AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
PEGATRON Interview Questions and Answers
13 Interview questions
The number of failure stations in Falcon is not specified.
The number of failure stations in Falcon may vary depending on the specific model or version.
It is recommended to refer to official documentation or contact the manufacturer for accurate information.
Some examples of potential failure stations in Falcon could include power supply failures, communication interface issues, or sensor malfunctions.
The root cause is the underlying reason or source of a problem or issue.
Identifying the root cause involves analyzing the symptoms of the problem and tracing them back to the original source.
It is important to address the root cause rather than just treating the symptoms to prevent the issue from recurring.
Common techniques for root cause analysis include the 5 Whys method and fishbone diagrams.
For example, if a c...
Electronics is the branch of physics and technology that deals with the flow of electrons and their behavior in devices such as circuits and transistors.
Electronics involves the study of electronic components such as resistors, capacitors, diodes, and transistors.
It focuses on the design, construction, and operation of electronic circuits and systems.
Examples of electronic devices include smartphones, computers, t...
Resistors can be found to have low or high values by using a multimeter to measure the resistance.
Use a multimeter to measure the resistance of the resistor
Compare the measured resistance to the expected value of the resistor
If the measured resistance is significantly lower than expected, the resistor is low value
If the measured resistance is significantly higher than expected, the resistor is high value
Aport in safety can prevent accidents and injuries in the workplace.
Aport in safety includes measures such as providing safety equipment, conducting regular safety training, and implementing safety protocols.
Examples of safety equipment include hard hats, safety goggles, and gloves.
Regular safety training can educate employees on how to properly use equipment and identify potential hazards.
Safety protocols can inc...
Warehouse management system can handle inventory, orders, and shipping. Work in line management system can optimize production and reduce waste.
Warehouse management system can track inventory levels and locations, manage orders and shipments, and optimize warehouse layout and organization.
Work in line management system can improve production efficiency by optimizing workflows, reducing waste, and minimizing downti...
Working with chillers involves understanding their components, operation, and maintenance for efficient cooling.
Understand the chiller components: compressor, condenser, evaporator, and expansion valve.
Perform regular maintenance checks, such as cleaning coils and checking refrigerant levels.
Monitor system pressures and temperatures to ensure optimal performance.
Use proper safety equipment and follow protocols whe...
To solve product related technical issues, identify the problem, gather information, troubleshoot, and implement a solution.
Identify the problem by listening to customer complaints or conducting tests
Gather information about the product, its specifications, and any relevant documentation
Troubleshoot by using diagnostic tools, analyzing error codes, or performing tests
Implement a solution by repairing or replacing ...
The major issues of electronic products include component failure, power supply problems, and electromagnetic interference.
Component failure: Electronic products can experience issues with individual components such as resistors, capacitors, or integrated circuits. This can lead to malfunctioning or complete failure of the product.
Power supply problems: Faulty power supply units or inadequate power management can ...
Debugging in PCBA and rework using equipment list
Identify the issue by analyzing the symptoms
Use equipment such as multimeter, oscilloscope, and logic analyzer to diagnose the problem
Replace faulty components or rework the board as necessary
Verify the fix by testing the board again
Maintain a detailed record of the debugging and rework process
PEGATRON Interview Experiences
25 interviews found
Anonymous
Selected
I appeared for an interview in Mar 2025, where I was asked the following questions.
- Q1. Basic Self Introduction
- Q2. They check your communication skills
- Q3. What are the role and responsibilities
Selected
I applied via LinkedIn and was interviewed in Nov 2024. There were 2 interview rounds.
Discussion about work with an interview colleague.
(3 Questions)
- Q1. Self introduction
- Q2. Company introduction
- Q3. Company benefit
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Apr 2024. There was 1 interview round.
(2 Questions)
- Q1. Project details
- Q2. Introduction and educational qualification
Interview Preparation Tips
(3 Questions)
- Q1. Failure analysis engineer
- Q2. How many failure station in falcon
- Ans.
The number of failure stations in Falcon is not specified.
The number of failure stations in Falcon may vary depending on the specific model or version.
It is recommended to refer to official documentation or contact the manufacturer for accurate information.
Some examples of potential failure stations in Falcon could include power supply failures, communication interface issues, or sensor malfunctions.
- Q3. What is the route cause
- Ans.
The root cause is the underlying reason or source of a problem or issue.
Identifying the root cause involves analyzing the symptoms of the problem and tracing them back to the original source.
It is important to address the root cause rather than just treating the symptoms to prevent the issue from recurring.
Common techniques for root cause analysis include the 5 Whys method and fishbone diagrams.
For example, if a circui...
(1 Question)
- Q1. Telling my about experience
Selected
I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.
Sumart Repair action
Interview Preparation Tips
Selected
(3 Questions)
- Q1. Different type of failure analysis
- Ans.
Different types of failure analysis include root cause analysis, FMEA, fault tree analysis, and fishbone diagram.
Root cause analysis: Identifying the underlying cause of a failure to prevent recurrence.
FMEA (Failure Mode and Effects Analysis): Systematically evaluating potential failure modes and their effects.
Fault tree analysis: Mapping out all possible causes of a failure to determine the most likely root cause.
Fish...
- Q2. Short test fail
- Q3. Analog unpowered fail
(2 Questions)
- Q1. Pcba rework full analysis details
- Q2. How to resistor found low value , high value
- Ans.
Resistors can be found to have low or high values by using a multimeter to measure the resistance.
Use a multimeter to measure the resistance of the resistor
Compare the measured resistance to the expected value of the resistor
If the measured resistance is significantly lower than expected, the resistor is low value
If the measured resistance is significantly higher than expected, the resistor is high value
Interview Preparation Tips
I appeared for an interview in Feb 2024.
(1 Question)
- Q1. Good skills commination
(1 Question)
- Q1. Salary package details
Interview Preparation Tips
Mohamed Yasher
Selected
I applied via Walk-in and was interviewed in Jun 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Do you have EMS related experience?
- Q2. How strong you are in technical?
(2 Questions)
- Q1. What is your salary expectation?
- Q2. Is your notice period Negotiatable?
Selected
I applied via Approached by Company and was interviewed in Sep 2023. There were 6 interview rounds.
(1 Question)
- Q1. Why this field your choice
- Ans.
I have always been passionate about leadership and helping others succeed.
I have a natural ability to motivate and inspire others.
I enjoy taking on responsibility and leading a team towards a common goal.
I have previous experience in a similar role and have seen the positive impact I can make.
I believe that being an Assistant Team Leader will allow me to make a difference in the lives of my team members and contribute ...
(1 Question)
- Q1. Yengai yavthu work pannirukigala
(1 Question)
- Q1. What degree ...?
(1 Question)
- Q1. Why this field ....
- Ans.
I am passionate about this field because it allows me to make a positive impact on a team and help them achieve their goals.
I have always enjoyed leading and guiding others, and being an Assistant Team Leader allows me to do that on a daily basis.
I thrive in a fast-paced and dynamic environment, and this field provides ample opportunities for growth and learning.
I have a strong understanding of the industry and its cha...
(1 Question)
- Q1. Y this company choice
Interview Preparation Tips
- Embedded Systems
Selected
I applied via Walk-in
(1 Question)
- Q1. About OEE,MTTR,MTBF
(1 Question)
- Q1. Experience, salary
Interview Preparation Tips
Top trending discussions
PEGATRON Interview FAQs
The duration of PEGATRON interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
PEGATRON Interviews By Designations
- PEGATRON Quality Analyst Interview Questions
- PEGATRON Engineer Interview Questions
- PEGATRON Team Lead Interview Questions
- PEGATRON Senior Engineer Interview Questions
- PEGATRON SAP Consultant Interview Questions
- PEGATRON Process Engineer Interview Questions
- PEGATRON Assistant Team Leader Interview Questions
- PEGATRON Administrator Interview Questions
- Show more
Interview Questions for Popular Designations
- Analyst Interview Questions
- Software Engineer Interview Questions
- Senior Associate Interview Questions
- Senior Engineer Interview Questions
- Sales Executive Interview Questions
- Associate Software Engineer Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Senior Software Engineer Interview Questions
- Show more
Overall Interview Experience Rating
based on 46 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
PEGATRON Reviews and Ratings
based on 453 reviews
Rating in categories
|
Engineer
224
salaries
|  ₹3 L/yr - ₹5.1 L/yr |
|
Senior Engineer
139
salaries
| ₹4 L/yr - ₹7.3 L/yr |
|
Assistant Engineer
68
salaries
| ₹2.5 L/yr - ₹4.5 L/yr |
|
Automation Engineer
65
salaries
| ₹1.5 L/yr - ₹4 L/yr |
|
Process Engineer
51
salaries
| ₹1.9 L/yr - ₹5.2 L/yr |
Dixon Technologies
ECIL
TE Connectivity
Wistron
- Home >
- Interviews >
- PEGATRON Interview Questions
