Filter interviews by
I have a Bachelor's degree in Computer Science and have completed multiple internships in software development.
Bachelor's degree in Computer Science
Multiple internships in software development
I applied via Walk-in and was interviewed in Apr 2024. There was 1 interview round.
I applied via Referral and was interviewed before Nov 2023. There were 2 interview rounds.
Bias-variance tradeoff refers to the balance between underfitting and overfitting in machine learning models.
Bias refers to the error introduced by approximating a real-world problem, while variance refers to the error introduced by the model's sensitivity to fluctuations in the training data.
High bias can lead to underfitting, where the model is too simple to capture the underlying patterns in the data.
High variance c...
I applied via Company Website and was interviewed before Oct 2023. There were 2 interview rounds.
Avg stuff and normal qns nothing more
It was a wonderful experience to be honest
Nasa interview questions for popular designations
I applied via Approached by Company and was interviewed in Sep 2021. There were 2 interview rounds.
...
I handle stress by prioritizing tasks, taking breaks, and seeking support when needed.
I prioritize tasks to ensure that the most important ones are completed first
I take breaks to clear my mind and recharge
I seek support from colleagues or mentors when facing particularly challenging situations
I practice mindfulness and deep breathing exercises to manage my emotions
I maintain a healthy work-life balance to prevent burn
I applied via Company Website and was interviewed in May 2021. There were 3 interview rounds.
Forces on a cantilever beam include bending moment, shear force, and axial force.
Bending moment is the force that causes the beam to bend.
Shear force is the force that acts parallel to the beam's cross-section.
Axial force is the force that acts along the length of the beam.
Example: A cantilever beam with a load applied at the free end will experience bending moment, shear force, and axial force.
Various techniques such as coating, cathodic protection, and inhibitors can be used for anti-corrosion of metal.
Coating: Applying a protective layer on the metal surface to prevent direct contact with corrosive agents. Examples include painting, powder coating, and galvanizing.
Cathodic protection: Placing a sacrificial anode or applying an external electrical current to protect the metal from corrosion. Examples includ...
I applied via Company Website and was interviewed before Apr 2022. There were 2 interview rounds.
I applied via Job Portal and was interviewed in May 2024. There was 1 interview round.
One hour presentation, and 2 round of tech and 1 round of Behavioral.
posted on 24 Jul 2021
Fuselage station refers to a specific location on an aircraft's fuselage.
Fuselage station is a measurement of distance along the fuselage, typically measured in inches or millimeters.
It is used as a reference point for various components and systems on the aircraft.
For example, an aircraft's doors, windows, wings, and tail are all located at specific fuselage stations.
Fuselage station 0 is usually defined as the refere...
Butt line is not a commonly used term. It could refer to the line where the buttocks meet the thighs.
Butt line is not a medical term.
It could refer to the line where the buttocks meet the thighs.
It is not a commonly used term and may have different interpretations depending on the context.
Water line refers to the pipe or tubing that carries water from the main supply to a building or property.
Water line is an essential component of a plumbing system.
It can be made of various materials such as copper, PVC, or galvanized steel.
The size of the water line depends on the water demand of the building or property.
Water lines can be underground or above ground.
A water line break or leak can cause significant da
The question is unclear and seems to contain errors.
The question may be referring to 'fast angle' and 'third angle projection' in technical drawing.
Fast angle refers to a type of projection where the object is viewed from an angle that is not perpendicular to any of its faces.
Third angle projection is a method of drawing 3D objects in which the object is placed in a box with three sides and projected onto a plane.
Witho...
A rivet is a metal fastener used to join two or more pieces of material together permanently.
Rivets are commonly used in construction, automotive, and aerospace industries.
They are inserted into pre-drilled holes and then deformed to hold the materials together.
Rivets can be made of various materials including aluminum, steel, and copper.
They are often used in place of screws or bolts when a permanent joint is required...
The number of cutting angles in a reamer varies depending on the type and size of the reamer.
The number of cutting angles can range from 2 to 6.
The cutting angles are designed to remove material from the workpiece as the reamer rotates.
The cutting angles can be straight or spiral, and can be symmetrical or asymmetrical.
The number and angle of the cutting edges can affect the surface finish and accuracy of the hole.
Exam...
Drill bits can have various cutting angles depending on their purpose and material.
The most common cutting angle for general purpose drill bits is 118 degrees.
Drill bits for harder materials like metal may have a sharper angle of 135 degrees.
Masonry drill bits have a flatter angle of 90 degrees to prevent cracking of the material.
The cutting angle affects the efficiency and precision of the drilling process.
Drill bits are made by various manufacturers using different materials and designs.
Drill bits can be made from high-speed steel, cobalt, carbide, or diamond.
Manufacturers include DeWalt, Bosch, Milwaukee, and Irwin.
The design of the drill bit can vary depending on the intended use, such as twist bits, spade bits, or hole saws.
The number of cutting files depends on the project requirements and design complexity.
The number of cutting files can range from a few to hundreds or even thousands.
It also depends on the type of cutting machine being used.
For example, a laser cutting machine may require different files than a CNC router.
The number of cutting files can also vary based on the material being cut and its thickness.
It is important to have ...
based on 6 interviews
Interview experience
Aerospace Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Scientist
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Scientific Officer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Software Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Indian Space Research Organisation
Boeing
Tata Lockheed Martin Aerostructures
AIRBUS