Upload Button Icon Add office photos

Ppap Automotive

Compare button icon Compare button icon Compare

Filter interviews by

Ppap Automotive Mechanical Design and Development Engineer Interview Questions, Process, and Tips

Updated 3 Mar 2025

Ppap Automotive Mechanical Design and Development Engineer Interview Experiences

1 interview found

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Type measurement instrument
  • Q2. Type of machining process
  • Ans. 

    Machining processes involve removing material from a workpiece to create the desired shape and size.

    • Common machining processes include turning, milling, drilling, and grinding

    • Turning involves rotating the workpiece while a cutting tool removes material

    • Milling uses a rotating cutter to remove material from the workpiece

    • Drilling creates holes in the workpiece using a rotating drill bit

    • Grinding uses an abrasive wheel to r...

  • Answered by AI
  • Q3. Different between first angle and third angle
  • Ans. 

    First angle and third angle are two different methods of representing orthographic projections in engineering drawings.

    • First angle projection is commonly used in Europe and Asia, where the object is placed in the first quadrant of the projection plane. The views are obtained by projecting the object onto the planes of projection.

    • Third angle projection is commonly used in North America, where the object is placed in the...

  • Answered by AI
  • Q4. Types of cutting
  • Ans. 

    Types of cutting include abrasive cutting, chipless cutting, and shear cutting.

    • Abrasive cutting involves using abrasive particles to cut materials.

    • Chipless cutting involves using tools to deform materials without creating chips.

    • Shear cutting involves using shear forces to cut materials.

    • Examples include laser cutting, waterjet cutting, and guillotine cutting.

  • Answered by AI
  • Q5. How many kinds of lath operation
  • Ans. 

    There are three main types of lathe operations: facing, turning, and boring.

    • Facing: Removing material from the end of a workpiece to create a flat surface.

    • Turning: Removing material from the outer diameter of a workpiece to create a cylindrical shape.

    • Boring: Enlarging an existing hole in a workpiece.

  • Answered by AI

Interview questions from similar companies

I applied via Recruitment Consultant

Interview Questionnaire 

1 Question

  • Q1. Mechanical engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Date

I applied via Walk-in and was interviewed before Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. The First question was tell me about yourself and whats your goal in life?
  • Q2. I said only those things which is not written in my resume and about my goal I said I want to became a successful person in my life and achieving power for doing everything.

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be nervous .
And during interview please feel free and fully confidence.

I applied via Naukri.com and was interviewed in Apr 2020. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is the reason for your job change?

Interview Preparation Tips

Interview preparation tips for other job seekers - 1.Be strong on your resume content
2.Eye contact and communication skills plays major role .
3.Speak in a positive attitude.

Interview Questionnaire 

2 Questions

  • Q1. Define least count
  • Ans. 

    Least count is the smallest measurement that can be taken by a measuring instrument.

    • It is the smallest value that can be measured by an instrument.

    • It is determined by the precision of the instrument.

    • For example, a ruler with a least count of 1 mm can measure up to the nearest millimeter.

    • It is important to consider the least count when selecting an instrument for a specific measurement task.

  • Answered by AI
  • Q2. What is brass
  • Ans. 

    Brass is a metal alloy made of copper and zinc.

    • Brass is commonly used in musical instruments, plumbing fixtures, and decorative items.

    • It has a yellowish-gold color and is corrosion-resistant.

    • The proportion of copper and zinc can vary to create different types of brass with varying properties.

    • Brass can be easily machined and cast.

    • It has a lower melting point than steel and is a good conductor of heat and electricity.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical aptitude questions
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Can you friendly with CREO software ?
  • Ans. 

    Yes, I am friendly with CREO software.

    • I have extensive experience using CREO software for designing and modeling.

    • I am proficient in creating 3D models, assemblies, and drawings using CREO.

    • I have successfully completed projects using CREO software in the past.

    • I am familiar with advanced features and functionalities of CREO software.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good environment for working

Skills evaluated in this interview

I applied via Company Website and was interviewed in Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Discuss about previous company & experience.
Round 3 - Technical 

(1 Question)

  • Q1. Technical question about role which you are applied.

Interview Preparation Tips

Interview preparation tips for other job seekers - This company takes the experience person of the same industry. Still these people shortlist resumes and call for technical interview. In which even after having a good knowledge of this role, his technical person says that we want only the person of the same industry.
Totally full waste of time.
My advice to HR team please confirm your technical team first before shortlist resume.
Please don't waste of time and hope people's.
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Design tool room
  • Q2. Tool room design
  • Q3. Mould maker design

Interview Preparation Tips

Interview preparation tips for other job seekers - Job for design
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Nov 2023.

Round 1 - Technical 

(3 Questions)

  • Q1. Basics of CAD software.
  • Q2. About tools part design assembly and gsd
  • Q3. Basic of plastic defects
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. All about you and your work experience

Ppap Automotive Interview FAQs

How many rounds are there in Ppap Automotive Mechanical Design and Development Engineer interview?
Ppap Automotive interview process usually has 1 rounds. The most common rounds in the Ppap Automotive interview process are Technical.
What are the top questions asked in Ppap Automotive Mechanical Design and Development Engineer interview?

Some of the top questions asked at the Ppap Automotive Mechanical Design and Development Engineer interview -

  1. How many kinds of lath operat...read more
  2. Different between first angle and third an...read more
  3. Type of machining proc...read more

Tell us how to improve this page.

Ppap Automotive Mechanical Design and Development Engineer Interview Process

based on 1 interview

Interview experience

1
  
Bad
View more

Interview Questions from Similar Companies

JBM Group Interview Questions
4.0
 • 266 Interviews
UNO Minda Interview Questions
4.0
 • 168 Interviews
Subros Interview Questions
3.9
 • 167 Interviews
Spark Minda Interview Questions
3.9
 • 122 Interviews
Gabriel India Interview Questions
4.2
 • 95 Interviews
NBC Bearings Interview Questions
3.9
 • 83 Interviews
CIE Automotive Interview Questions
3.7
 • 74 Interviews
View all
Engineer
92 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
64 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
63 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
60 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
57 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Ppap Automotive with

Samvardhana Motherson Group

3.7
Compare

Bharat Forge

3.9
Compare

TVS Sundram Fasteners

3.7
Compare

Rane Holdings

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview