Filter interviews by
Sand bulking is the increase in volume of sand due to the presence of moisture.
Sand bulking can cause errors in volume calculations for construction projects.
It is important to account for sand bulking when determining the amount of sand needed for a project.
The amount of bulking can vary depending on the type of sand and the amount of moisture present.
For example, a sand with a bulking factor of 1.5 means that 1 cubic...
The density of 1 bag of cement varies depending on the type of cement and packaging.
The density of cement ranges from 1100 to 1600 kg/m³
The density of a 50 kg bag of cement is typically around 1440 kg/m³
The density can be affected by factors such as moisture content and temperature
Different types of cement have different densities, for example, Portland cement has a density of 1506 kg/m³
ISMB stands for Indian Standard Medium Weight Beam.
It is a type of structural steel beam used in construction.
It has a standard size range and weight per meter.
ISMB beams are commonly used in building frames, bridges, and other structures.
The designation of ISMB beams includes the width and depth of the beam in millimeters, and the weight per meter in kilograms.
For example, an ISMB 250 beam has a width of 250mm, depth
Top trending discussions
I applied via Naukri.com and was interviewed in Oct 2021. There were 3 interview rounds.
posted on 12 Jul 2023
I applied via Walk-in
In these round we just screening the students for next round GD is the process in which we just see the attitude, discipline and how they expressed there idea towards the topic that we give to them.
I have more knowledge in structural engineering.
Specialization in structural analysis and design
Extensive experience in designing buildings, bridges, and other structures
Knowledge of various materials and construction techniques
Familiarity with relevant codes and standards
Ability to perform structural calculations and simulations
I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.
Mivan formwork is a construction technique that uses aluminum formwork system for casting concrete structures.
Mivan formwork involves setting up aluminum formwork panels, fixing reinforcement bars, pouring concrete, and removing the formwork after the concrete has set.
It is a fast and efficient construction method commonly used for high-rise buildings and large residential projects.
The system allows for smooth finishes...
posted on 17 Jul 2017
I appeared for an interview before Jul 2016.
posted on 11 May 2018
I applied via Naukri.com and was interviewed before May 2017. There was 1 interview round.
The density of soil in the embankment layer varies depending on the type of soil and compaction methods used.
The density of soil in the embankment layer is typically measured in terms of dry density or wet density.
Dry density refers to the mass of solid soil particles per unit volume of soil, while wet density includes the mass of water as well.
The density of soil in the embankment layer is influenced by factors such a...
posted on 14 Oct 2023
I applied via Walk-in and was interviewed in Sep 2023. There were 2 interview rounds.
The weight of green concrete varies depending on the mix design and components used.
The weight of green concrete typically ranges from 140 to 150 pounds per cubic foot.
Factors such as the type and amount of aggregates, cement, water, and admixtures used can affect the weight.
Lightweight concrete can have a lower weight, while high-density concrete can be heavier.
The weight of green concrete is important for structural
The formula for tensile strength of concrete is based on the cross-sectional area and maximum load applied.
Tensile Strength = Maximum Load / Cross-sectional Area
The units for tensile strength are typically in MPa (megapascals)
Tensile strength is an important property of concrete for determining its ability to resist tension forces
For example, if a concrete specimen with a cross-sectional area of 100 square millimeters ...
The water cement ratio of concrete refers to the ratio of the weight of water to the weight of cement used in a concrete mix.
The water cement ratio is a crucial factor in determining the strength and durability of concrete.
A lower water cement ratio results in stronger and more durable concrete.
The ideal water cement ratio varies depending on the type of concrete mix and its intended use.
For example, a typical water ce...
IS code of steel refers to the Indian Standard code for steel materials and products.
IS 2062:2011 - Steel for general structural purposes
IS 1786:2008 - High strength deformed steel bars and wires for concrete reinforcement
IS 8500:1991 - Structural steel - Microalloyed (medium and high strength qualities)
posted on 27 Jan 2024
I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.
I applied via Walk-in and was interviewed in May 2022. There were 2 interview rounds.
Construction material and techniques
Construction labour management
Site work
I applied via Newspaper Ad and was interviewed before Aug 2021. There were 2 interview rounds.
based on 2 reviews
Rating in categories
Civil Site Engineer
25
salaries
| ₹2 L/yr - ₹3.8 L/yr |
Senior Engineer
11
salaries
| ₹3 L/yr - ₹6.6 L/yr |
Site Engineer
9
salaries
| ₹2.5 L/yr - ₹6 L/yr |
Senior Civil Engineer
8
salaries
| ₹2.5 L/yr - ₹5.4 L/yr |
Executive Accountant
7
salaries
| ₹1.4 L/yr - ₹3.2 L/yr |
Lea Associates South Asia
McNally Bharat Engineering
R.V.R. PROJECTS
ABCI Infrastructures