Upload Button Icon Add office photos

Filter interviews by

Quality Austria Central Asia Design Engineer Interview Questions and Answers

Updated 15 Aug 2022

Quality Austria Central Asia Design Engineer Interview Experiences

1 interview found

I applied via LinkedIn and was interviewed in Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Draw SFD and BMD of the given continuous beam.
  • Ans. 

    SFD and BMD of a continuous beam

    • Calculate reactions at supports

    • Draw SFD by taking sections and finding net forces

    • Draw BMD by integrating SFD

    • Identify points of maximum bending moment

    • Check for shear and moment continuity at supports

  • Answered by AI
  • Q2. Find moment of inertia of I section.
  • Ans. 

    The moment of inertia of an I section can be calculated using the formula and dimensions of the section.

    • The moment of inertia is a measure of an object's resistance to changes in rotation.

    • The formula for moment of inertia of an I section is (bd^3)/12 + 2[(b/2)^2t^3]/3, where b is the width, d is the depth, and t is the thickness of the flange.

    • The moment of inertia can be used to calculate the bending stress and deflect...

  • Answered by AI
  • Q3. Zero member force in a truss
  • Ans. 

    Zero member force in a truss refers to the absence of any tension or compression force in a particular member of the truss.

    • A zero member force can occur in a truss when the external loads are balanced and the truss is in a state of static equilibrium.

    • The method of joints and method of sections can be used to determine the zero member forces in a truss.

    • Zero member forces can also occur in symmetrical trusses or when cer...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Also small one liners were also asked which I dont remember. The questions were from only 4 subjects i.e structural analyis, strength of materials, rcc and steel.

Design Engineer Jobs at Quality Austria Central Asia

View all

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical and management

Interview Preparation Tips

Interview preparation tips for other job seekers - You can do interview without any hesitation.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. IS ans IEC standard testing process and methods.

Interview Questionnaire 

3 Questions

  • Q1. Technical sound
  • Q2. Genuine answer is best way to impress the recruiter, and collect more details about company
  • Q3. Only answer for confident questions you know 100% , if you don't know you simply say I don't know that's good way of approach
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.
Round 3 - Technical 

(1 Question)

  • Q1. Tech experience needed more

Interview Preparation Tips

Interview preparation tips for other job seekers - More technical experience needed
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Indeed and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Related to previous work
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Mar 2023, where I was asked the following questions.

  • Q1. Define about your previous job role
  • Ans. 

    In my previous role as a Project Engineer, I managed engineering projects from conception to completion, ensuring timely delivery and quality.

    • Led a team of engineers to design and implement a new manufacturing process, resulting in a 20% increase in efficiency.

    • Coordinated with cross-functional teams to ensure project milestones were met, improving communication and collaboration.

    • Conducted risk assessments and developed...

  • Answered by AI
  • Q2. Crane pad compaction detail
  • Q3. Crane pad area detail
  • Q4. Capacity of crane lifting
  • Q5. Detail in interacting and movement of major component
  • Ans. 

    Effective interaction and movement of major components ensure project success and efficiency in engineering tasks.

    • Understand the specifications of each component to ensure compatibility.

    • Utilize CAD software for precise modeling and visualization of component interactions.

    • Implement a systematic approach for assembly, such as following a step-by-step guide.

    • Conduct regular checks and tests during the movement phase to ide...

  • Answered by AI
  • Q6. Height and weight of major components
  • Q7. Process of Erection
  • Q8. Requirements of Erection
  • Ans. 

    Erection requirements involve planning, safety measures, and coordination for successful project execution.

    • Site Preparation: Ensure the site is cleared and ready for equipment and materials.

    • Safety Protocols: Implement safety measures like PPE and hazard assessments.

    • Equipment Availability: Confirm that all necessary tools and machinery are on-site.

    • Skilled Workforce: Ensure that qualified personnel are available for the ...

  • Answered by AI
  • Q9. How many manpower required in one crane pakage
  • Q10. How many cranes required in one crane pakage
  • Q11. Which tools required for tensioning and torquing
  • Ans. 

    Tensioning and torquing tools ensure proper fastening and load distribution in engineering projects.

    • Torque Wrench: Used to apply a specific torque to fasteners, ensuring they are tightened to the correct specification.

    • Tensioning Tool: Devices like hydraulic tensioners that apply a precise amount of tension to bolts, often used in large structures.

    • Torque Angle Gauge: Measures the angle of rotation after a fastener has b...

  • Answered by AI
  • Q12. Complete detail work of preparation for erection
  • Q13. Detail work process of MCC
  • Ans. 

    MCC (Motor Control Center) work process involves design, installation, and maintenance of electrical control systems for motors.

    • Design: Create layout and specifications for the MCC based on project requirements.

    • Installation: Assemble and install MCC components like circuit breakers, contactors, and control panels.

    • Testing: Conduct functional tests to ensure all components operate correctly and safely.

    • Maintenance: Regula...

  • Answered by AI
  • Q14. Process of MCC closing
  • Ans. 

    MCC closing involves safely shutting down a Motor Control Center, ensuring equipment and personnel safety.

    • 1. Ensure all equipment is in a safe state before closing the MCC.

    • 2. Notify all personnel involved in the operation about the MCC closure.

    • 3. Follow lockout/tagout (LOTO) procedures to prevent accidental re-energization.

    • 4. Gradually reduce load on the MCC by shutting down connected equipment.

    • 5. Monitor voltage and c...

  • Answered by AI
  • Q15. Punch point close plan
  • Q16. How you can stop the mishandling of tools and tackle and major components in site
  • Ans. 

    Implementing strict protocols and training can prevent tool mishandling and ensure safety on site.

    • Conduct regular training sessions on proper tool handling and safety protocols.

    • Implement a tool tracking system to monitor the usage and location of tools.

    • Establish a designated storage area for tools and components to prevent loss and damage.

    • Use color-coded tags or labels to identify tools and their designated users.

    • Condu...

  • Answered by AI
  • Q17. How you can control of tools damages
  • Ans. 

    Implementing preventive measures and regular maintenance can effectively control tool damage in engineering projects.

    • Conduct regular inspections to identify wear and tear, e.g., checking drill bits for dullness.

    • Implement proper storage solutions to prevent accidental damage, such as using toolboxes or racks.

    • Train staff on correct usage techniques to minimize misuse, e.g., demonstrating proper handling of power tools.

    • Es...

  • Answered by AI
  • Q18. Process of pre-com
  • Ans. 

    Pre-com is the process of preparing and organizing project components before execution.

    • Define project scope and objectives clearly.

    • Gather and analyze all necessary data and resources.

    • Develop a detailed project plan with timelines.

    • Identify and allocate roles and responsibilities among team members.

    • Conduct risk assessments and develop mitigation strategies.

  • Answered by AI
  • Q19. Post-com plan at site
  • Ans. 

    A post-com plan outlines the steps for project completion and site handover, ensuring all tasks are finalized efficiently.

    • Conduct a final site inspection to ensure all work meets quality standards.

    • Compile and submit all necessary documentation, including as-built drawings and warranties.

    • Organize a handover meeting with stakeholders to discuss project outcomes and address any concerns.

    • Ensure all safety measures are revi...

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. In written interview most of the questions are about welding
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Introduction.technical
Round 2 - Technical 

(1 Question)

  • Q1. 7Qc tools 5S 8 defect
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jul 2023. There were 2 interview rounds.

Round 1 - Case Study 

Education and work experience

Round 2 - HR 

(5 Questions)

  • Q1. Ard you ready to move any where in india ?
  • Ans. 

    Yes, I am willing to relocate anywhere in India for the right opportunity.

    • I am open to exploring new locations and cultures.

    • I understand the importance of being flexible in order to advance in my career.

    • I have previous experience of relocating for work purposes.

    • I am excited about the prospect of living and working in different parts of India.

  • Answered by AI
  • Q2. Expected salary ?
  • Ans. 

    My expected salary range is $50,000 to $60,000 per year based on my experience and qualifications.

    • Research industry standards for Quality Inspector salaries

    • Consider cost of living in the area

    • Factor in years of experience and relevant certifications

    • Negotiate based on additional benefits offered

  • Answered by AI
  • Q3. What is BIS stand for?
  • Ans. 

    BIS stands for Bureau of Indian Standards.

    • BIS is the national standards body of India.

    • It develops and publishes standards for various products and services.

    • Examples of BIS standards include IS 456 for concrete and IS 2062 for steel.

  • Answered by AI
  • Q4. What us ISO stand for?
  • Ans. 

    ISO stands for International Organization for Standardization.

    • ISO is a non-governmental organization that develops and publishes international standards.

    • It ensures products and services are safe, reliable, and of good quality.

    • Examples of ISO standards include ISO 9001 for quality management and ISO 14001 for environmental management.

  • Answered by AI
  • Q5. Questions about coal sampling and testing?

Quality Austria Central Asia Interview FAQs

How many rounds are there in Quality Austria Central Asia Design Engineer interview?
Quality Austria Central Asia interview process usually has 2 rounds. The most common rounds in the Quality Austria Central Asia interview process are Technical and Resume Shortlist.
How to prepare for Quality Austria Central Asia Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Quality Austria Central Asia. The most common topics and skills that interviewers at Quality Austria Central Asia expect are Staad Pro, Civil, AutoCAD, Steel Structures and Structural Analysis.
What are the top questions asked in Quality Austria Central Asia Design Engineer interview?

Some of the top questions asked at the Quality Austria Central Asia Design Engineer interview -

  1. Draw SFD and BMD of the given continuous be...read more
  2. Find moment of inertia of I secti...read more
  3. Zero member force in a tr...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Bureau Veritas Interview Questions
3.9
 • 117 Interviews
TÜV NORD Interview Questions
3.7
 • 66 Interviews
Cashify Interview Questions
3.8
 • 41 Interviews
Mitra SK Interview Questions
3.7
 • 13 Interviews
InfodriveIndia Interview Questions
4.2
 • 11 Interviews
UL Solutions Interview Questions
4.1
 • 11 Interviews
Reputation.com Interview Questions
4.1
 • 7 Interviews
View all

Fast track your campus placements

View all
Quality Austria Central Asia Design Engineer Salary
based on 28 salaries
₹1.7 L/yr - ₹3 L/yr
51% less than the average Design Engineer Salary in India
View more details

Quality Austria Central Asia Design Engineer Reviews and Ratings

based on 6 reviews

2.5/5

Rating in categories

2.5

Skill development

1.4

Work-life balance

1.6

Salary

2.6

Job security

2.2

Company culture

1.4

Promotions

1.9

Work satisfaction

Explore 6 Reviews and Ratings
Design Engineer

Chandigarh

3-5 Yrs

Not Disclosed

Explore more jobs
Quality Engineer
358 salaries
unlock blur

₹1.2 L/yr - ₹5 L/yr

Quality Inspector
209 salaries
unlock blur

₹1.1 L/yr - ₹4.5 L/yr

Project Engineer
46 salaries
unlock blur

₹2.5 L/yr - ₹4.8 L/yr

Assistant Manager
42 salaries
unlock blur

₹3 L/yr - ₹7.1 L/yr

Structural Design Engineer
35 salaries
unlock blur

₹1.8 L/yr - ₹5 L/yr

Explore more salaries
Compare Quality Austria Central Asia with

Bureau Veritas

3.9
Compare

TÜV NORD

3.7
Compare

Cashify

3.8
Compare

InfodriveIndia

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview