Upload Button Icon Add office photos

Filter interviews by

Motherson Sumi Wiring Senior Engineer Interview Questions and Answers

Updated 8 Apr 2024

Motherson Sumi Wiring Senior Engineer Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Spc msa iatf process capabilities
  • Q2. Man power handling

Interview Preparation Tips

Topics to prepare for Motherson Sumi Wiring Senior Engineer interview:
  • SPC Study
  • MSA
  • Iatf
Interview preparation tips for other job seekers - Easy interview
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Apr 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. Asked about JIT, OEE, PPM
Round 2 - One-on-one 

(1 Question)

  • Q1. Asked about past Experience. And challanges faced in current organisation.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please don't Join Motherson Sumi Pathredi Plant. Working culture is so bad here. My worst decision is to join MSWIL.

Senior Engineer Interview Questions Asked at Other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
asked in Nagarro
Q2. Write a program: two input, one is N(any integer, lets say 3), se ... read more
asked in Tata Elxsi
Q3. What is Quality Assurance. Difference between Quality assurance a ... read more
Q4. Is it possible to work with multiple threads in core data? If so, ... read more
Q5. When you will perform Half or Full engine overhauling.

Interview questions from similar companies

I applied via Walk-in and was interviewed in May 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Production related questions
  • Q2. Working flow rated questions
  • Q3. Any other factory related
Round 3 - HR 

(1 Question)

  • Q1. Salary related questions
Round 4 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Need good job for my skills and production related.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About HIL testing
  • Q2. About vector tools

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare about CAN
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. P.l.c work,Logic work

Interview Questionnaire 

1 Question

  • Q1. Questions were based on CV

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you've mentioned in your CV

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

7 Questions

  • Q1. Which types of lacquer used on lens and Housing ?
  • Ans. 

    The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.

    • Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.

    • Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.

    • Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for

  • Answered by AI
  • Q2. What is size fine filter ?
  • Ans. 

    A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.

    • Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.

    • They are designed to capture particles that are smaller than what can be filtered by regular filters.

    • These filters can be made of various materials such as paper, fabric, or synthetic fibers.

    • Examples of size ...

  • Answered by AI
  • Q3. On which material direct metalizing is applicable ?
  • Ans. 

    Direct metalizing is applicable on materials that can conduct electricity.

    • Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.

    • The material should be able to conduct electricity for direct metalizing to be applicable.

    • Materials like plastic, glass, and ceramics can be direct metalized.

    • Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.

  • Answered by AI
  • Q4. PC Material
  • Q5. How much UV energy is required for curing?
  • Ans. 

    The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.

    • UV energy required for curing varies depending on the material being cured

    • Intensity of the UV light also affects the amount of energy required

    • UV energy is typically measured in Joules per square centimeter (J/cm²)

    • Examples of materials that require UV curing include adhesives, coatings, and inks

  • Answered by AI
  • Q6. 2500 ~ 3500
  • Q7. How much DFT is required as per standard ?
  • Ans. 

    The amount of DFT required as per standard varies depending on the specific industry and project requirements.

    • The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.

    • Different industries may have different standards for DFT.

    • The complexity and size of the project also influence the amount of DFT required.

    • DFT techniques include scan chains, built-in self-test (BI...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It must be done as like process catroled

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

What kind of behavior for workers

Round 2 - Technical 

(1 Question)

  • Q1. Add your process actives
  • Ans. 

    Process actives are steps or tasks involved in completing a specific process.

    • Identify all the steps involved in the process

    • List the tasks in sequential order

    • Define the inputs and outputs of each step

    • Assign responsibilities for each task

    • Monitor progress and adjust as needed

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep good knowledge about your section

Motherson Sumi Wiring Interview FAQs

How many rounds are there in Motherson Sumi Wiring Senior Engineer interview?
Motherson Sumi Wiring interview process usually has 1-2 rounds. The most common rounds in the Motherson Sumi Wiring interview process are One-on-one Round and Technical.
What are the top questions asked in Motherson Sumi Wiring Senior Engineer interview?

Some of the top questions asked at the Motherson Sumi Wiring Senior Engineer interview -

  1. Spc msa iatf process capabilit...read more
  2. Man power handl...read more
  3. Asked about JIT, OEE, ...read more

Tell us how to improve this page.

Motherson Sumi Wiring Senior Engineer Interview Process

based on 5 interviews

Interview experience

4
  
Good
View more
Motherson Sumi Wiring Senior Engineer Salary
based on 167 salaries
₹4 L/yr - ₹7.5 L/yr
37% less than the average Senior Engineer Salary in India
View more details

Motherson Sumi Wiring Senior Engineer Reviews and Ratings

based on 46 reviews

3.6/5

Rating in categories

3.3

Skill development

3.3

Work-life balance

3.6

Salary

4.5

Job security

3.1

Company culture

3.5

Promotions

3.1

Work satisfaction

Explore 46 Reviews and Ratings
Engineer
272 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
191 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
168 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
160 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
130 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Motherson Sumi Wiring with

Lumax Industries

4.0
Compare

Spark Minda

3.9
Compare

Suprajit Engineering

3.9
Compare

Bosch

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview