Premium Employer

i

This company page is being actively managed by Mercedes-Benz Research and Development India Team. If you also belong to the team, you can get access from here

Filter interviews by

Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] Interview Questions, Process, and Tips

Updated 28 Jan 2023

Top Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] Interview Questions and Answers

View all 7 questions

Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] Interview Experiences

3 interviews found

I applied via campus placement at Indian Institute of Technology (IIT), Chennai and was interviewed in Dec 2016. There were 5 interview rounds.

Interview Questionnaire 

10 Questions

  • Q1. Tell me about your M. Tech. project?
  • Q2. About B. Tech. Project?
  • Q3. Draw stress-strain curve for Aluminium and mild steel
  • Ans. 

    Stress-strain curves for Aluminium and mild steel

    • Aluminium has a lower yield strength and ultimate tensile strength than mild steel

    • Aluminium has a higher strain hardening rate than mild steel

    • Mild steel has a higher modulus of elasticity than aluminium

    • The stress-strain curve for aluminium is more ductile than that of mild steel

    • The stress-strain curve for mild steel has a distinct yield point, while that of aluminium doe

  • Answered by AI
  • Q4. Draw SFD and BMD for a given beam?
  • Ans. 

    SFD and BMD are graphical representations of shear force and bending moment along a beam.

    • SFD (Shear Force Diagram) shows the variation of shear force along the length of the beam.

    • BMD (Bending Moment Diagram) shows the variation of bending moment along the length of the beam.

    • SFD and BMD are important tools in structural analysis and design.

    • They help in determining the maximum shear force and bending moment in a beam, wh...

  • Answered by AI
  • Q5. Types of welding process?
  • Ans. 

    There are several types of welding processes used in various industries.

    • Arc welding: Uses an electric arc to create heat and join metals.

    • Gas welding: Involves the use of a fuel gas and oxygen to create a flame for welding.

    • Resistance welding: Utilizes the heat generated by resistance to electric current to join metals.

    • TIG welding: Uses a non-consumable tungsten electrode to produce the weld.

    • MIG welding: Involves the use...

  • Answered by AI
  • Q6. What is criteria for designing chassis, what parameters you will consider?
  • Ans. 

    The criteria for designing a chassis involves considering various parameters such as structural integrity, weight distribution, material selection, and manufacturing processes.

    • Structural integrity is crucial to ensure the chassis can withstand the loads and stresses it will encounter during operation.

    • Weight distribution plays a key role in determining the vehicle's stability and handling.

    • Material selection involves cho...

  • Answered by AI
  • Q7. Tell me about yourself?
  • Q8. What are the areas you need improvement?
  • Ans. 

    I need improvement in communication skills and technical knowledge.

    • Improving my communication skills will help me effectively convey ideas and collaborate with team members.

    • Enhancing my technical knowledge will enable me to tackle complex engineering problems more efficiently.

    • Developing my problem-solving skills will help me approach challenges with a systematic and analytical mindset.

    • Gaining more practical experience ...

  • Answered by AI
  • Q9. What are your strengths and weakness?
  • Q10. What are the responsibilities you have towards you family?

Interview Preparation Tips

Round: Test
Experience: I appeared for PGET (Design profile). There was no shortlisting based on resume. There were total 40 questions (20 aptitude & 20 Technical). Total test duration was 1 hour. In aptitude section, questions were mostly from logical reasoning and numerical ability. In Technical section, questions were from SOM, FEA, DOM.
Tips: Questions were easy in both the sections. For Technical section solve previous year GATE question. For Aptitude solve www.Pariksha.co
Duration: 1 hour
Total Questions: 40

Round: Technical Interview
Experience: Those who cleared written test were called for technical interview. Interview process started with Tell me about about yourself. After that they asked questions related to M. Tech. and B. tech. Project. After project, they asked what are the subject that we have studied in our curriculum. They asked what Finite element Softwares I have used. Then they asked which solid element I have used in those Softwares.
Tips: Prepare your resume well, mostly questions from B. Tech. and M. Tech. Project. It's better if you know FEA software and you have taken FEA course. They mostly look for your approach to solve and analyze questions. If you don't know answers don't say no directly, try and recall those concepts, if you are not able to then say no. Be confident that is the most important aspect.

Round: HR Interview
Experience: Those who cleared technical round were called for HR Round. It started with Tell me about yourself. Interview process was very smooth and it's just a interactive session. They asked simple HR questions. They asked about my family background. Even you are not fluent in english, don't worry. If you are able to converse and put your thoughts in front of them confidently, you will get through.
HR round is not elimination round, they might take all, if all of you have impressed them in both technical and HR rounds.
Tips: Do prepare some basic HR questions well. Confidence is the key.

Skills: FEA
College Name: IIT Madras

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Campus Placement and was interviewed in Dec 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Stiffness matrix of 1dimensional beam element in FEM Stress strain curve in depth
  • Ans. 

    Explaining stiffness matrix of 1D beam element and stress-strain curve in FEM.

    • Stiffness matrix of 1D beam element is a 2x2 matrix that relates the nodal displacements to the nodal forces.

    • The stress-strain curve in FEM is used to determine the material properties of the beam element.

    • The curve is obtained by applying a load to the beam and measuring the resulting strain.

    • The slope of the curve is the modulus of elasticity...

  • Answered by AI
  • Q2. What is Resonance ? How do we control it?
  • Ans. 

    Resonance is the phenomenon of oscillation at a specific frequency. It can be controlled by damping or changing the frequency.

    • Resonance occurs when a system is subjected to an external force at its natural frequency.

    • It can cause excessive vibrations and damage to the system.

    • Resonance can be controlled by adding damping to the system or by changing the frequency of the external force.

    • Examples of resonance include a swin...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well and basics of btech mechanical engineering is enough

Post Graduate Engineer Trainee [pget] Interview Questions Asked at Other Companies

Q1. Design a shaft under bending, torsion and axial loads. Which theo ... read more
Q2. If we a cut a spring of length L and stiffness K into two equal p ... read more
Q3. What is the natural frequency of simple mass system if we conside ... read more
Q4. Is Ceria ( the bed which I used in Design of a Catalytic Converte ... read more
Q5. What are different ways of crossing the natural frequency of a sy ... read more

Interview Preparation Tips

Round: Resume Shortlist
Experience: Most of the students applied had been short listed for test.
M TECH & MS Machine Design , Thermal Engineering ,Aerospace.

Round: Test
Experience: Basic Qns were asked.....
Duration: 60 minutes
Total Questions: 50

Round: Group Discussion
Experience: Good GD session. 6 or 7 members per group and around 20 mins was given.Every one got chance to speak and the GD was very peaceful.
Duration: 20min minutes

Round: Technical Interview
Experience: Qns related to project,
Basic Design Engineering qns,
Qns from our area of interests.

Round: Other Interview
Experience: This round of interview was called as HOD Interview.
Mainly regarding what is our expectation from MBRDI.
About the kind of job we are expecting at MBRDI.


Round: HR Interview
Experience: Typical usual HR qns....
HR was very friendly .


Skills:
College Name: IIT Madras

Interview questions from similar companies

Round 1 - Aptitude Test 

Reasoning and computer basics required

Round 2 - HR 

(1 Question)

  • Q1. Educational background and behavior test
Round 3 - Technical 

(1 Question)

  • Q1. Basics of computer languages knowledge required

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to prepare well and crack the interview.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Group Discussion 

Topic is role of a mechanical engineer in a industry

Round 2 - Technical 

(2 Questions)

  • Q1. What is bernouillis principle
  • Ans. 

    Bernoulli's principle states that as the speed of a fluid increases, its pressure decreases.

    • States that an increase in the speed of a fluid results in a decrease in pressure

    • Used to explain lift in airplane wings

    • Can be observed in the flow of a river or stream

  • Answered by AI
  • Q2. What are bending moment diagram
  • Ans. 

    Bending moment diagrams show the variation of bending moment along the length of a beam or structure.

    • Bending moment diagrams are used in structural engineering to visualize the internal forces acting on a beam.

    • They help engineers determine where the beam is experiencing tension or compression.

    • The diagram typically shows positive bending moments as sagging and negative bending moments as hogging.

    • The shape of the bending...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident

Graduate Trainee Interview Questions & Answers

NTT Data user image Ankush Kumar Gupta

posted on 17 Apr 2024

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

It was normal basic math, reasoning and english questions.

Round 2 - One-on-one 

(2 Questions)

  • Q1. He asked computer network questions like TCP vs UDP
  • Q2. NAT, Ip addresses, router, switch

Interview Preparation Tips

Interview preparation tips for other job seekers - This is Network Engineer post. So be ready with only Computer networks fundamental questions.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Tell about yourself
  • Ans. 

    I am a recent graduate with a degree in Business Administration and a passion for marketing and project management.

    • Graduated with a Bachelor's degree in Business Administration

    • Strong interest in marketing and project management

    • Completed internships at marketing agencies and project management firms

  • Answered by AI
  • Q2. Work/internship experience
  • Ans. 

    I have completed internships at two different companies, gaining valuable experience in marketing and project management.

    • Completed internships at two different companies

    • Experience in marketing and project management

    • Learned how to create marketing campaigns and manage project timelines

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Time and work , Coding questions (if -else) ,

Round 2 - Technical 

(2 Questions)

  • Q1. Explain the OOPs concept
  • Ans. 

    OOPs concept stands for Object-Oriented Programming, which is a programming paradigm based on the concept of objects.

    • OOPs focuses on creating objects that contain data and methods to manipulate that data

    • It involves concepts like inheritance, encapsulation, polymorphism, and abstraction

    • Example: Inheritance allows a class to inherit properties and methods from another class

  • Answered by AI
  • Q2. Write code for palindrome check
  • Ans. 

    Code to check if a given string is a palindrome

    • Iterate through the string from both ends and compare characters

    • Use built-in functions like reverse() to simplify the code

    • Consider ignoring spaces and punctuation for a more accurate check

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Why TATA elxsi ?
  • Q2. Will you relocate

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

English test happened

Round 2 - Technical 

(1 Question)

  • Q1. Cloud based questions
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
2-4 weeks
Result
No response

I applied via Campus Placement and was interviewed before Dec 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Easy numerics, logical, coding, technical

Round 2 - One-on-one 

(2 Questions)

  • Q1. Reverse a array
  • Ans. 

    Reverse an array of integers in place

    • Create two pointers, one at the start and one at the end of the array

    • Swap the elements at the two pointers and move them towards the center until they meet

    • Time complexity: O(n), Space complexity: O(1)

  • Answered by AI
  • Q2. Create a list of duplicates in array
  • Ans. 

    Function to find duplicates in an array of integers and return a list of unique duplicates.

    • Iterate through the array and keep track of elements seen before using a hash set.

    • If an element is already in the hash set, add it to the result list.

    • Return the list of unique duplicates found.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not attend this company.
They will say that you are placed.
But they will ghost you and you can't even contact the company.
They say they don't have any information about recruitment.

Skills evaluated in this interview

Mercedes-Benz Research and Development India Interview FAQs

How many rounds are there in Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] interview?
Mercedes-Benz Research and Development India interview process usually has 2 rounds. The most common rounds in the Mercedes-Benz Research and Development India interview process are Resume Shortlist and Technical.
What are the top questions asked in Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] interview?

Some of the top questions asked at the Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] interview -

  1. What is criteria for designing chassis, what parameters you will consid...read more
  2. Draw stress-strain curve for Aluminium and mild st...read more
  3. What are the areas you need improveme...read more

Tell us how to improve this page.

Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Join Mercedes-Benz Research and Development India The best or nothing.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Accenture Interview Questions
3.8
 • 8.1k Interviews
Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Capgemini Interview Questions
3.7
 • 4.7k Interviews
Tata Motors Interview Questions
4.2
 • 994 Interviews
DXC Technology Interview Questions
3.7
 • 795 Interviews
Mphasis Interview Questions
3.4
 • 788 Interviews
NTT Data Interview Questions
3.9
 • 614 Interviews
View all
71% more than the average Post Graduate Engineer Trainee [pget] Salary in India
View more details

Mercedes-Benz Research and Development India Post Graduate Engineer Trainee [pget] Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Senior Engineer
1k salaries
unlock blur

₹10.3 L/yr - ₹32.4 L/yr

Senior Technical Lead
862 salaries
unlock blur

₹13 L/yr - ₹42.5 L/yr

Senior Consultant
748 salaries
unlock blur

₹9.2 L/yr - ₹28 L/yr

Principal Consultant
556 salaries
unlock blur

₹12 L/yr - ₹37.9 L/yr

Senior Software Engineer
517 salaries
unlock blur

₹10 L/yr - ₹32.2 L/yr

Explore more salaries
Compare Mercedes-Benz Research and Development India with

Bosch Global Software Technologies

3.9
Compare

Qualcomm

3.8
Compare

Tata Motors

4.2
Compare

BMW

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview