Add office photos
Filter interviews by
P. L. Adke Civil Site Engineer Interview Questions, Process, and Tips
P. L. Adke Civil Site Engineer Interview Experiences
1 interview found
Anonymous
I applied via Approached by Company and was interviewed in Apr 2018. There was 1 interview round.
Interview Questionnaire
8 Questions
- Q1. What will be the Required depth for laying of pipe for water supply from top of the pipe ?
- Ans.
The required depth for laying a pipe for water supply from the top of the pipe depends on various factors.
The depth of the pipe should be sufficient to prevent freezing in cold climates.
The depth should also consider the terrain and any potential obstacles.
Local regulations and codes may specify minimum depth requirements.
The depth may vary based on the pipe material and diameter.
Consideration should be given to future...
- Q2. What is the exactly meaning of kg/cm2 ?
- Ans.
kg/cm2 is a unit of pressure commonly used in engineering and construction.
kg/cm2 stands for kilogram per square centimeter.
It is a unit of pressure that measures the force exerted on a surface area.
It is commonly used in civil engineering and construction to measure the strength and stability of materials.
For example, the compressive strength of concrete is often measured in kg/cm2.
1 kg/cm2 is equal to 98,066.5 pascal
- Q3. How will you take a proportion on site ? Or how will you tell labour ?
- Ans.
To take a proportion on site, I would use a measuring tape or a measuring instrument to determine the required ratio of materials or dimensions.
Measure the dimensions of the objects or areas that need to be proportioned
Calculate the required ratio based on the project specifications
Communicate the ratio to the laborers or workers on site
Provide clear instructions on how to mix or apply the materials in the correct prop...
- Q4. What is the basic requirment for execution of site ?
- Ans.
The basic requirement for execution of a site is proper planning and coordination.
Proper planning and coordination are essential for the successful execution of a site.
Clear understanding of project requirements and objectives.
Availability of necessary resources such as materials, equipment, and manpower.
Effective communication and collaboration among the project team.
Adherence to safety regulations and standards.
Regul...
- Q5. Whats are the main things to check every structure like plaster,Brickwork,Column,wall,beam,Furniture etc. ?
- Q6. What do you learn from your previous experience ?
- Q7. How much water required for 1 cu.m in M20 proportion?
- Ans.
The water required for 1 cu.m in M20 proportion is approximately 186 liters.
The water-cement ratio for M20 concrete is generally 0.55.
The water content is calculated based on the weight of cement used.
For 1 cu.m of M20 concrete, the water required is around 186 liters.
The water content may vary slightly depending on factors like aggregate moisture content.
- Q8. How much feet comes in 1 inch ?
- Ans.
1 inch is equal to 0.0833 feet.
1 inch is equal to 0.0833 feet.
To convert inches to feet, divide the number of inches by 12.
For example, 24 inches is equal to 2 feet (24/12 = 2).
Interview Preparation Tips
Skills: Your weakness, Strength, Software Skills, Technical Knowledge(ML, Body Language, Problem Solving, Presentation Skills, Decision Making Skills
Duration: <1 week
Interview questions from similar companies
I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.
In general, aptitude tests measure ones competence in logical reasoning, numerical skills, or verbal ability.
(5 Questions)
- Q1. What is the technical in my site ?
- Q2. What about this company ?
- Q3. What about my empolys ?
- Q4. In many cases what will be approch in this technical issus ?
- Ans.
The approach to technical issues in civil engineering often involves analyzing the problem, considering various solutions, and selecting the most feasible option.
Identify the technical issue and its impact on the project
Analyze the possible solutions and their pros and cons
Consider factors such as cost, time, and resources
Consult with team members or experts for input
Select the most feasible solution and implement it
Mo
- Q5. What is the technical ?
Interview Preparation Tips
I applied via Naukri.com
(3 Questions)
- Q1. What is cement grade?
- Ans.
Cement grade refers to the strength and quality of cement used in construction.
Cement grade is determined by the compressive strength of cement mortar cubes after 28 days of curing.
The most commonly used cement grades are 33, 43, and 53, indicating their respective compressive strengths in megapascals (MPa).
Higher cement grades are used for structures that require higher strength, such as bridges and high-rise building...
- Q2. Opc 33, 43, 53 grads.
- Q3. The standard size of a concrete cube is 15 cm × 15 cm × 15 cm
- Ans.
Yes, the standard size of a concrete cube is 15 cm × 15 cm × 15 cm.
The standard size of a concrete cube is used for testing the compressive strength of concrete.
The cubes are casted and cured for 28 days before testing.
The cubes are tested using a compression testing machine.
The compressive strength of concrete is calculated by dividing the maximum load applied to the cube by the cross-sectional area of the cube.
Interview Preparation Tips
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What is the curing on site engineering
- Ans.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
- Q2. What is the strength of cement
- Ans.
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
Interview Preparation Tips
a capability to do a job
I applied via Campus Placement and was interviewed in Mar 2022. There were 2 interview rounds.
General knowledge
(2 Questions)
- Q1. About civil engineering
- Q2. General knowledge Civil engineering
Interview Preparation Tips
I'm studying BTech engeneering
& Complete my diploma
I'm a good student
I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Contraction lebal questions
- Q2. Jenral questions
- Q3. Atitude prasnalty
Interview Preparation Tips
Practice (out loud)
Share your story
Provide Evidence and data
Mirror the interviewers style
Prepare a few questions
Ask if they have any hesitation
Say thanks.
(2 Questions)
- Q1. Trouble shooting
- Q2. Monitoring log dob maven
Interview Preparation Tips
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
Test of sand and water mineral
(5 Questions)
- Q1. Direct are located in one place and another place etc..,
- Q2. Overall base of autocad desgin structure
- Ans.
Autocad design structure serves as the foundation for creating detailed and accurate engineering drawings.
Autocad design structure includes layers, blocks, and dimensions to organize and display information.
It allows for precise measurements, annotations, and annotations to be added to drawings.
Autocad design structure enables easy editing and modification of drawings.
Examples of autocad design structures include creat...
- Q3. Graphic design and interior design
- Q4. Design of road line
- Ans.
Design of road line involves determining the alignment, width, and markings of a road to ensure safety and efficiency.
Consider the traffic volume and speed when determining the width of the road.
Ensure proper alignment to minimize sharp curves and slopes.
Include appropriate road markings such as lane dividers, pedestrian crossings, and stop lines.
Take into account factors like drainage, visibility, and road conditions
- Q5. Construction of road project
- Ans.
Construction of road project involves planning, design, and execution of building roads for transportation.
Road project starts with surveying the land and designing the road layout.
Materials like asphalt, concrete, and gravel are used for construction.
Proper drainage systems are essential to prevent water damage to the road.
Quality control measures are implemented to ensure durability and safety.
Regular maintenance and...
Interview Preparation Tips
Web design
Graphic design
Interior design
Pumps desgin
Skills evaluated in this interview
mayuri bhosale
(2 Questions)
- Q1. Oops concepts php
- Q2. Aggregate function php
(1 Question)
- Q1. HDD related Fttx
(1 Question)
- Q1. Expected CTC Why you want to join the company
P. L. Adke Interview FAQs
Some of the top questions asked at the P. L. Adke Civil Site Engineer interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
Civil Site Engineer Interview Questions from Similar Companies
TCS
Accenture
Wipro
Cognizant
Calculate your in-hand salary
- Home >
- Interviews >
- P. L. Adke Interview Questions >
- P. L. Adke Civil Site Engineer Interview Questions
