Upload Button Icon Add office photos

Filter interviews by

Parsons International Interview Questions, Process, and Tips

Updated 28 Jun 2024

Top Parsons International Interview Questions and Answers

View all 20 questions

Parsons International Interview Experiences

Popular Designations

7 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Tell us about yourself
  • Q2. How much do you know about inspection and what would you refer for doing inspection work
  • Ans. 

    I have a strong understanding of inspection processes and recommend thorough documentation, attention to detail, and adherence to regulations.

    • Understanding of inspection procedures and protocols

    • Attention to detail in identifying issues and discrepancies

    • Thorough documentation of findings and recommendations

    • Adherence to regulations and standards

    • Utilization of appropriate tools and equipment for inspections

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare basic HR questions, understand basic terminology that goes in inspection duties and be confident in showing your learning ability and communication skills

Junior Inspector Interview Questions asked at other Companies

Q1. How much do you know about inspection and what would you refer for doing inspection work
View answer (1)
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Feb 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Manholes are covered with ? Manholes are covered with Tanking membrane and protection bord.
  • Ans. 

    Manholes are typically covered with a combination of tanking membrane and protection board.

    • Tanking membrane is a waterproofing material that is applied to the surface of the manhole to prevent water from entering.

    • Protection board is then placed on top of the tanking membrane to protect it from damage.

    • The type of protection board used can vary depending on the specific application, but it is typically made of materials ...

  • Answered by AI
  • Q2. Different types of kerb stone mainly use for road work
  • Ans. 

    Different types of kerb stones used for road work include granite, concrete, and natural stone.

    • Granite kerb stones are durable and resistant to weathering

    • Concrete kerb stones are cost-effective and easy to install

    • Natural stone kerb stones provide an aesthetically pleasing look to the road

    • Other types of kerb stones include limestone, sandstone, and basalt

  • Answered by AI
  • Q3. Rise kerb , flush kerb , Edge kerb are mainly used for road work
Round 3 - Technical 

(2 Questions)

  • Q1. House connections are classified
  • Q2. According to the slope b/w h/s and manhole
Round 4 - Technical 

(8 Questions)

  • Q1. Third party test required For Back filling
  • Ans. Yes therd party test required
  • Answered Anonymously
  • Q2. Asphalt can be acceptable between ?
  • Ans. 

    Asphalt can be acceptable within a specific temperature range.

    • Asphalt can be acceptable between certain temperature limits.

    • The acceptable temperature range for asphalt depends on its intended use.

    • For road paving, asphalt is typically acceptable between 275°F and 350°F.

    • Outside of this temperature range, the quality and performance of asphalt may be compromised.

  • Answered by AI
  • Q3. Utility contain two types
  • Ans. 

    The two types of utility are form utility and time utility.

    • Form utility refers to the value added to a product through its physical characteristics or design, such as a car's sleek appearance or a smartphone's user-friendly interface.

    • Time utility refers to the value added to a product by making it available when it is needed, such as a grocery store being open late for customers who work late shifts.

    • Both types of utili...

  • Answered by AI
  • Q4. Wet utilities and dry utilities
  • Q5. Which are two types of Manhole
  • Ans. 

    Two types of manholes are sewer manholes and utility manholes.

    • Sewer manholes are used for accessing and maintaining sewer lines.

    • Utility manholes are used for accessing and maintaining electrical, gas, or telecommunications lines.

    • Sewer manholes are typically larger and deeper than utility manholes.

    • Utility manholes may have visible above-ground structures such as transformers or junction boxes.

    • Both types of manholes requ...

  • Answered by AI
  • Q6. Precaste and caste in situ
  • Ans. 

    Precast and cast in situ are two methods of concrete construction.

    • Precast involves casting concrete in a factory and transporting it to the construction site for installation.

    • Cast in situ involves pouring concrete directly at the construction site.

    • Precast is often used for standardized elements such as walls, beams, and columns.

    • Cast in situ is often used for complex shapes and structures.

    • Both methods have their advanta...

  • Answered by AI
  • Q7. Surface water drainage collection
  • Q8. Surface water drainage collection through gulleys between
  • Ans. 

    Surface water drainage collection through gulleys is an important aspect of maintaining a safe and functional environment.

    • Gulleys are channels or trenches that collect and direct surface water runoff.

    • Properly designed and maintained gulleys prevent flooding and erosion.

    • Gulleys should be regularly cleaned to prevent blockages and ensure proper drainage.

    • The collected water should be directed to a suitable drainage system...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Recommended to upgrade knowledge and skill, goals and achievements

Top Parsons International Quality Inspector Interview Questions and Answers

Q1. Manholes are covered with ? Manholes are covered with Tanking membrane and protection bord.
View answer (1)

Quality Inspector Interview Questions asked at other Companies

Q1. 1-What is the least count of vernier caliper and micro meter. 2- Told five name of measuring instruments which you are used in the college life. 3- what is the difference between champer and fllit command in Auto CAD. 4- How many types of B... read more
View answer (14)

Infrastructure Inspector Interview Questions & Answers

user image Nikilesh Haridas

posted on 14 May 2023

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. ITP is required or not?
  • Ans. ITP to be prepared by the contractor and verify by the Engineers pror starting any activities
  • Answered by Nikilesh Haridas
  • Q2. Method statement is reqired
  • Ans. Method statement to be sumit by the contractors and approved by the engineers prior starting any activities or
  • Answered by Nikilesh Haridas

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn Roads and drainage specification and International standards

Roads Utility And Drainage Inspector Interview Questions & Answers

user image Nikilesh Haridas

posted on 14 May 2023

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Dune sand can be use for drainage works ?
  • Ans. Dune sand shall not be use for drainage work as per QCS
  • Answered by Nikilesh Haridas
  • Q2. Safety irequire in site work
  • Ans. Safety is cupulsary required prior start the work in site
  • Answered by Nikilesh Haridas

Interview Preparation Tips

Interview preparation tips for other job seekers - Thoroughly learn Qatar Cunstruction specification and other standards required

Parsons International interview questions for popular designations

 HSE Manager

 (1)

 Infrastructure Inspector

 (1)

 Junior Inspector

 (1)

 Quality Inspector

 (1)

 Traffic Inspector

 (1)

Traffic inspector (Works) Interview Questions & Answers

user image Anonymous

posted on 4 Mar 2024

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is QCS ?
  • Q2. What is the height of standard traffic signs
  • Ans. For various traffic signs the height will vary. Most commonly used is 2.1 to 2.3m from base plate to below the sign board. 2.3m height maintained when the sign placed in shared path beside cycle path.
  • Answered Anonymously
  • Q3. What is the max Arm length of traffic signal gantry ?
  • Q4. What are the factors that need to be verified when a temporary traffic diversion plan is submitted
  • Ans. 1. Min width of the lane 3.65m 2. Safe access 3. Any cables below and above the ground. Below ground should have a min clearance to avoid any impact of heavy vehicles. 4. To coordinate with other contractors interface with our project. 5. Road Opening R.O. permit available or not. Etc
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Parsons International Traffic inspector (Works) interview:
  • Traffic management
  • Traffic diversion plans
  • Traffic signs
  • Traffic signals
  • Directional signs
Interview preparation tips for other job seekers - I was hired from India to Qatar. Then I even doesn't know the basics of Qatar construction specifications. Luckily my interviewer was good, understood my situation and hired me in.

HSE Manager Interview Questions & Answers

user image Anonymous

posted on 28 Dec 2021

I applied via Company Website and was interviewed in Jun 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. It was based on PWA and QCS 2014 requirements.
  • Q2. Welfare requirements for QF
  • Ans. 

    Welfare requirements for QF

    • QF employees must have access to medical facilities and emergency services

    • Adequate accommodation and transportation facilities must be provided

    • Proper sanitation and hygiene facilities must be maintained

    • Recreational facilities must be provided for the well-being of employees

    • Regular health check-ups and medical examinations must be conducted

  • Answered by AI
  • Q3. ISO 45001 standards

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear about above concepts.

HSE Manager Interview Questions asked at other Companies

Q1. What is the condition of work location and how to handle the location what is your total experience how many projects will be handle
View answer (2)

I was interviewed in Jan 2017.

