AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Clear (1)
Meghalaya Cements Graduate Engineer Trainee (Get) Interview Questions, Process, and Tips
Top Meghalaya Cements Graduate Engineer Trainee (Get) Interview Questions and Answers
- Q1. What is slipring induction motor?
- Q2. What is corona effect?
- Q3. What is dol starter?
Meghalaya Cements Graduate Engineer Trainee (Get) Interview Experiences
5 interviews found
Selected
I applied via Campus Placement and was interviewed before Dec 2022. There were 2 interview rounds.
Maths, reasoning and English
(1 Question)
- Q1. About industrial instrument...I e: pressure measuring device, temperature measuring device, flow measuring device, level measuring device, PID controller, op-amp, feedback system, sensor and transducer and...
Interview Preparation Tips
- Industrial instrumentation
- Distributed Control System
I applied via Company Website and was interviewed in Dec 2021. There were 3 interview rounds.
Normal aptitude test
(2 Questions)
- Q1. Normal question who reads in college academic
- Q2. Normal question from ur syllabus
(3 Questions)
- Q1. What is your family background?
- Q2. Why should we hire you?
- Q3. Tell me about yourself.
Interview Preparation Tips
- Related to ur branch
Interview Questionnaire
5 Questions
- Q1. What is slipring induction motor?
- Ans.
A slipring induction motor is a type of AC motor that uses slip rings to transfer power to the rotor.
Consists of a stator and a rotor
Uses slip rings to transfer power to the rotor
Commonly used in applications where variable speed is required
Examples include cranes, elevators, and conveyor systems
- Q2. What is corona effect?
- Ans.
Corona effect is the ionization of air surrounding a conductor due to high voltage gradient.
Occurs in high voltage transmission lines
Leads to power loss and radio interference
Can be reduced by increasing conductor diameter or using bundled conductors
Can also be reduced by using corona rings or grading rings
Can be dangerous for people and animals in close proximity
- Q3. What is dol starter?
- Ans.
Dol starter is an electrical device used to start and stop motors.
Dol stands for Direct-On-Line.
It is used for motors with low to medium power ratings.
It consists of a contactor, overload relay, and start and stop push buttons.
When the start button is pressed, the contactor closes and the motor starts.
When the stop button is pressed, the contactor opens and the motor stops.
- Q4. Transformers losses
- Q5. Power plant related questions.
I applied via Campus Placement and was interviewed in Dec 2020. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Give your brief introduction?
- Q2. Favourite subject
- Ans.
My favourite subject is Mathematics.
I enjoy solving complex problems and equations.
I find it fascinating how mathematical concepts can be applied in various fields.
I have excelled in mathematics throughout my academic career.
I particularly enjoy calculus and statistics.
Mathematics is a fundamental subject that forms the basis of many other subjects.
- Q3. Hobbies
Interview Preparation Tips
Meghalaya Cements interview questions for designations
I applied via Campus Placement
Interview Questionnaire
3 Questions
- Q1. Can you survive alone in East Jaintia Hills?
- Q2. What your father's do?
- Q3. Debate on NRC
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Graduate Engineer Trainee (Get) Interview Questions & Answers
UltraTech Cement
Anku Adarsh
posted on 14 May 2017
I was interviewed before May 2016.
Interview Questionnaire
9 Questions
- Q1. Academic performance overview of 10th, 12th and graduation
- Ans.
Consistent academic performance with top grades in 10th, 12th, and graduation.
Secured above 90% in 10th and 12th board exams.
Maintained a high GPA throughout graduation.
Received academic awards or scholarships for outstanding performance.
Participated in extracurricular activities alongside studies.
Completed relevant projects or internships during academic tenure.
- Q2. Protection equipments and their principle, working and application.
- Ans.
Protection equipments are devices used to ensure safety and prevent harm in various industries.
Protection equipments include safety helmets, gloves, goggles, earplugs, masks, etc.
The principle behind these equipments is to provide a physical barrier or absorb and dissipate energy to protect the user.
For example, safety helmets protect the head from falling objects, gloves protect hands from chemicals or heat, goggles p...
- Q3. Measuring instruments, both electrical and instrumentation, their principle, working and application.
- Ans.
Measuring instruments are devices used to measure physical quantities. They work based on specific principles and have various applications.
Electrical measuring instruments measure electrical quantities like voltage, current, resistance, etc.
Examples of electrical measuring instruments include voltmeters, ammeters, ohmmeters, etc.
They work based on principles like electromagnetic induction, thermal expansion, etc.
Instr...
- Q4. Job profile related problematic situations and my response against it to check decision making ability.
- Q5. Digital electronics and logic gates, their truth tables and practical applications.
- Q6. Safety of man and machine and it's importance in life
- Ans.
Safety of man and machine is crucial for preventing accidents and ensuring a productive and healthy life.
Safety of man and machine is important to prevent accidents and injuries.
It ensures the well-being and productivity of individuals and the smooth functioning of machines.
Safety measures like wearing protective gear, following protocols, and regular maintenance are essential.
Examples include using seat belts in cars,...
- Q7. Projects undertaken during college and summer trainings and internship related questions.
- Q8. Other skills like computer usage and extent of knowledge in other supplementary fields.
- Q9. An interview of shortlisted candidates was conducted at a later stage in the plant by the unit head to basically check the overall performance of the candidate including personality, knowledge, attitude an...
Interview Preparation Tips
Experience: Shortlisting was done on basis of aggregate percentage in graduation and in addition, involvement in sports was given weightage since it's an on-field job and requires the applicant to be fully fit and dynamic.
Tips: Outdoor Sports and it's accolades during academic period are a must these days for similar job profiles like this. There should be a balance between academic and sports performance. Neither of the two should outweigh the othe.
Round: Test
Experience: Core Electrical Engineering basis and conceptual questions involving very less calculation and covering almost everything were asked in written test.
Tips: Anyone who desires to be in these core job profiles, must have sound knowledge of basic and conceptual topics otherwise if somehow someone with poor concepts gets in these profiles, he/she will feel stuck up and the enjoyment factor in job will be negative.
Duration: 30 minutes
Total Questions: 50
Round: Technical + HR Interview
Experience: A complete 45 mins interaction with a panel of 3 members with easy but wide variety of questions was held. My active participation was appreciated after the end of interview.
Tips: Stay calm, be yourself and be candid. Never try to fake yourself or be an ideal student who knows everything. Be humble andalways try to reflect positivity during your interaction with the panel.
Round: Behavioural Interview
Tips: Interviews of this kind will make you uncomfortable and will be really hard for you to get through because of the uncertainty and randomness of questions. You will never figure out what qualities does the interviewer wants on you. The best way to tackle this kind of interviews is be yourself and don't try to over attempt and fool the interviewer
College Name: Bhilai Institute Of Technology, Durg
Graduate Engineer Trainee (Get) Interview Questions & Answers
JK Cement
Anonymous
posted on 1 Apr 2023
Selected
I applied via Campus Placement and was interviewed in Oct 2022. There were 4 interview rounds.
(2 Questions)
- Q1. Test regarding technical questions in core subs
- Q2. Cement production process description and basic questions
Work from home or work from office
(2 Questions)
- Q1. Personal and technical questions
- Q2. Cement manufacturing
Interview Preparation Tips
Study about cement production and company details
Graduate Engineer Trainee (Get) Interview Questions & Answers
JK Cement
Aswin N ECE
posted on 8 Apr 2024
(1 Question)
- Q1. Let introduce about yourself
Interview Questionnaire
1 Question
- Q1. Basice questions
Graduate Engineer Trainee (Get) Interview Questions & Answers
The Ramco Cements
posted on 12 Oct 2022
I applied via Campus Placement and was interviewed before Oct 2021. There were 4 interview rounds.
(2 Questions)
- Q1. Advantages of Schottky Diode.
- Ans.
Schottky diodes have low forward voltage drop, fast switching speed, and low reverse recovery time.
Low forward voltage drop reduces power loss and improves efficiency.
Fast switching speed makes them suitable for high-frequency applications.
Low reverse recovery time reduces switching losses and improves efficiency.
Schottky diodes are commonly used in power supplies, voltage clamping circuits, and RF applications.
- Q2. Description of Lenz's Law.
- Ans.
Lenz's Law states that the direction of an induced current in a conductor is always such that it opposes the change in magnetic field that produced it.
When a magnet is moved towards a coil, a current is induced in the coil in such a direction that it opposes the motion of the magnet.
When a magnet is moved away from a coil, a current is induced in the coil in such a direction that it opposes the change in magnetic field...
Basic Apptitude and Logical Reasoning Questions
(2 Questions)
- Q1. Share something about your Family.
- Q2. Any Leadership activity carried out during graduation.
(3 Questions)
- Q1. Basic questions on Control System
- Q2. Basic Questions on Machines
- Q3. Working of PLC and Programming
- Ans.
PLC is a programmable device used to control industrial processes. Programming involves creating logic using ladder diagrams or code.
PLC stands for Programmable Logic Controller
It is used to control and automate industrial processes
Programming involves creating logic using ladder diagrams or code
PLC programming languages include ladder logic, function block diagrams, and structured text
PLCs are used in various industri...
Interview Preparation Tips
- Reasoning
- Quantitative Apptitude
- Electrical Machines
- Electrical Power System
Clear Practical knowledge and willing to learn.
Skills evaluated in this interview
Meghalaya Cements Interview FAQs
Recently Viewed
INTERVIEWS
Titagarh Rail Systems
No Interviews
INTERVIEWS
Crompton Greaves Consumer Electricals
No Interviews
JOBS
Crompton Greaves Consumer Electricals
No Jobs
INTERVIEWS
Welspun Corp
No Interviews
JOBS
Crompton Greaves Consumer Electricals
No Jobs
SALARIES
Crompton Greaves Consumer Electricals
INTERVIEWS
Texmaco Infrastructure & Holdings
No Interviews
INTERVIEWS
Programmers.io
No Interviews
SALARIES
Crompton Greaves Consumer Electricals
SALARIES
Crompton Greaves Consumer Electricals
Tell us how to improve this page.
Meghalaya Cements Interviews By Designations
- Meghalaya Cements Graduate Engineer Trainee (Get) Interview Questions
- Meghalaya Cements Assistant Engineer Interview Questions
- Meghalaya Cements HR Executive Interview Questions
- Meghalaya Cements Technical Sales Executive Interview Questions
- Meghalaya Cements Electrical Engineer Interview Questions
- Meghalaya Cements Graduate Trainee Interview Questions
- Meghalaya Cements Instrument Engineer Interview Questions
- Meghalaya Cements Technical Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- Graduate Apprentice Trainee Interview Questions
- Graduate Trainee Interview Questions
- Graduate Apprenticeship Trainee Interview Questions
- Graduate Engineer Interview Questions
- Production Graduate Engineer Trainee Interview Questions
- Graduate Student Interview Questions
- Graduate Apprentice Interview Questions
- Post Graduate Engineer Trainee [pget] Interview Questions
- Show more
Meghalaya Cements Graduate Engineer Trainee (Get) Interview Process
based on 1 interview
Interview experience
Graduate Engineer Trainee (Get) Interview Questions from Similar Companies
Meghalaya Cements Graduate Engineer Trainee (Get) Reviews and Ratings
based on 12 reviews
Rating in categories
|
Assistant Engineer
74
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Engineer
46
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Graduate Engineer Trainee (Get)
38
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Sales Executive
26
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Assistant Electrical Engineer
26
salaries
| ₹0 L/yr - ₹0 L/yr |
ACC
UltraTech Cement
Ambuja Cements
Shree Cement
- Home >
- Interviews >
- Meghalaya Cements Interview Questions >
- Meghalaya Cements Graduate Engineer Trainee (Get) Interview Questions
