Filter interviews by
I applied via Company Website and was interviewed before Mar 2023. There was 1 interview round.
I have a strong understanding of inspection processes and recommend thorough documentation, attention to detail, and adherence to regulations.
Understanding of inspection procedures and protocols
Attention to detail in identifying issues and discrepancies
Thorough documentation of findings and recommendations
Adherence to regulations and standards
Utilization of appropriate tools and equipment for inspections
I applied via Company Website and was interviewed in Feb 2023. There were 4 interview rounds.
Manholes are typically covered with a combination of tanking membrane and protection board.
Tanking membrane is a waterproofing material that is applied to the surface of the manhole to prevent water from entering.
Protection board is then placed on top of the tanking membrane to protect it from damage.
The type of protection board used can vary depending on the specific application, but it is typically made of materials ...
Different types of kerb stones used for road work include granite, concrete, and natural stone.
Granite kerb stones are durable and resistant to weathering
Concrete kerb stones are cost-effective and easy to install
Natural stone kerb stones provide an aesthetically pleasing look to the road
Other types of kerb stones include limestone, sandstone, and basalt
Asphalt can be acceptable within a specific temperature range.
Asphalt can be acceptable between certain temperature limits.
The acceptable temperature range for asphalt depends on its intended use.
For road paving, asphalt is typically acceptable between 275°F and 350°F.
Outside of this temperature range, the quality and performance of asphalt may be compromised.
The two types of utility are form utility and time utility.
Form utility refers to the value added to a product through its physical characteristics or design, such as a car's sleek appearance or a smartphone's user-friendly interface.
Time utility refers to the value added to a product by making it available when it is needed, such as a grocery store being open late for customers who work late shifts.
Both types of utili...
Two types of manholes are sewer manholes and utility manholes.
Sewer manholes are used for accessing and maintaining sewer lines.
Utility manholes are used for accessing and maintaining electrical, gas, or telecommunications lines.
Sewer manholes are typically larger and deeper than utility manholes.
Utility manholes may have visible above-ground structures such as transformers or junction boxes.
Both types of manholes requ...
Precast and cast in situ are two methods of concrete construction.
Precast involves casting concrete in a factory and transporting it to the construction site for installation.
Cast in situ involves pouring concrete directly at the construction site.
Precast is often used for standardized elements such as walls, beams, and columns.
Cast in situ is often used for complex shapes and structures.
Both methods have their advanta...
Surface water drainage collection through gulleys is an important aspect of maintaining a safe and functional environment.
Gulleys are channels or trenches that collect and direct surface water runoff.
Properly designed and maintained gulleys prevent flooding and erosion.
Gulleys should be regularly cleaned to prevent blockages and ensure proper drainage.
The collected water should be directed to a suitable drainage system...
Parsons International interview questions for popular designations
I applied via Company Website and was interviewed in Jun 2021. There were 3 interview rounds.
Welfare requirements for QF
QF employees must have access to medical facilities and emergency services
Adequate accommodation and transportation facilities must be provided
Proper sanitation and hygiene facilities must be maintained
Recreational facilities must be provided for the well-being of employees
Regular health check-ups and medical examinations must be conducted
I was interviewed in Jan 2017.
There are three types of standard traffic signs: warning signs, prohibitory signs, and directional signs.
Warning signs: These signs alert drivers to potential hazards or changes in road conditions. Examples include signs for curves, slippery roads, and pedestrian crossings.
Prohibitory signs: These signs indicate actions that are not allowed. Examples include signs for no entry, no parking, and no U-turn.
Directional sig...
The standard of code followed in Qatar for traffic is the Work Zone Traffic Management Guide and the Qatar Construction Specifications (QCS).
The Work Zone Traffic Management Guide provides guidelines and best practices for managing traffic in work zones.
The Qatar Construction Specifications (QCS) outline the technical requirements and standards for construction projects, including traffic management.
These codes ensure ...
The standard size of barriers varies depending on their purpose and location.
The standard size of traffic barriers is typically around 3 to 4 feet in height.
For highway barriers, the standard length is usually 12 to 20 feet.
Barriers used in construction sites or events may have different sizes based on the specific requirements.
Some examples of standard barrier sizes include 3 feet by 10 feet, 4 feet by 8 feet, and 6 f...
A traffic diversion plan involves several steps to ensure smooth flow of traffic.
Identify the need for traffic diversion based on road conditions, construction work, accidents, etc.
Conduct a thorough survey of the area to determine alternative routes and assess their feasibility.
Develop a detailed plan considering factors like traffic volume, road capacity, and safety measures.
Coordinate with relevant authorities, such...
The minimum width of road during TDP varies depending on the type of road and traffic volume.
The minimum width of a single lane road during TDP is typically around 3.7 meters.
For a two-lane road, the minimum width during TDP is usually around 7.3 meters.
In urban areas with heavy traffic, the minimum width of a road during TDP can be as wide as 10 meters or more.
The width of roads during TDP is determined by factors suc...
Top trending discussions
I was interviewed in Jul 2024.
Typically includes an executive summary, background information, a discussion of the findings, proposed solutions, and a conclusion. This reply all questions in detail with studies program
I was interviewed in Dec 2024.
posted on 6 Jan 2025
I applied via Naukri.com and was interviewed in Dec 2024. There was 1 interview round.
The number of variances in SAP can vary depending on the specific processes and transactions being analyzed.
The number of variances in SAP can be influenced by factors such as data entry errors, system glitches, or discrepancies in invoice processing.
Variances in SAP may be identified through reconciliation processes, exception reports, or manual reviews of accounts payable transactions.
Examples of variances in SAP inc...
Accounts receivable and accounts payable are two important aspects of a company's financial operations.
Accounts receivable refers to money owed to a company by its customers for goods or services provided.
Accounts payable refers to money owed by a company to its suppliers or vendors for goods or services received.
Accounts receivable is an asset on the balance sheet, while accounts payable is a liability.
Managing accoun...
Cost element and cost center are key concepts in accounting for tracking and allocating costs within an organization.
Cost element refers to the specific types of costs incurred by an organization, such as materials, labor, or overhead.
Cost center is a specific department, team, or function within an organization that is responsible for incurring costs.
Cost elements are assigned to cost centers to track and allocate cos...
SAP supports over 160 currencies worldwide.
SAP supports over 160 currencies for global transactions.
Currencies can be configured in SAP using transaction code OB22.
Each currency is assigned a unique currency code (e.g. USD for US Dollar, EUR for Euro).
There are various types of projects, including internal projects, external projects, research projects, and development projects.
Internal projects focus on improving processes within the organization.
External projects involve working with external partners or clients.
Research projects aim to gather data and analyze findings.
Development projects focus on creating new products or services.
Examples: IT system implementati...
Interview experience
based on 155 reviews
Rating in categories
Civil Engineer
9
salaries
| ₹15 L/yr - ₹22.7 L/yr |
Civil Inspector
7
salaries
| ₹16.5 L/yr - ₹30 L/yr |
Project Control & Planning Engineer
6
salaries
| ₹30 L/yr - ₹40 L/yr |
Resident Engineer
6
salaries
| ₹24 L/yr - ₹81.7 L/yr |
Resident Electrical Engineer
5
salaries
| ₹30 L/yr - ₹40 L/yr |
Bechtel
Fluor Corporation
Jacobs Engineering Group
AECOM