Upload Button Icon Add office photos

Filter interviews by

Rajapushpa Properties QS Engineer Interview Questions and Answers

Updated 9 Mar 2024

Rajapushpa Properties QS Engineer Interview Experiences

1 interview found

QS Engineer Interview Questions & Answers

user image Anonymous

posted on 4 Dec 2023

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Plaster Deductions as Per IS Code
  • Ans. 

    Plaster deductions as per IS code refer to the allowable deductions in plaster thickness for different types of surfaces.

    • Plaster deductions are specified in IS 456:2000 for different types of surfaces like brickwork, concrete, etc.

    • For brickwork, the deduction is 12 mm, for concrete it is 6 mm, and for metal it is 3 mm.

    • These deductions are important to ensure proper bonding and strength of the plaster.

    • Following IS code ...

  • Answered by AI
  • Q2. Upto 0.5 Sqm - No Deduction 0.5 to 3 Sqm - One Side Deduction Above 3 Sqm - Full Deduction to be done & Door Jamb to be measured seperately
  • Ans. 

    The deduction criteria for different sizes of door openings are specified, with special instructions for door jambs above 3 Sqm.

    • No deduction for openings up to 0.5 Sqm

    • One side deduction for openings between 0.5 and 3 Sqm

    • Full deduction for openings above 3 Sqm, with separate measurement for door jamb

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. Strengths & Weak ss
Round 4 - HR 

(1 Question)

  • Q1. Package Discussion

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Building construction ,Rcc works,quality measures at site etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Always speak confidently ,donot be nervous.

Well skill in professional knowledge
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Discraib and draw slab section
  • Q2. Draw scetion and elevation bath room
  • Ans. 

    Section and elevation drawings of a bathroom

    • Include dimensions for all fixtures and fittings

    • Show the placement of plumbing lines and electrical outlets

    • Label materials and finishes for walls, floors, and fixtures

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Tell mi about us
  • Ans. 

    A leading engineering company specializing in innovative solutions for various industries.

    • Provides cutting-edge engineering solutions

    • Works with a wide range of industries such as automotive, aerospace, and technology

    • Focuses on research and development to stay ahead of the competition

  • Answered by AI
  • Q2. Last company review
  • Ans. 

    Received positive feedback on technical skills and leadership abilities.

    • Received commendation for successfully leading a team in completing a major project ahead of schedule

    • Recognized for consistently providing innovative solutions to complex technical challenges

    • Received high ratings for communication skills and ability to collaborate effectively with cross-functional teams

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Reasons for leaving previous company
  • Ans. 

    Seeking new challenges and growth opportunities.

    • Desire for career advancement

    • Looking for new challenges

    • Seeking better work-life balance

    • Company restructuring or downsizing

    • Relocation to a new area

  • Answered by AI
  • Q2. Communication test
Round 2 - Technical 

(2 Questions)

  • Q1. Strong question about technical coeficients
  • Q2. Rate analysis and quantity takeoff test

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare and get job

Interview Questionnaire 

2 Questions

  • Q1. Execution of Steel and Shuttering
  • Ans. 

    Execution of steel and shuttering involves the proper planning, design, and installation of these materials for construction projects.

    • Steel reinforcement bars must be placed in the correct location and spacing to ensure structural integrity.

    • Shuttering must be properly designed and installed to create the desired shape and size of concrete structures.

    • Both steel and shuttering must be inspected regularly to ensure they a...

  • Answered by AI
  • Q2. Concrete Mix Design
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. Internal plaster thickness and ratio?
  • Ans. 

    Internal plaster thickness and ratio are important factors in construction projects.

    • The standard thickness of internal plaster is usually 12mm for walls and 15mm for ceilings.

    • The ratio of internal plaster is typically 1:6 (1 part cement to 6 parts sand).

    • The thickness and ratio may vary depending on the specific requirements of the project and the type of surface being plastered.

  • Answered by AI
  • Q2. Process of slab checking?
  • Ans. 

    Slab checking involves verifying the structural integrity and load-bearing capacity of concrete slabs.

    • Check for proper reinforcement placement and spacing

    • Verify concrete mix design and curing process

    • Inspect for any cracks or defects

    • Ensure slab thickness meets design specifications

    • Perform load testing if necessary

  • Answered by AI
  • Q3. External Plaster thickness and ratio?
  • Ans. 

    External plaster thickness and ratio are determined based on the type of surface and desired finish.

    • External plaster thickness typically ranges from 12mm to 20mm depending on the surface condition.

    • The ratio of external plaster mix is usually 1:4 (cement:sand) for rough surfaces and 1:6 for smooth finishes.

    • For better adhesion, a bonding agent may be added to the plaster mix.

    • Proper curing is essential to ensure the stren

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I will try my best technical knowledge provide for your company...

Interview Questionnaire 

1 Question

  • Q1. Technical

I applied via Referral and was interviewed in Jan 2021. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Civil structural, finishing and mep. These subjects have to be known.

Interview Preparation Tips

Interview preparation tips for other job seekers - Not only civil any specialization, you have to know civil structural, finishing in details, electrical, plumbing, land scaping all things. Have Knowledge everything.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Execution process
  • Q2. Building rules and laws

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare yourself
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(4 Questions)

  • Q1. Just Try to answer honestly
  • Q2. Stay Confident Happy
  • Q3. Draw RCC Structure
  • Ans. 

    RCC structure is a reinforced concrete structure commonly used in construction.

    • RCC structures consist of concrete reinforced with steel bars for added strength

    • Common types of RCC structures include beams, columns, slabs, and walls

    • RCC structures are designed to withstand heavy loads and provide durability

    • Proper reinforcement detailing is crucial for the structural integrity of RCC structures

  • Answered by AI
  • Q4. Tell About MEP drawing
  • Ans. 

    MEP drawings are detailed plans that show the mechanical, electrical, and plumbing systems of a building.

    • MEP drawings include layouts for HVAC systems, electrical wiring, plumbing fixtures, and fire protection systems.

    • They are essential for coordinating the installation of these systems during construction.

    • MEP drawings also indicate the location of equipment, materials, and connections needed for the systems to functio...

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. Draw a section of Plumbing
  • Ans. 

    A section of plumbing typically includes pipes, fittings, and fixtures for water supply and drainage systems.

    • Include pipes for both water supply and drainage systems

    • Show fittings such as elbows, tees, and couplings

    • Include fixtures like sinks, toilets, and showers

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Improving your basic knowledge

Rajapushpa Properties Interview FAQs

How many rounds are there in Rajapushpa Properties QS Engineer interview?
Rajapushpa Properties interview process usually has 4 rounds. The most common rounds in the Rajapushpa Properties interview process are Resume Shortlist, Technical and One-on-one Round.
How to prepare for Rajapushpa Properties QS Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Rajapushpa Properties. The most common topics and skills that interviewers at Rajapushpa Properties expect are Billing, Cash Flow, Cost Estimation, ERP System and Project Scheduling.
What are the top questions asked in Rajapushpa Properties QS Engineer interview?

Some of the top questions asked at the Rajapushpa Properties QS Engineer interview -

  1. Upto 0.5 Sqm - No Deduction 0.5 to 3 Sqm - One Side Deduction Above 3 Sqm - Ful...read more
  2. Plaster Deductions as Per IS C...read more
  3. Strengths & Weak...read more

Tell us how to improve this page.

Rajapushpa Properties QS Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

DRA Homes Interview Questions
4.6
 • 23 Interviews
N.K. Realtors Interview Questions
4.2
 • 19 Interviews
JP Infra Interview Questions
3.8
 • 19 Interviews
DTC Projects Interview Questions
4.0
 • 17 Interviews
PS Group Interview Questions
3.8
 • 16 Interviews
Bullmen Realty Interview Questions
3.0
 • 14 Interviews
Kunal Structure Interview Questions
3.7
 • 11 Interviews
View all
Rajapushpa Properties QS Engineer Salary
based on 9 salaries
₹4.2 L/yr - ₹6.6 L/yr
18% more than the average QS Engineer Salary in India
View more details

Rajapushpa Properties QS Engineer Reviews and Ratings

based on 2 reviews

4.0/5

Rating in categories

2.4

Skill development

4.2

Work-life balance

2.8

Salary

3.4

Job security

3.0

Company culture

2.4

Promotions

3.4

Work satisfaction

Explore 2 Reviews and Ratings
Engineer
24 salaries
unlock blur

₹5 L/yr - ₹7 L/yr

Junior Engineer
22 salaries
unlock blur

₹2.5 L/yr - ₹4.1 L/yr

Assistant Manager
17 salaries
unlock blur

₹4.5 L/yr - ₹10 L/yr

Assistant Engineer
16 salaries
unlock blur

₹2.9 L/yr - ₹5 L/yr

Civil Site Engineer
16 salaries
unlock blur

₹2.2 L/yr - ₹5.8 L/yr

Explore more salaries
Compare Rajapushpa Properties with

Realty Assistant

3.8
Compare

Kunal Structure

3.7
Compare

Omkar Realtors and Developers Group

3.7
Compare

HM Group

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview