Upload Button Icon Add office photos

Filter interviews by

Petrofac Engineering India PDS Designer Interview Questions and Answers

Updated 20 Aug 2020

Petrofac Engineering India PDS Designer Interview Experiences

1 interview found

PDS Designer Interview Questions & Answers

user image Anonymous

posted on 20 Aug 2020

I applied via Naukri.com and was interviewed in Feb 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Technical piping area
  • Q2. Tool test in pds
  • Ans. 

    Tool test in PDS is a process of evaluating the functionality and performance of various tools used in PDS.

    • Tool test helps in identifying the strengths and weaknesses of different tools.

    • It ensures that the selected tools are compatible with the PDS system.

    • Examples of tools that can be tested include piping design software, equipment modeling software, and structural analysis software.

  • Answered by AI
  • Q3. Pump suction discharge

Interview Preparation Tips

Interview preparation tips for other job seekers - piping area

Interview questions from similar companies

I applied via Referral and was interviewed in May 2019. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What is dsr
  • Ans. 

    DSR stands for Daily Sales Report. It is a document that summarizes the sales activities and performance of a business on a daily basis.

    • DSR provides insights into daily sales trends and helps in tracking sales targets.

    • It includes information such as total sales, number of transactions, average transaction value, and sales by product or category.

    • DSR is used by managers to evaluate sales performance, identify areas for i...

  • Answered by AI
  • Q2. How did you check the stock and volume
  • Ans. 

    I used a combination of inventory management software, physical counts, and sales reports to check stock and volume.

    • Utilized inventory management software to track stock levels and monitor volume

    • Conducted regular physical counts to ensure accuracy of stock levels

    • Analyzed sales reports to identify trends and forecast future stock and volume needs

  • Answered by AI
  • Q3. What are the calculations in petrol pump
  • Ans. 

    Calculations in petrol pump involve measuring fuel quantity, calculating cost, and maintaining inventory.

    • Fuel quantity is measured using a flow meter or dipstick.

    • Cost is calculated based on the price per liter or gallon.

    • Inventory is maintained by tracking fuel deliveries and sales.

    • Calculations may also involve taxes, discounts, and loyalty programs.

    • Accuracy is crucial to prevent losses and ensure customer satisfaction.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Mostly need know the perfect calculations and observation and patience need

Skills evaluated in this interview

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. No questions only politics
  • Q2. Only Politics no value for knowledge.
  • Q3. Related questions about your family background and mounding

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not attend the interview without preparing
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Only about Technical planning, progress,execution, local issue,site situation previous job related

Round 3 - Case Study 

Last project experience was the complete case study

Interview Preparation Tips

Topics to prepare for Nayara Energy Senior Manager interview:
  • Industrial Construction
Interview preparation tips for other job seekers - Be prepared with field technical knowledge, progress oriented,planning.

Interview Questionnaire 

1 Question

  • Q1. They asking about Piping job and Statics equipment like exchanger vasel column।
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Why you come in HPL?
Round 3 - Technical 

(2 Questions)

  • Q1. Plant tank farm and utility
  • Q2. Tell about PSA cycle

Interview Preparation Tips

Interview preparation tips for other job seekers - Very poor training program.
If you are fresher then only it is a good company.
Proper manpower allocation is very poor
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is cavitation in centrifugal pump? How do you mean by NPSH?
  • Ans. 

    Cavitation is the formation of vapor bubbles in a centrifugal pump due to low pressure. NPSH stands for Net Positive Suction Head.

    • Cavitation occurs when the pressure at the pump inlet drops below the vapor pressure of the liquid, causing the formation of vapor bubbles.

    • These vapor bubbles collapse when they reach higher pressure areas, leading to damage to the pump impeller and reduced pump performance.

    • Cavitation can be...

  • Answered by AI
  • Q2. What is surging? How do you manage lubrication in different rotating equipment?
  • Ans. 

    Surging is a phenomenon in rotating equipment where the flow rate becomes unstable.

    • Surging occurs when the flow rate through a rotating equipment fluctuates due to changes in operating conditions.

    • It can lead to reduced efficiency, increased wear and tear, and potential damage to the equipment.

    • To manage lubrication in different rotating equipment, it is important to monitor and control the flow rate, viscosity, and temp...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare technical part. Study about reliability of different types of equipment.
Interview experience
2
Poor
Difficulty level
-
Process Duration
4-6 weeks
Result
Not Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. 3d need split core cavity
  • Ans. 

    A split core cavity is necessary for creating 3D designs.

    • Split core cavity allows for easier removal of the final product from the mold.

    • It also allows for more complex designs to be created.

    • Examples include intricate jewelry designs and detailed automotive parts.

    • Split core cavity can be achieved through various methods such as using sliders or lifters.

    • It is important to consider the material being used and the desired

  • Answered by AI
  • Q2. Shrinkage of plastics
  • Ans. 

    Shrinkage of plastics is a common issue in injection molding.

    • Shrinkage occurs when the plastic cools and solidifies, causing it to contract.

    • Factors affecting shrinkage include material type, mold design, and processing conditions.

    • Compensating for shrinkage can be done by adjusting the mold or adding more material.

    • Examples of plastics prone to shrinkage include ABS, polycarbonate, and nylon.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Working on Toys mold

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

All technical skills and your previous experience as well as field experience.

Interview Preparation Tips

Interview preparation tips for other job seekers - It is beneficial for older learners in the organization; however, there is no opportunity for new employees.
Round 1 - Technical 

(1 Question)

  • Q1. How to reduce cost of product
  • Ans. 

    Reducing product cost can be achieved through various methods such as optimizing production processes, sourcing cheaper materials, and reducing waste.

    • Optimize production processes to increase efficiency and reduce labor costs

    • Source cheaper materials without sacrificing quality

    • Reduce waste by implementing lean manufacturing principles

    • Negotiate better prices with suppliers

    • Streamline supply chain to reduce transportation ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidenc is major key in interview..
But Not over confidence.

Petrofac Engineering India Interview FAQs

What are the top questions asked in Petrofac Engineering India PDS Designer interview?

Some of the top questions asked at the Petrofac Engineering India PDS Designer interview -

  1. tool test in ...read more
  2. technical piping a...read more
  3. pump suction dischar...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 433 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
Nayara Energy Interview Questions
4.2
 • 78 Interviews
TechnipFMC Interview Questions
4.0
 • 71 Interviews
Saipem Interview Questions
4.1
 • 45 Interviews
View all
Principal Engineer
66 salaries
unlock blur

₹12 L/yr - ₹32.9 L/yr

Senior Design Engineer
49 salaries
unlock blur

₹8.2 L/yr - ₹19.3 L/yr

Piping Designer
48 salaries
unlock blur

₹4 L/yr - ₹14 L/yr

Design Engineer
43 salaries
unlock blur

₹4.6 L/yr - ₹14.2 L/yr

Senior Engineer
43 salaries
unlock blur

₹9.3 L/yr - ₹25 L/yr

Explore more salaries
Compare Petrofac Engineering India with

Nayara Energy

4.1
Compare

Supreme Industries

4.1
Compare

HPCL-Mittal Energy Limited

4.4
Compare

Ongc Petro Additions

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview