Mosanada FMS
10+ Advaiya Solutions Interview Questions and Answers
Q1. how many types of Pumps are used in the HVAC system?
There are mainly two types of pumps used in HVAC systems: centrifugal pumps and positive displacement pumps.
Centrifugal pumps are commonly used in HVAC systems for circulating water or other fluids. They are efficient and have a simple design.
Positive displacement pumps are used for applications where a specific flow rate is required, such as in hydronic heating systems.
Other types of pumps used in HVAC systems include axial flow pumps, mixed flow pumps, and regenerative turb...read more
Q2. what is PPM, after how many months we have done the PPM of chiller, AHU, Pumps and other equipment.
PPM stands for Planned Preventative Maintenance. It should be done every 3-6 months for chillers, AHUs, pumps, and other equipment.
PPM is a proactive approach to maintenance to prevent breakdowns and prolong equipment life.
Chillers, AHUs, pumps, and other critical equipment should undergo PPM every 3-6 months.
Regular PPM helps in identifying potential issues early and ensures optimal performance of the equipment.
PPM involves tasks like cleaning, lubricating, inspecting, and t...read more
Q3. what can happen when the pump motor is heated?
When the pump motor is heated, it can lead to decreased efficiency, increased wear and tear, and potential damage to the motor.
Decreased efficiency: Heat can cause the motor to work harder, leading to decreased efficiency in pumping water.
Increased wear and tear: Excessive heat can accelerate the wear and tear of the motor components, reducing its lifespan.
Potential damage: If the motor overheats, it can lead to permanent damage such as burnt windings or insulation failure.
Lo...read more
Q4. what is a chemical dosing system in a chiller?
A chemical dosing system in a chiller is used to introduce specific chemicals into the water to prevent scaling, corrosion, and biological growth.
It helps maintain the efficiency and longevity of the chiller system.
Chemicals like corrosion inhibitors, biocides, and scale inhibitors are commonly used.
The dosing system carefully controls the amount of chemicals added to the water based on the chiller's requirements.
Q5. How to check the pump motor is heated?
Check the pump motor temperature by touching the motor housing.
Touch the motor housing with your hand to feel for excessive heat
Use a temperature gun to measure the motor temperature
Check for any unusual smells or sounds coming from the motor
Monitor the motor's temperature gauge if available
Q6. what is the AHU belt size?
The AHU belt size can vary depending on the specific model and manufacturer of the air handling unit.
AHU belt size is typically specified by the manufacturer in the unit's documentation.
It is important to refer to the AHU's manual or contact the manufacturer for the exact belt size needed.
AHU belt sizes can range from small belts for residential units to larger belts for commercial or industrial units.
Q7. What are the Safety of chiller?
Safety of chiller includes proper installation, regular maintenance, and following safety protocols.
Proper installation to prevent leaks and malfunctions
Regular maintenance to ensure efficient and safe operation
Following safety protocols such as wearing appropriate PPE and avoiding contact with hot surfaces
Ensuring proper ventilation to prevent overheating
Q8. What will happen if wbt & dbt will equal?
If wbt & dbt are equal, the air is fully saturated and the relative humidity is 100%.
The air is fully saturated with water vapor.
The relative humidity is 100%.
Condensation may occur on surfaces due to the high moisture content in the air.
This condition is known as the dew point temperature.
Q9. What's the superheating?
Superheating is the process of heating a substance above its boiling point without it changing into a gas.
Superheating occurs in steam boilers when steam is heated beyond its saturation temperature.
It increases the energy content of the steam and improves efficiency in power generation.
Superheating is important in industrial processes where precise temperature control is required.
Q10. How many types of compressor?
There are two main types of compressors: positive displacement compressors and dynamic compressors.
Positive displacement compressors: Reciprocating, rotary screw, rotary vane
Dynamic compressors: Centrifugal, axial flow
Q11. How does a VFD work?
A VFD (Variable Frequency Drive) controls the speed of an AC motor by varying the frequency and voltage of the power supplied to the motor.
VFD converts fixed frequency AC power to variable frequency AC power
It adjusts the motor speed by changing the frequency of the electrical power supplied to the motor
VFDs are commonly used in HVAC systems, pumps, conveyors, and other industrial applications
Q12. What is frequency of eddy current test
The frequency of eddy current test depends on the material being tested and the thickness of the material.
The frequency can range from a few hundred Hz to several MHz
Higher frequencies are used for thinner materials and lower frequencies for thicker materials
The frequency also depends on the type of probe being used
For example, a probe with a diameter of 1mm may have a frequency of 1MHz, while a probe with a diameter of 10mm may have a frequency of 100kHz
Q13. What is Sop? What is lotto?
SOP stands for Standard Operating Procedure. Lotto is a game of chance.
SOP is a set of step-by-step instructions to carry out a specific task or operation.
It ensures consistency and quality in the output.
For example, a manufacturing company may have an SOP for assembling a product.
Lotto is a game of chance where players select a set of numbers and hope to match them with the numbers drawn in a lottery.
It is a popular form of gambling in many countries.
Q14. Specifications of glass and quality of concrete
Glass specifications and concrete quality are crucial for structural integrity.
Glass specifications include thickness, strength, and type (e.g. tempered, laminated)
Concrete quality is determined by strength, durability, and workability
Both materials must meet building codes and standards for safety and performance
Proper installation and maintenance are also important for long-term performance
More about working at Mosanada FMS
Top HR Questions asked in Advaiya Solutions
Top Interview Questions from Similar Companies
Reviews
Interviews
Salaries
Users/Month