Filter interviews by
I was interviewed in Apr 2021.
Round duration - 40 Minutes
Round difficulty - Easy
The round began at about 3:30 pm. The environment was good and the interviewer was very calm and humble. At the beginning he asked me some general questions so as the make me comfortable, like tell me about yourself and what you did today. After that he came upon my project and about 80% of the interviews discussion was around my project.
Given a positive integer N
, your task is to return all the prime numbers less than or equal to N
.
1) A prime number is a number that has only two factors:...
Return all prime numbers less than or equal to a given positive integer N.
Iterate from 2 to N and check if each number is prime using a helper function.
A number is prime if it is not divisible by any number from 2 to its square root.
Store and return the prime numbers found in an array in increasing order.
Your task is to implement a queue using two stacks. You are provided with ‘Q’ queries and need to handle them, where each query falls under one of these two operations:
...Implement a queue using two stacks with enqueue and dequeue operations.
Use two stacks to simulate a queue - one for enqueue and one for dequeue.
For enqueue operation, push elements onto the enqueue stack.
For dequeue operation, if the dequeue stack is empty, pop all elements from enqueue stack and push onto dequeue stack.
Return true for successful enqueue and the dequeued element for successful dequeue.
Your task is to determine if two given strings are anagrams of each other. Two strings are considered anagrams if you can rearrange the letters of one string to form the...
Determine if two strings are anagrams of each other by checking if they have the same characters in different order.
Create character frequency maps for both strings and compare them.
Sort both strings and compare if they are equal.
Use a hash table to store character counts and check if they are the same for both strings.
Tip 1 : Do not rush into things. Learning takes time. Focus should be on the concepts and not just on leaving topics half-prepared. Devote 70% of both time and effort to DSA. I solved a total of around 500 questions on sites like GFG and Leetcode. Do not repeat similar questions just to increase the count of the number of questions
Tip 2 : Competitive Programming is a bonus and not a necessity, rather focus on core DSA based problems before trying CP. Do not pursue CP if you do not like it. Devote that extra time to core CS subjects and aptitude preparation.
Tip 3 : Projects play an important role too, do no ignore them. Try to get your hands dirty with a little bit of every field i.e., frontend, backend, and database.
Tip 1 : Try to make a single-page resume. Highlight skills, projects, and work experience more than CGPA. Ensure proper spacing and font to maintain professionalism.
Tip 2 : Does not lie on a resume. Everything written on your resume must be known by you in and out.
Top trending discussions
I applied via Company Website and was interviewed before Dec 2020. There were 4 interview rounds.
I was interviewed before Sep 2020.
Round duration - 60 minutes
Round difficulty - Easy
Round duration - 50 minutes
Round difficulty - Easy
Round duration - 60 minutes
Round difficulty - Easy
At the beginning of this round, the interviewer asked me about the data structures I knew. Linked lists, trees, graphs, arrays etc. was my answer. He asked me how well I knew Dynamic Programming. I said I wasn’t strong in that and he said that he would ask me a question on dynamic programming for sure.
Round duration - 40 minutes
Round difficulty - Easy
The interviewer asked me if I was comfortable with the interview process so far and how the previous interviews were. I said it was good and he gave me the first problem to solve.
Round duration - 60 minutes
Round difficulty - Easy
The interviewer asked me some Computer Science fundamentals in this round as well as some behavioural questions.
Implement a Trie data structure with insert and search functions.
Create a TrieNode class with children and isEndOfWord attributes.
Implement insert function to add words by iterating through characters.
Implement search function to check if a word exists by traversing the Trie.
Example: Insert 'apple', 'banana', 'orange' and search for 'apple' and 'grape'.
Do lot of hard work and practice of Data Structures and Algorithms based questions. I personally recommend you Coding Ninjas and Geeks For Geeks for interview preparation.
Application resume tips for other job seekersMake your resume short and try to make it of one page only and do mention all your skills which you are confident of in your resume.
Final outcome of the interviewSelectedI applied via Newspaper Ad and was interviewed before Jun 2021. There were 3 interview rounds.
I was interviewed in Aug 2017.
Merge Sort is a divide and conquer algorithm that sorts an array by dividing it into two halves, sorting them separately, and then merging the sorted halves.
Divide the array into two halves
Recursively sort the two halves
Merge the sorted halves
Find pairs of integers in a BST whose sum is equal to a given number.
Traverse the BST and store the values in a hash set.
For each node, check if (X - node.value) exists in the hash set.
If yes, add the pair (node.value, X - node.value) to the result.
Continue traversal until all nodes are processed.
Merge overlapping time intervals into mutually exclusive intervals.
Sort the intervals based on their start time.
Iterate through the intervals and merge overlapping intervals.
Output the mutually exclusive intervals.
Example: [(1,3), (2,6), (8,10), (15,18)] -> [(1,6), (8,10), (15,18)]
Different types of hashing and alternative for Linear Chaining
Different types of hashing include division, multiplication, and universal hashing
Alternative for Linear Chaining is Open Addressing
Open Addressing includes Linear Probing, Quadratic Probing, and Double Hashing
An AVL tree is a self-balancing binary search tree where the heights of the left and right subtrees differ by at most one.
AVL tree is a binary search tree with additional balance factor for each node.
The balance factor is the difference between the heights of the left and right subtrees.
Insertion and deletion operations in AVL tree maintain the balance factor to ensure the tree remains balanced.
Rotations are performed ...
Find the minimum number of squares whose sum equals to a given number n.
Use dynamic programming to solve the problem efficiently.
Start with finding the square root of n and check if it is a perfect square.
If not, then try to find the minimum number of squares required for the remaining number.
Repeat the process until the remaining number becomes 0.
Return the minimum number of squares required for the given number n.
Insertion sort for a singly linked list.
Traverse the list and compare each node with the previous nodes
If the current node is smaller, swap it with the previous node
Repeat until the end of the list is reached
Time complexity is O(n^2)
I applied via Referral and was interviewed before Apr 2021. There were 2 interview rounds.
Puzzles, Psychometric Test
I was interviewed before May 2021.
Round duration - 90 minutes
Round difficulty - Medium
Around 65-70 people sat for the test. 15 people were shortlisted. It consisted of the following to be done in 90 minutes.
- 28 MCQs based on core CS
- 2 Coding questions – everyone had different and random questions. Most questions were custom logic based (easy level) including some standard questions – LCS, LIS, topological sort.
Round duration - 60 minutes
Round difficulty - Easy
Interviewer was very friendly. It started with the standard – tell me about yourself / introduce yourself type of question. Then he proceeded and asked two coding questions
Your friend has homework to complete. Help him by removing duplicates from a sorted linked list.
You are given the 'Head' of a sorted linked list. Modify the l...
Remove duplicates from a sorted linked list without adjacent duplicates.
Traverse the linked list while comparing current and next nodes.
If they are equal, skip the next node by updating the current node's next pointer.
Repeat until the end of the list is reached.
You are enrolled as a student and must complete N
courses, numbered from 1 to N, to earn your degree.
Some courses have prerequisites, which means that to take course i
,...
Check if it is feasible to complete all courses with prerequisites.
Create a graph representing the prerequisites with courses as nodes and edges as prerequisites.
Perform a topological sort on the graph to check if there is a cycle (if there is, then it's not feasible to complete all courses).
If there is no cycle, then it is feasible to complete all courses.
Round duration - 60 minutes
Round difficulty - Medium
This round had only 1 question. The interviewer introduced himself. And he advised me to clearly understand the problem before proceeding.
You are given a binary tree of distinct integers, along with two nodes, ‘X’ and ‘Y’. Your task is to determine the Lowest Common Ancestor (LCA) of ‘X’ and ‘Y’.
The LC...
Find the Lowest Common Ancestor of two nodes in a binary tree.
Traverse the binary tree to find the paths from the root to nodes X and Y.
Compare the paths to find the last common node, which is the Lowest Common Ancestor.
Implement a recursive function to efficiently find the LCA.
Handle cases where one node is an ancestor of the other.
Consider edge cases like when X or Y is the root node.
Round duration - 60 minutes
Round difficulty - Medium
Pretty Good Round. Fast Paced. We covered a lot of ground.
Design and implement a class BSTIterator
to perform an in-order traversal over a Binary Search Tree (BST). Your implementation should include the following me...
Design and implement a class BSTIterator to perform in-order traversal over a Binary Search Tree (BST).
Implement a parameterized constructor to initialize the iterator with the root of the BST.
Implement a method 'next()' to return the next smallest element in in-order traversal.
Implement a method 'hasNext()' to check if there exists a next smallest element in traversal.
Ensure the output is the in-order traversal of the
Given a binary array 'ARR' of size 'N', your task is to determine the maximum length of a sequence consisting solely of 1’s that can be obtained by converting at...
Find the maximum length of a sequence of 1's by converting at most K zeroes into ones in a binary array.
Iterate through the array and keep track of the current window of 1's and zeroes.
Use a sliding window approach to find the maximum length of consecutive 1's by flipping at most K zeroes.
Update the window based on the number of zeroes flipped and keep track of the maximum length found so far.
Return the maximum length ...
You are given an undirected and disconnected graph G(V, E)
having V
vertices numbered from 0
to V-1
and E
edges. Your task is to print its BFS traversal starting from the 0t...
BFS traversal of an undirected and disconnected graph starting from vertex 0.
Start BFS traversal from vertex 0 and visit all connected nodes in sorted order.
Use a queue to keep track of nodes to visit next.
Keep a visited array to avoid revisiting nodes.
Print the BFS traversal path as the nodes are visited.
Example: For input V=5, E=4 and edges 0-1, 0-2, 1-3, 2-4, the BFS traversal will be [0, 1, 2, 3, 4].
Given an undirected graph with V
vertices (labeled 0, 1, ..., V-1) and E
edges, each edge connects two nodes X
and Y
with a specified weight representing the dis...
Dijkstra's algorithm is used to find the shortest path distance from a source node to all other nodes in an undirected graph.
Implement Dijkstra's algorithm to find the shortest path distance from node 0 to all other nodes in the graph.
Use a priority queue to efficiently select the next node with the shortest distance.
Initialize distances to all nodes as infinity, except for the source node which is 0.
Update distances t...
Round duration - 60 minutes
Round difficulty - Hard
Bar Raised Round. Definitely felt the difficulty.
You are given a string consisting of English alphabet characters. Your task is to identify and return the first character in the string that does not repeat...
Identify and return the first non-repeating character in a string, or the first character if all characters repeat.
Iterate through the string to count the frequency of each character
Iterate through the string again to find the first character with frequency 1
If no such character is found, return the first character of the string
Tip 1 : Practice at least 250 Questions, Give yourself enough time for preparation. Cramming won't take you very far. In books, I really liked Elements of Programming Interviews.
Tip 2 : Make sure to brush up your basics - coding style, OOPs, Language features. They help in making an impression.
Tip 3 : Don't worry about solving the question in the interview. Learn to tackle any random problem with the best of your ability. More often than not, that'd be enough.
Tip 1 : Keep your resume clean - no graphics, no multiple fonts. Keep it one page.
Tip 2 : Don't go over board in mentioning skills, only mention the things you are truly confident about.
I applied via Company Website and was interviewed before Jun 2021. There were 2 interview rounds.
First round was coding as well as aptitude done together went well I guess focusing on codes helps a lot.
I was interviewed before Sep 2020.
Round duration - 90 minutes
Round difficulty - Easy
This was MCQ+Coding round.
Check if two strings are anagrams by comparing the sorted versions of the strings.
Sort both strings and compare if they are equal.
Use a hashmap to store the frequency of characters in each string and compare the maps.
Ignore spaces and punctuation when comparing the strings.
Round duration - 90 minutes
Round difficulty - Easy
This was face to face interview round.
Round duration - 90 minutes
Round difficulty - Easy
This was face to face interview round.
Tip 1 : Participate in live contests on websites like Codechef, Codeforces etc as much as possible.
Tip 2 : Practice previous interview questions from LeetCode, GeeksForGeeks.
Tip 3 : Revise Computer Science subjects like DBMS, OOPS thoroughly.
Add projects and Internships if you have done any and add only those things which you really know.
Final outcome of the interviewSelectedI was interviewed before Sep 2020.
Round duration - 90 Minutes
Round difficulty - Medium
Interview started at 11:00 am. It was an online round. During the coding round I submitted optimized solution and got full acceptance of the solutions.
You are provided with a directed graph composed of 'N' nodes. You have a matrix called 'EDGES' with dimensions M x 2, which specifies the 'M' edges in the graph. Each edge...
Detect cycle in a directed graph using depth-first search (DFS) algorithm.
Use DFS to traverse the graph and detect back edges indicating a cycle.
Maintain a visited array to keep track of visited nodes during traversal.
If a node is visited again during traversal and it is not the parent node, then a cycle exists.
Return true if a cycle is detected, false otherwise.
Round duration - 80 Minutes
Round difficulty - Medium
Interview started at 10:00 am. Interview went well, I was able to connect with the interviewer and enjoyed the whole interview
Find the next smallest palindrome strictly greater than a given number 'N' represented as a string 'S'.
You are given a number in string format, a...
Find the next smallest palindrome greater than a given number represented as a string.
Convert the string to an integer, find the next greater palindrome, and convert it back to a string.
Handle cases where the number is a palindrome or has all digits as '9'.
Consider both odd and even length numbers when finding the next palindrome.
Round duration - 80 Minutes
Round difficulty - Medium
Interview started at 11:00 am. Interview went well.
Given a binary tree of integers, your task is to return the boundary nodes of the tree in Anti-Clockwise direction starting from the root node.
The first line ...
Return the boundary nodes of a binary tree in Anti-Clockwise direction starting from the root node.
Traverse the left boundary nodes in a top-down manner
Traverse the leaf nodes from left to right
Traverse the right boundary nodes in a bottom-up manner
Handle cases where duplicates occur in the boundary nodes
Implement the function without printing as printing is already managed
Tip 1 : For Data Structures number of questions doesn't matter. Try to understand the logic behind them and try to apply them in creating multiple scenario's. Learn them by heart.
Tip 2 : For Web.Development Try to learn full stack development. See which part interests you more, Increase your knowledge horizon, Always try to build a system a system considering It will be served to millions of customers. By doing this 1-2 projects will increase and cover all the major things which one should learn in their career/college.
Tip 1 : Always try to make it a single page
Tip 2 : Always make resume company specific. eg. Data Structures part more if you are applying for MNC's eg. Amazon, Google, DE Shaw, browserstack.