Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Mold-Tek Technologies Team. If you also belong to the team, you can get access from here

Mold-Tek Technologies Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Mold-Tek Technologies Design Engineer Interview Questions and Answers

Updated 14 Dec 2021

Mold-Tek Technologies Design Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed before Dec 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Related to spm and fixture they may ask

Interview Preparation Tips

Interview preparation tips for other job seekers - Better dont choose this domain and company..if u choosen u ll get suffer after 2 years with no growth

Design Engineer Jobs at Mold-Tek Technologies

View all

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. Why do you resigned previous job
  • Ans. 

    Seeking new challenges and opportunities for growth.

    • Desire for new challenges and opportunities for growth

    • Seeking a better work-life balance

    • Company restructuring or downsizing

    • Relocation to a different city or country

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Tell me about your self, I tried to speak him but trigl the words due to fear.
Tips: I think to attend more interview

I applied via Naukri.com and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Past experience and communication skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

Interview Preparation Tips

Round: Resume Shortlist
Experience: CRITERIA:6.5+ CGPANO BACKLOGS
Tips: TRY TO WORK HARD IN THE EARLIER SEMESTERS TO BE ELIGIBLE FOR MOST OF THE COMPANIES.

Round: Test
Experience: 30 TECHNICAL QUESTIONS, PURELY BRANCH SPECIFIC, EASY AND BASIC CONCEPTS WERE ASKED.30 APTITUDE AND ENGLISH QUESTIONS, VERY EASY
Tips: PREPARE TECHNICAL PART WELLPRACTICE APTITUDE AND ENGLISH FROM www.indiabix.comVERY HELPFUL WEBSITE
Duration: 60 minutes
Total Questions: 60

Round: HR Interview
Experience: GENERAL QUESTIONS WERE ASKED:ABOUT MYSELFFAMILY BACKGROUNDSCHOOLING AND ACADEMIC ACHIEVEMENTSABOUT JOINING TCE
Tips: DON'T MANIPULATE THE TRUTH.ANSWER CLEARLY AND CONFIDENTLY.

Round: Technical Interview
Experience: TECHNICAL QUESTIONS RELATED TO ELECTIVE SUBJECTS WERE ASKED.ALSO DESIGN STEPS OF VARIOUS STRUCTURAL ELEMENTS WERE ASKED.
Tips: BE PREPARED. SAY "DON'T KNOW THE ANSWER" INSTEAD OF SPEAKING NONSENSE. ANSWER ONLY WHAT IS ASKED. EXTRA INFO GIVEN BY YOU CAN GET YOU IN UNWANTED TROUBLE!! :P

General Tips: BEST OF LUCK.
Skill Tips: MAIN FOCUS ON THE WAY YOU COMMUNICATE WITH THE INTERVIEWERS IN ENGLISH!!
Skills: COMMUNICATION SKILLS
College Name: NIT SURAT
Motivation: GOOD REPUTATION. IT WAS EXACTLY MATCHING TO THE JOB PROFILE I ASPIRED FOR.TATA GROUP IS A BIG BRAND IN INDIA AND CAN LEAD TO MANY FUTURE BENEFITS IF YOU SERVE THEM FOR CONSIDERABLE AMOUNT OF TIME.
Funny Moments: THEY ASKED ME: "ANY SUGGESTION FOR IMPROVING OUR SELECTION PROCEDURE?"I ANSWERED: "YOU SHOULD CHANGE IT. TEST SHOULD BE ONLINE RATHER THAN BEING OFFLINE i.e. PEN AND PAPER."THEY WERE IMPRESSED AND APPRECIATED IT. :P

Interview Questionnaire 

3 Questions

  • Q1. Why our company?
  • Ans. 

    Your company's innovative approach to design and engineering aligns with my passion for pushing boundaries and creating impactful solutions.

    • Your company's reputation for excellence in the industry

    • The opportunity to work with a talented and diverse team

    • The chance to work on challenging and exciting projects

    • The potential for professional growth and development

    • The company's commitment to sustainability and social responsi

  • Answered by AI
  • Q2. What can you offer to our company?
  • Ans. 

    I can offer my expertise in design engineering, strong problem-solving skills, and a passion for innovation.

    • Expertise in design engineering

    • Strong problem-solving skills

    • Passion for innovation

    • Ability to work collaboratively in a team environment

    • Experience with CAD software such as SolidWorks and AutoCAD

    • Familiarity with manufacturing processes and materials

    • Excellent communication and presentation skills

  • Answered by AI
  • Q3. You have a good CG why aren’t you going for higher studies?
  • Ans. 

    I believe that practical experience is equally important as higher studies in my field.

    • I have gained valuable experience through internships and projects

    • I am constantly learning and improving my skills through online courses and workshops

    • I am open to pursuing higher studies in the future if it aligns with my career goals

    • I believe that hands-on experience is crucial in the design engineering field

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Two tests were there. One CAT type questions- maths, quant, verbal Another related to the department. Both were objective type.
Tips: Even without any CAT preparation, you can clear it quite easily. For the department related exam, a basic preparation of core subjects for placements is enough. Most of the questions were CV based. No negative marks, I think. So fill all the questions.

Round: Interview
Experience: It went on for about 20 mins. All were technical questions and most of them were from the things I’ve stated in my CV.
Tips: Write only what you’ve done in your CV, if not at least be prepared to defend everything. Otherwise if you are confident with your basics it should not be a big problem to clear this round.

Round: Interview
Experience: By the time I got till here, I already knew that I almost got placed. So it was very friendly and went on for about 10 minutes.

Skill Tips: Being a core design consultancy, more emphasis was on academic performance. I think a CGPA above 7.5 or 8 is very ideal. They looked deep into my internship and project. Various questions about what I had done there and how well I got practical exposure were tested.
College Name: IIT KHARAGPUR

Interview Questionnaire 

1 Question

  • Q1. What is name mangling?
  • Ans. 

    Name mangling is a technique used by compilers to give unique names to functions and variables to avoid naming conflicts.

    • Name mangling is used in C++ to support function overloading.

    • It is also used in Python to avoid naming conflicts in modules.

    • Name mangling can make it difficult to access variables and functions from outside the class in which they are defined.

    • In C++, name mangling can be seen by using the 'nm' comman

  • Answered by AI

Skills evaluated in this interview

I applied via Naukri.com and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Coming to AEM,Interviewer has covered all the topics.

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls don't join in TechMahindra.Especially for AEM Folks.Because there are no projects at all.They force you to learn and work in other domain.Then your AEM knowledge will vanish.Worst Company.

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is AD dns dhcp?
  • Ans. 

    AD DNS DHCP are Microsoft technologies used for network management and authentication.

    • Active Directory (AD) is a directory service used for authentication and authorization of users and computers in a network.

    • Domain Name System (DNS) is used for name resolution of network resources.

    • Dynamic Host Configuration Protocol (DHCP) is used for automatic IP address assignment to network devices.

    • AD, DNS, and DHCP are often used ...

  • Answered by AI
  • Q2. What is IaaS SaaS PaaS?
  • Ans. 

    IaaS, SaaS, and PaaS are cloud computing models that provide different levels of infrastructure, software, and platform services.

    • IaaS (Infrastructure as a Service) provides virtualized computing resources over the internet, such as servers, storage, and networking.

    • SaaS (Software as a Service) delivers software applications over the internet, eliminating the need for local installation and maintenance.

    • PaaS (Platform as ...

  • Answered by AI
Round 3 - Aptitude Test 

General questions for 1 hors online exams

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident in your role and select which role you want to work

Skills evaluated in this interview

I applied via Recruitment Consultant and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Routing and switching related

Interview Preparation Tips

Interview preparation tips for other job seekers - Do your best. Study well.
Its all about God's grace.

I applied via Naukri.com and was interviewed in Nov 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Questions based on the CV we kept
  • Q2. Questions related to powershell, storages, networking in azure IaaS, NSG

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare whatever u kept in CV and the basics

Mold-Tek Technologies Interview FAQs

How to prepare for Mold-Tek Technologies Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Mold-Tek Technologies. The most common topics and skills that interviewers at Mold-Tek Technologies expect are Staad Pro, AutoCAD, CATIA, Concept Design and Fashion Designing.

Tell us how to improve this page.

Mold-Tek Technologies Design Engineer Salary
based on 125 salaries
₹2.4 L/yr - ₹8.5 L/yr
9% less than the average Design Engineer Salary in India
View more details

Mold-Tek Technologies Design Engineer Reviews and Ratings

based on 17 reviews

2.9/5

Rating in categories

2.6

Skill development

3.0

Work-life balance

3.3

Salary

3.0

Job security

2.9

Company culture

2.3

Promotions

2.9

Work satisfaction

Explore 17 Reviews and Ratings
Design Engineer (MBS)

Hyderabad / Secunderabad

2-7 Yrs

₹ 3.2-7.5 LPA

Explore more jobs
Design Engineer
125 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
40 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Checker
39 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Team Lead
25 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Tekla Modeller
20 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Mold-Tek Technologies with

Cyient

3.6
Compare

KPIT Technologies

3.4
Compare

Persistent Systems

3.5
Compare

LTIMindtree

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview