Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Piaggio Team. If you also belong to the team, you can get access from here

Piaggio Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Piaggio Quality Engineer Interview Questions and Answers

Updated 4 Jul 2024

Piaggio Quality Engineer Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jul 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Hight gauge list count
  • Q2. What is 5s , 7 control tools
  • Ans. 

    5S is a methodology for organizing a workplace for efficiency and effectiveness. The 7 control tools are used for quality control and problem-solving.

    • 5S stands for Sort, Set in order, Shine, Standardize, Sustain. It helps in organizing the workplace and improving efficiency.

    • 7 control tools include Histogram, Check sheet, Pareto chart, Cause-and-effect diagram, Scatter diagram, Control chart, and Stratification. They ar...

  • Answered by AI
Round 1 - Technical 

(2 Questions)

  • Q1. Good related question were asked not so difficult
  • Q2. What is my job profile How i am managing things during launch Why i want to left my current organization

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing fjjfjdbbejksjnsbs bhdjdmnnnbvhsnnjnbbdkkjnnn

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
Q4. What is the Physical & Chemical test of Steel Reinforcement?
asked in MM AUTO
Q5. what is IATF audit , cause of IATF , relationship between for IAT ... read more

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. MSA, SPC, PPAP

Interview Preparation Tips

Interview preparation tips for other job seekers - Good document knowledge About Quality

Interview questions from similar companies

I applied via Walk-in and was interviewed in Nov 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is your technical skills
  • Q2. Also prepare all filled related condition

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare our experience and working condition
Also know engineer drawing and GD&T symbol
Good knowledge of process and product
Also prepare technical enquiry
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Tell me about yourself
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Nov 2023. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What is your qualification
  • Q2. What is your current company
Round 2 - Technical 

(3 Questions)

  • Q1. What is a 7qc tool
  • Ans. 

    7QC tools are a set of quality control tools used for process improvement and problem-solving in manufacturing and service industries.

    • Includes tools like Pareto chart, cause-and-effect diagram, control charts, scatter diagrams, etc.

    • Helps in identifying and solving quality-related issues in a systematic manner.

    • Used to analyze data, identify root causes of problems, and monitor process variations.

    • Promotes continuous impr...

  • Answered by AI
  • Q2. What is a RCA
  • Ans. 

    RCA stands for Root Cause Analysis, a method used to identify the underlying cause of a problem or issue.

    • RCA involves investigating the problem, identifying possible causes, analyzing data, and determining the root cause.

    • It helps prevent recurrence of issues by addressing the root cause rather than just treating symptoms.

    • Examples of RCA tools include Fishbone Diagram, 5 Whys, and Fault Tree Analysis.

  • Answered by AI
  • Q3. What is a first angle of projection
  • Ans. 

    First angle of projection is a method of representing a 3D object in a 2D drawing.

    • First angle of projection is commonly used in Europe and Asia.

    • In first angle projection, the object is placed in the first quadrant of the coordinate system.

    • The views of the object are projected onto planes that are perpendicular to each other.

    • This method is often used in engineering and technical drawings to accurately represent the obje

  • Answered by AI
Round 3 - Coding Test 

Drawing & root couse analysis

Interview Preparation Tips

Interview preparation tips for other job seekers - Good knowledge of your company and your department at working position

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. About your self
  • Q2. About your qualifications
  • Q3. About your recently job

I applied via Walk-in and was interviewed in Jun 2021. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. What is the firing order of 4 cylinder engine?
  • Ans. 

    The firing order of a 4 cylinder engine is 1-3-4-2.

    • Firing order refers to the sequence in which each cylinder fires during the engine's cycle.

    • The firing order is determined by the engine's design and can vary between different types of engines.

    • In a 4 cylinder engine, the firing order is usually 1-3-4-2.

    • This means that the first cylinder to fire is the one closest to the front of the engine, followed by the third cylind

  • Answered by AI
  • Q2. What is the function of connecting rod.?
  • Ans. 

    The connecting rod is a crucial component in an engine that connects the piston to the crankshaft.

    • Transfers the linear motion of the piston to the rotational motion of the crankshaft

    • Converts reciprocating motion into rotational motion

    • Provides a link between the piston and the crankshaft

    • Helps in transmitting power from the piston to the crankshaft

    • Acts as a lever to amplify the force exerted by the piston

    • Plays a role in ...

  • Answered by AI
  • Q3. Types of piston ring.?
  • Ans. 

    Piston rings are of three types: compression rings, oil control rings, and wiper rings.

    • Compression rings seal the combustion chamber and transfer heat from the piston to the cylinder wall.

    • Oil control rings regulate the amount of oil on the cylinder wall and prevent oil from entering the combustion chamber.

    • Wiper rings scrape excess oil from the cylinder wall and prevent it from entering the combustion chamber.

    • Materials ...

  • Answered by AI
  • Q4. What is the full form of FIP.?
  • Ans. 

    FIP stands for Fixed Index Annuity.

    • FIP is a type of annuity that offers a guaranteed minimum interest rate.

    • The interest rate is linked to a stock market index, such as the S&P 500.

    • The interest rate is fixed for a certain period of time, usually several years.

    • FIPs are often used as a retirement savings vehicle.

    • They offer the potential for higher returns than traditional fixed annuities, but with less risk than investing

  • Answered by AI
  • Q5. 0.1 is equal to how many microns?
  • Ans. 

    0.1 microns is equal to 100 nanometers.

    • 1 micron is equal to 1000 nanometers.

    • Therefore, 0.1 micron is equal to 100 nanometers.

    • Microns and nanometers are units of length used to measure very small distances.

    • This conversion is commonly used in fields like nanotechnology and microscopy.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. It lasted for about 30 minutes. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my previous experience in like instruments And Guages name. Where it is use Etc.. Basic knowledge of computer related questions.. After that He stresses a lot on the basics related to Engine assembly and Engine components name . Luckily I was able to answer most of the questions correctly.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via AmbitionBox and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Quality engineer related
Round 3 - HR 

(1 Question)

  • Q1. Document related

Interview Preparation Tips

Topics to prepare for Daimler India Commercial Vehicles Quality Engineer interview:
  • Quality Control

I applied via Recruitment Consulltant and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What is your understanding on the role and company
  • Q2. What do you look forward in your career path

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence and skills to justify the role should be present

Piaggio Interview FAQs

How many rounds are there in Piaggio Quality Engineer interview?
Piaggio interview process usually has 1-2 rounds. The most common rounds in the Piaggio interview process are Technical and Resume Shortlist.
What are the top questions asked in Piaggio Quality Engineer interview?

Some of the top questions asked at the Piaggio Quality Engineer interview -

  1. What is 5s , 7 control to...read more
  2. Good related question were asked not so diffic...read more
  3. Hight gauge list co...read more

Tell us how to improve this page.

Piaggio Quality Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Piaggio Quality Engineer Salary
based on 58 salaries
₹1.2 L/yr - ₹4.2 L/yr
33% less than the average Quality Engineer Salary in India
View more details

Piaggio Quality Engineer Reviews and Ratings

based on 13 reviews

4.2/5

Rating in categories

3.6

Skill development

3.7

Work-life balance

3.5

Salary

3.1

Job security

2.9

Company culture

2.8

Promotions

3.5

Work satisfaction

Explore 13 Reviews and Ratings
Assistant Manager
212 salaries
unlock blur

₹4.2 L/yr - ₹12.5 L/yr

Deputy Manager
203 salaries
unlock blur

₹5.2 L/yr - ₹17.7 L/yr

Area Sales Manager
104 salaries
unlock blur

₹4.2 L/yr - ₹18 L/yr

Manager
84 salaries
unlock blur

₹9.3 L/yr - ₹24.6 L/yr

Engineer
66 salaries
unlock blur

₹2.8 L/yr - ₹7.8 L/yr

Explore more salaries
Compare Piaggio with

Escorts Kubota Limited

4.1
Compare

Sonalika Tractors

3.6
Compare

Force Motors

3.6
Compare

Yamaha Motor

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview