solve from online site INDIABIX , you will find all questions are come from here only
Duration: 90 minutes
Total Questions: 90
Round: Technical Interview
Experience: Next is PI technical and questions asked to me :-
1)Tell me about urself(do include brief intro about your internship if u have done any otherwise no problem)
2)About my internship
suddenly he started asked question from C-
3)what is BIT FIELD?, MACROS? ,PREPROCESSOR? ,EXTERN?
4)Diff btw char array and int array?
then he switched to embedded system-
5)What are INTERRUPT?, EEPROM? , BAUD RATE?
6)About my Projects(i suggest u to all tell project related to embedded only)
7)FAV subject and question from it (do prepare atleast 2 subjects very well)
8)What is electronics, Telecommunication?
9)diff btw ETNT AND ECE?
then he asked some HR questions too:-
10)what is your STRENGTH AND WEAKNESS(support your answer with example)
11)where do u see urslf 5 yr from now?
12) hobby?
13) low pointer?
then he asked me to ask question:
i have asked 2 question:
14)who is your biggest competitor?
15)what is the hierarchy of this job post?
Tips: 1ST TECHNICAL
They will focus on 2 things only :
1)C(most imp) : even it is a core elex company but they will not going to take you if you dont know C,
must learn dis topics viz ARRAY, POINTER, STRUCTURE, 4 storage class,from yashwant kanetkar and solve question from INDIABIX
2) PROJECTS: Projects on EMBEDDED SYSTEMS only, as many projects as u have greater is the chance of your selection and try to explain it in detail as much as u can.
Round: HR Interview
Experience: its just a formality round if they called you for this round that means u r selected ,they just wanted to know if u r really interested for this job? and u willing to join there company or not..
Skill Tips: 2 kind of people can crack interviews in core companies,1 having good POINTERS , projects,good technical knowledgesecond having low pointer but MANY PROJECTS+GOOD TECHNICAL KNOWLEDGE +CONFIDENCENo doubt i lie on second criteria. After 6th sem my CPI was 7.61 only , therefore i already knew that its gonna be tuff for me to be selected in core company but i have done 10+ projects in EMBEDDED SYSTEMS and INTERNSHIP too, so i found it not a big deal for me,always remember CONFIDENCE is the key..best of luck \m/
College Name: NIT RAIPUR
Experience: Ist round was writtn round, no neg marking (easy but be accurate),
total questions-90 (divided into 3 section) ,time alloted-90 min.
3 sections r as follows:-
sec A - 30 ques, technical(subjects including EDC,AIC,DLD,basic BEE)
sec B- 15 GK+15 quant(RS agrwal is more than enough )
sec C- 30 ques, bacis C and C++ (very easy)
they will judge u section wise
Tips: Most IMPORTANT part of placement is WRITTEN round, we were around 60-70 students in total and out of which only 7 were selected for further rounds
i suggest u all to prepare very well for this round and try to b very accurate,
solve RS agrawal or arun sharma(level 1 and solved question only) for quantitative aptitude, and for C questions solve from online site INDIABIX , you will find all questions are come from here only
Duration: 90 minutes
Total Questions: 90
Round: Technical Interview
Experience: Next is PI technical and questions asked to me :-
1)Tell me about urself(do include brief intro about your internship if u have done any otherwise no problem)
2)About my internship
suddenly he started asked question from C-
3)what is BIT FIELD?, MACROS? ,PREPROCESSOR? ,EXTERN?
4)Diff btw char array and int array?
then he switched to embedded system-
5)What are INTERRUPT?, EEPROM? , BAUD RATE?
6)About my Projects(i suggest u to all tell project related to embedded only)
7)FAV subject and question from it (do prepare atleast 2 subjects very well)
8)What is electronics, Telecommunication?
9)diff btw ETNT AND ECE?
then he asked some HR questions too:-
10)what is your STRENGTH AND WEAKNESS(support your answer with example)
11)where do u see urslf 5 yr from now?
12) hobby?
13) low pointer?
then he asked me to ask question:
i have asked 2 question:
14)who is your biggest competitor?
15)what is the hierarchy of this job post?
Tips: 1ST TECHNICAL
They will focus on 2 things only :
1)C(most imp) : even it is a core elex company but they will not going to take you if you dont know C,
must learn dis topics viz ARRAY, POINTER, STRUCTURE, 4 storage class,from yashwant kanetkar and solve question from INDIABIX
2) PROJECTS: Projects on EMBEDDED SYSTEMS only, as many projects as u have greater is the chance of your selection and try to explain it in detail as much as u can.
Round: HR Interview
Experience: its just a formality round if they called you for this round that means u r selected ,they just wanted to know if u r really interested for this job? and u willing to join there company or not..
Skill Tips: 2 kind of people can crack interviews in core companies,1 having good POINTERS , projects,good technical knowledgesecond having low pointer but MANY PROJECTS+GOOD TECHNICAL KNOWLEDGE +CONFIDENCENo doubt i lie on second criteria. After 6th sem my CPI was 7.61 only , therefore i already knew that its gonna be tuff for me to be selected in core company but i have done 10+ projects in EMBEDDED SYSTEMS and INTERNSHIP too, so i found it not a big deal for me,always remember CONFIDENCE is the key..best of luck \m/
College Name: NIT RAIPUR
I applied via Recruitment Consulltant and was interviewed in May 2021.
4 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
2
Technical Round (1 Question)
- Q1. Product knowledge such as DIS, Circuit Integration, Process of Complete Design Cycle. Add Answer
3
Technical Round (1 Question)
- Q1. Same sort of questions with some problems to be solved based on power supply sections, current and voltage calculation etc. Add Answer
4
HR Round (1 Question)
- Q1. Relocation, Salary Negotiation Add Answer
Interview Preparation Tips
Interview preparation tips for other job seekers - Be technically sound and keep upgrading with the technology. Don't forget your basics and keep on learning. This will be enough to crack any interview.
Interview experience
Good
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Selected
I applied via Campus Placement and was interviewed before Mar 2022.
2 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
2
One-on-one Round (2 Questions)
- Q1. Manufacturing Processes, Milling operations, Single pint cutting tool, Multi Point Cutting tool, Plastic Processing, Snaps, Fits assembly, Solidworks command. Add Answer
- Q2. Types of Plastics and Plastic injection molding, Molds parts, Ejectors, Parting lines, Sink marks and other defects. View Answers (1)
Interview Preparation Tips
Interview preparation tips for other job seekers - Be prepared for plastic products, curves of product and mold parts.
I applied via Job Portal and was interviewed in May 2021.
1 Interview Round
Interview Questions
- Q1. What are the different duties of contactor
View Answers (1)
- Q2. Different types of RTD And what is the meaning of PT100
View Answers (2)
Interview Preparation Tips
Interview preparation tips for other job seekers - Please prepare all the component selection of your control circuit
I applied via Walk-in and was interviewed before Sep 2021.
3 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
2
Technical Round (2 Questions)
- Q1. Part modelling
Sheetmetal
Detailing Add Answer
- Q2. Why do you want to join our company View Answers (1)
3
One-on-one Round (1 Question)
- Q1. How long will you stay here? View Answers (1)
Interview Preparation Tips
Interview preparation tips for other job seekers - Very easy to crack the interview. Be calm and genuine
4 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: Ist round was writtn round, no neg marking (easy but be accurate),
total questions-90 (divided into 3 section) ,time alloted-90 min.
3 sections r as follows:-
sec A - 30 ques, technical(subjects including EDC,AIC,DLD,basic BEE)
sec B- 15 GK+15 quant(RS agrwal is more than enough )
sec C- 30 ques, bacis C and C++ (very easy)
they will judge u section wise
Tips: Most IMPORTANT part of placement is WRITTEN round, we were around 60-70 students in total and out of which only 7 were selected for further rounds
i suggest u all to prepare very well for this round and try to b very accurate,
solve RS agrawal or arun sharma(level 1 and solved question only) for quantitative aptitude, and for C questions solve from online site INDIABIX , you will find all questions are come from here only
Duration: 90 minutes
Total Questions: 90
Round: Technical Interview
Experience: Next is PI technical and questions asked to me :-
1)Tell me about urself(do include brief intro about your internship if u have done any otherwise no problem)
2)About my internship
suddenly he started asked question from C-
3)what is BIT FIELD?, MACROS? ,PREPROCESSOR? ,EXTERN?
4)Diff btw char array and int array?
then he switched to embedded system-
5)What are INTERRUPT?, EEPROM? , BAUD RATE?
6)About my Projects(i suggest u to all tell project related to embedded only)
7)FAV subject and question from it (do prepare atleast 2 subjects very well)
8)What is electronics, Telecommunication?
9)diff btw ETNT AND ECE?
then he asked some HR questions too:-
10)what is your STRENGTH AND WEAKNESS(support your answer with example)
11)where do u see urslf 5 yr from now?
12) hobby?
13) low pointer?
then he asked me to ask question:
i have asked 2 question:
14)who is your biggest competitor?
15)what is the hierarchy of this job post?
Tips: 1ST TECHNICAL
They will focus on 2 things only :
1)C(most imp) : even it is a core elex company but they will not going to take you if you dont know C,
must learn dis topics viz ARRAY, POINTER, STRUCTURE, 4 storage class,from yashwant kanetkar and solve question from INDIABIX
2) PROJECTS: Projects on EMBEDDED SYSTEMS only, as many projects as u have greater is the chance of your selection and try to explain it in detail as much as u can.
Round: HR Interview
Experience: its just a formality round if they called you for this round that means u r selected ,they just wanted to know if u r really interested for this job? and u willing to join there company or not..
Skill Tips: 2 kind of people can crack interviews in core companies,1 having good POINTERS , projects,good technical knowledgesecond having low pointer but MANY PROJECTS+GOOD TECHNICAL KNOWLEDGE +CONFIDENCENo doubt i lie on second criteria. After 6th sem my CPI was 7.61 only , therefore i already knew that its gonna be tuff for me to be selected in core company but i have done 10+ projects in EMBEDDED SYSTEMS and INTERNSHIP too, so i found it not a big deal for me,always remember CONFIDENCE is the key..best of luck \m/
College Name: NIT RAIPUR
Experience: Ist round was writtn round, no neg marking (easy but be accurate),
total questions-90 (divided into 3 section) ,time alloted-90 min.
3 sections r as follows:-
sec A - 30 ques, technical(subjects including EDC,AIC,DLD,basic BEE)
sec B- 15 GK+15 quant(RS agrwal is more than enough )
sec C- 30 ques, bacis C and C++ (very easy)
they will judge u section wise
Tips: Most IMPORTANT part of placement is WRITTEN round, we were around 60-70 students in total and out of which only 7 were selected for further rounds
i suggest u all to prepare very well for this round and try to b very accurate,
solve RS agrawal or arun sharma(level 1 and solved question only) for quantitative aptitude, and for C questions solve from online site INDIABIX , you will find all questions are come from here only
Duration: 90 minutes
Total Questions: 90
Round: Technical Interview
Experience: Next is PI technical and questions asked to me :-
1)Tell me about urself(do include brief intro about your internship if u have done any otherwise no problem)
2)About my internship
suddenly he started asked question from C-
3)what is BIT FIELD?, MACROS? ,PREPROCESSOR? ,EXTERN?
4)Diff btw char array and int array?
then he switched to embedded system-
5)What are INTERRUPT?, EEPROM? , BAUD RATE?
6)About my Projects(i suggest u to all tell project related to embedded only)
7)FAV subject and question from it (do prepare atleast 2 subjects very well)
8)What is electronics, Telecommunication?
9)diff btw ETNT AND ECE?
then he asked some HR questions too:-
10)what is your STRENGTH AND WEAKNESS(support your answer with example)
11)where do u see urslf 5 yr from now?
12) hobby?
13) low pointer?
then he asked me to ask question:
i have asked 2 question:
14)who is your biggest competitor?
15)what is the hierarchy of this job post?
Tips: 1ST TECHNICAL
They will focus on 2 things only :
1)C(most imp) : even it is a core elex company but they will not going to take you if you dont know C,
must learn dis topics viz ARRAY, POINTER, STRUCTURE, 4 storage class,from yashwant kanetkar and solve question from INDIABIX
2) PROJECTS: Projects on EMBEDDED SYSTEMS only, as many projects as u have greater is the chance of your selection and try to explain it in detail as much as u can.
Round: HR Interview
Experience: its just a formality round if they called you for this round that means u r selected ,they just wanted to know if u r really interested for this job? and u willing to join there company or not..
Skill Tips: 2 kind of people can crack interviews in core companies,1 having good POINTERS , projects,good technical knowledgesecond having low pointer but MANY PROJECTS+GOOD TECHNICAL KNOWLEDGE +CONFIDENCENo doubt i lie on second criteria. After 6th sem my CPI was 7.61 only , therefore i already knew that its gonna be tuff for me to be selected in core company but i have done 10+ projects in EMBEDDED SYSTEMS and INTERNSHIP too, so i found it not a big deal for me,always remember CONFIDENCE is the key..best of luck \m/
College Name: NIT RAIPUR
Ritikaa Enterprises Interview FAQs
How many rounds are there in Ritikaa Enterprises Design Engineer interview?
Ritikaa Enterprises interview process usually has 1 rounds. The most common rounds in the Ritikaa Enterprises interview process are One-on-one Round.
Tell us how to improve this page.
Interview Questions for Popular Designations
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
33%
less
than the average Design Engineer Salary in India
View more details
|
Executive Accountant
5
salaries
|  ₹2.4 L/yr - ₹3.7 L/yr |
|
Design Engineer
4
salaries
| ₹3 L/yr - ₹4 L/yr |
|
Project Manager
4
salaries
| ₹3.7 L/yr - ₹4.2 L/yr |
|
Supervisor
4
salaries
| ₹2 L/yr - ₹2 L/yr |
|
Assistant Manager
3
salaries
| ₹4.3 L/yr - ₹7.2 L/yr |
Explore more salaries
Compare Ritikaa Enterprises with
Recipharm Pharmaservices
Compare
Toyo INK
Compare
Karam Industries
Compare
Super Auto India
Compare
Calculate your in-hand salary
Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and
get your in-hand salary
Did you find this page helpful?
Yes No
- Home >
- Interviews >
- Ritikaa Enterprises Interview Questions >
- Ritikaa Enterprises Design Engineer Interview Questions
Share an Interview