Interview Questionnaire 

6 Questions

  • Q1. Types of standard traffic signs(warning, prohibitory, directional signs)
  • Ans. 

    There are three types of standard traffic signs: warning signs, prohibitory signs, and directional signs.

    • Warning signs: These signs alert drivers to potential hazards or changes in road conditions. Examples include signs for curves, slippery roads, and pedestrian crossings.

    • Prohibitory signs: These signs indicate actions that are not allowed. Examples include signs for no entry, no parking, and no U-turn.

    • Directional sig...

  • Answered by AI
  • Q2. Standard of code followed in Qatar for traffic (Work zone traffic management guide, QCS)
  • Ans. 

    The standard of code followed in Qatar for traffic is the Work Zone Traffic Management Guide and the Qatar Construction Specifications (QCS).

    • The Work Zone Traffic Management Guide provides guidelines and best practices for managing traffic in work zones.

    • The Qatar Construction Specifications (QCS) outline the technical requirements and standards for construction projects, including traffic management.

    • These codes ensure ...

  • Answered by AI
  • Q3. Standard size of barriers
  • Ans. 

    The standard size of barriers varies depending on their purpose and location.

    • The standard size of traffic barriers is typically around 3 to 4 feet in height.

    • For highway barriers, the standard length is usually 12 to 20 feet.

    • Barriers used in construction sites or events may have different sizes based on the specific requirements.

    • Some examples of standard barrier sizes include 3 feet by 10 feet, 4 feet by 8 feet, and 6 f...

  • Answered by AI
  • Q4. Process to be followed for a traffic diversion plan
  • Ans. 

    A traffic diversion plan involves several steps to ensure smooth flow of traffic.

    • Identify the need for traffic diversion based on road conditions, construction work, accidents, etc.

    • Conduct a thorough survey of the area to determine alternative routes and assess their feasibility.

    • Develop a detailed plan considering factors like traffic volume, road capacity, and safety measures.

    • Coordinate with relevant authorities, such...

  • Answered by AI
  • Q5. Minimum width of road during TDP
  • Ans. 

    The minimum width of road during TDP varies depending on the type of road and traffic volume.

    • The minimum width of a single lane road during TDP is typically around 3.7 meters.

    • For a two-lane road, the minimum width during TDP is usually around 7.3 meters.

    • In urban areas with heavy traffic, the minimum width of a road during TDP can be as wide as 10 meters or more.

    • The width of roads during TDP is determined by factors suc...

  • Answered by AI
  • Q6. We all knew very well hr people will bargain for the least. And these guys did the same with me too.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Asked me to update my CV as per their requirements and in their format I updated and sent to them.

Round: Technical Interview
Experience: Parsons interviewed me on Skype for almost 50 min and I answered very few qstns as I don't have any idea on Qatar standards. Whatever I know according to Indian standards I explained them. Finally the interviewer said I vl keep you in option only. But luckily no other guy performed better than me may be or they might have not accepted for Parsons offer I was called in 3 days and sent final offer letter.

Skills: Technical Skill And Speaking Skill, Knowledge on traffic diversion plans implementation

Traffic Inspector Interview Questions asked at other Companies

Q1. Standard of code followed in Qatar for traffic (Work zone traffic management guide, QCS)
View answer (1)

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Your life, about you, college family and friend your likes and dislikes and your previous employers

Interview Preparation Tips

Interview preparation tips for other job seekers - Strong technical knowledge is required.

Interview Questionnaire 

6 Questions

  • Q1. Good location job platform in pvt. sector
  • Q2. Salary and HR all allots as other expenses
  • Q3. Dress maintain by company
  • Q4. House rent
  • Q5. Washing expenses
  • Q6. All govt. holiday days

I applied via Campus Placement and was interviewed before Jul 2016. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Tell about your self
  • Ans. 

    I am a customer-oriented professional with excellent communication skills and a passion for providing exceptional service.

    • Strong interpersonal skills

    • Ability to empathize with customers

    • Effective problem-solving abilities

    • Experience in handling customer complaints and inquiries

    • Proficient in using customer support software

    • Proven track record of meeting customer satisfaction goals

  • Answered by AI
  • Q2. Why you choosing our company
  • Ans. 

    I am choosing your company because of your excellent reputation and commitment to customer satisfaction.

    • Your company has a proven track record of providing exceptional customer care.

    • I have heard positive feedback from friends and colleagues about their experiences with your company.

    • Your company's values align with my own, particularly in regards to prioritizing customer satisfaction.

    • I am impressed by the range of servi...

  • Answered by AI
  • Q3. What will you do if you were given 1 millions in amount in your hand. How will you spend it?
  • Ans. 

    I would invest a portion of the money, donate to charity, and use the rest for personal expenses.

    • Invest a portion of the money to secure future financial stability

    • Donate a portion to charity to help those in need

    • Use the remaining amount for personal expenses such as travel, home improvements, and savings

  • Answered by AI
  • Q4. If you want to be an animal like any animal in the world? Which animal you would like to be?
  • Ans. 

    I would like to be a dolphin because of their intelligence, agility, and ability to swim freely in the ocean.

    • Dolphins are known for their high level of intelligence and problem-solving abilities.

    • They are incredibly agile and can swim at high speeds, performing acrobatic jumps and flips.

    • Being a dolphin would allow me to explore the vastness of the ocean and interact with other marine creatures.

    • Dolphins are highly social...

  • Answered by AI

Interview Preparation Tips

Round: Campus drive -GD,HR,HR Interview
Experience: I reached the office at morning 9. Why because they mentioned the interview time was 9 in the offer letter. I was the only one who went there first I was waiting till 10:30, one by one people who got selected in campus drive came After certain number of people came one HR came and escort all the participants in a place like an auditorium. Then they explain about their company and all the stuffs and it got noon. I went to eat with the people who came for the interview and I met so many peoples they became friends to me. After that I started to have interview in calls. Then waited for the results it became evening But unfortunately I didn't got selected,its because that was my first interview I was really nervous and may be my answers were not that much satisfier. After that I left from there. But now I'm ready to face anything.
Tips: You just have to think like we are taking to a customer,our main aim has to make them feel satisfied. Talk with Courage and confidence.

Skills: Communication
College Name: Dhanalakshmi srinivasan college of arts and science for women

Parsons International Interview FAQs

How many rounds are there in Parsons International interview?
Parsons International interview process usually has 2 rounds. The most common rounds in the Parsons International interview process are Technical, Resume Shortlist and One-on-one Round.
What are the top questions asked in Parsons International interview?

Some of the top questions asked at the Parsons International interview -

  1. What is the max Arm length of traffic signal gantr...read more
  2. What are the factors that need to be verified when a temporary traffic diversio...read more
  3. Manholes are covered with ? Manholes are covered with Tanking membrane and prot...read more

Tell us how to improve this page.

Parsons International Interview Process

based on 7 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Infosys Interview Questions
3.6
 • 7.6k Interviews
AECOM Interview Questions
4.2
 • 111 Interviews
Worley Interview Questions
4.2
 • 109 Interviews
Bechtel Interview Questions
4.0
 • 67 Interviews
Mott MacDonald Interview Questions
4.2
 • 42 Interviews
Black & Veatch Interview Questions
4.3
 • 12 Interviews
View all

Parsons International Reviews and Ratings

based on 155 reviews

4.3/5

Rating in categories

3.9

Skill development

4.0

Work-life balance

3.8

Salary

3.3

Job security

4.0

Company culture

3.5

Promotions

4.0

Work satisfaction

Explore 155 Reviews and Ratings
Civil Engineer
9 salaries
unlock blur

₹15 L/yr - ₹22.7 L/yr

Civil Inspector
7 salaries
unlock blur

₹16.5 L/yr - ₹30 L/yr

Resident Engineer
6 salaries
unlock blur

₹24 L/yr - ₹81.7 L/yr

Project Control & Planning Engineer
6 salaries
unlock blur

₹30 L/yr - ₹40 L/yr

Land Surveyor
4 salaries
unlock blur

₹12 L/yr - ₹36.5 L/yr

Explore more salaries
Compare Parsons International with

Bechtel

4.0
Compare

Fluor Corporation

4.3
Compare

Jacobs Engineering Group

4.1
Compare

AECOM

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview