Upload Button Icon Add office photos

Filter interviews by

Bondada Engineering Site Engineer Interview Questions and Answers

Updated 20 Dec 2022

Bondada Engineering Site Engineer Interview Experiences

1 interview found

Site Engineer Interview Questions & Answers

user image Anonymous

posted on 20 Dec 2022

I applied via Naukri.com and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Some basic questions about Ofc work and personal information
  • Q2. Ofc cable blowing how to start
  • Ans. 

    To start OFC cable blowing, follow these steps

    • Ensure that the ducts are clean and free of any obstruction

    • Attach the cable blowing machine to the duct

    • Connect the cable to the machine and start the blowing process

    • Monitor the cable's progress and adjust the machine's speed as needed

    • Once the cable has been blown through the entire length of the duct, detach the machine and cable

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Bondada Engineering Site Engineer interview:
  • Nld
  • Lm
Interview preparation tips for other job seekers - No fear in answering questions be strong
Just one interview it's enough to get job in bepl

Site Engineer Jobs at Bondada Engineering

View all

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. What is penitration test
  • Ans. 

    Penetration test is a method of evaluating the security of a computer system or network by simulating an attack from a malicious source.

    • Penetration test involves identifying vulnerabilities in a system or network.

    • It includes attempting to exploit these vulnerabilities to determine the potential impact of a real attack.

    • The goal of a penetration test is to strengthen the security defenses of the system or network.

    • Common ...

  • Answered by AI
  • Q2. What is water proofing
  • Ans. 

    Waterproofing is a process of making a structure or material resistant to the penetration of water.

    • Waterproofing involves applying materials or coatings to prevent water from seeping through surfaces.

    • It is commonly used in construction to protect buildings from water damage.

    • Examples of waterproofing materials include bituminous coatings, cementitious waterproofing, and liquid membrane systems.

  • Answered by AI
  • Q3. Types of foundation
  • Ans. 

    Types of foundation include shallow, deep, and pile foundations.

    • Shallow foundations are used when the soil is strong enough to support the structure's weight, such as spread footings and mat foundations.

    • Deep foundations are used when the soil is weak and unable to support the structure's weight, such as pile foundations and drilled piers.

    • Pile foundations are deep foundations that consist of long, slender columns driven...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Mivan formwork process?
  • Ans. 

    Mivan formwork is a construction technique that uses aluminum formwork system for casting concrete structures.

    • Mivan formwork involves setting up aluminum formwork panels, fixing reinforcement bars, pouring concrete, and removing the formwork after the concrete has set.

    • It is a fast and efficient construction method commonly used for high-rise buildings and large residential projects.

    • The system allows for smooth finishes...

  • Answered by AI
  • Q2. Finishing process
  • Q3. Reinforcement related

I appeared for an interview before Jul 2016.

Interview Questionnaire 

1 Question

  • Q1. Temperature of Prime coat, Tack Coat, Penetration Grade, various tests on Bitumen, asphalt works, Rolling pattern, Rolling temperature as well as Asphalt Laying temperature, densities of various compacted ...

Interview Preparation Tips

Skills: Knowledge Of Construction Practices, Construction Technology

I applied via Naukri.com and was interviewed before May 2017. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is the density of soil in embankment layer.
  • Ans. 

    The density of soil in the embankment layer varies depending on the type of soil and compaction methods used.

    • The density of soil in the embankment layer is typically measured in terms of dry density or wet density.

    • Dry density refers to the mass of solid soil particles per unit volume of soil, while wet density includes the mass of water as well.

    • The density of soil in the embankment layer is influenced by factors such a...

  • Answered by AI

Interview Preparation Tips

General Tips: This interview was a technical one.The interview eanted to test both my knowledge and communications skills.Most of questions are related with Transportation.
Skills: Technical Knowledge(ML, Technical Knowledge(ML
Duration: <1 week

I applied via Naukri.com and was interviewed in Dec 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Questions related to my work only. Like I mm interested in Tunnel, so question is from tunnel only.
  • Q2. Questions my CV also.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be bold be silent.
Just calm.
All well.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. You can ask any questions related to my department
  • Q2. After reviewing my cV they may ask what is included in it
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Self introduction
Round 3 - HR 

(1 Question)

  • Q1. Salary negotiation
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

25 Civil Engineering related Questions

Round 2 - HR 

(1 Question)

  • Q1. Salary Discussion
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the mix design how we do the mix design of concrete
  • Ans. 

    Mix design is the process of determining the proportions of cement, water, aggregates, and admixtures in concrete to achieve desired properties.

    • Determine the required strength and durability of the concrete

    • Select suitable materials such as cement, aggregates, water, and admixtures

    • Calculate the proportions of each material based on desired properties and specifications

    • Perform trial mixes to test the properties of the co...

  • Answered by AI
  • Q2. All material testings and procedures
  • Q3. Finishing activities

Interview Preparation Tips

Interview preparation tips for other job seekers - Good job platform we get good knowledge of all construction activities.

Bondada Engineering Interview FAQs

How many rounds are there in Bondada Engineering Site Engineer interview?
Bondada Engineering interview process usually has 2 rounds. The most common rounds in the Bondada Engineering interview process are Resume Shortlist and HR.
How to prepare for Bondada Engineering Site Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Bondada Engineering. The most common topics and skills that interviewers at Bondada Engineering expect are Site Engineering, Site Execution, Site Supervision, AutoCAD and Bar Bending Schedule.

Tell us how to improve this page.

Bondada Engineering Site Engineer Salary
based on 7 salaries
₹2.2 L/yr - ₹3.6 L/yr
15% less than the average Site Engineer Salary in India
View more details

Bondada Engineering Site Engineer Reviews and Ratings

based on 4 reviews

4.4/5

Rating in categories

5.0

Skill development

4.1

Work-life balance

3.4

Salary

4.0

Job security

4.4

Company culture

3.4

Promotions

3.7

Work satisfaction

Explore 4 Reviews and Ratings
Site Engineer

Shimoga

0-4 Yrs

Not Disclosed

Explore more jobs
Design Engineer
10 salaries
unlock blur

₹2 L/yr - ₹3.2 L/yr

HR Executive
9 salaries
unlock blur

₹1.4 L/yr - ₹3.5 L/yr

MIS Executive
8 salaries
unlock blur

₹2.2 L/yr - ₹3.5 L/yr

Assistant Manager
7 salaries
unlock blur

₹3.2 L/yr - ₹8 L/yr

Deputy General Manager
7 salaries
unlock blur

₹14 L/yr - ₹18 L/yr

Explore more salaries
Compare Bondada Engineering with

Lea Associates South Asia

4.3
Compare

R.V.R. PROJECTS

4.0
Compare

ABCI Infrastructures

3.4
Compare

VIKRAN Engineering & Exim

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview