Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Medha Servo Drives Team. If you also belong to the team, you can get access from here

Medha Servo Drives Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Medha Servo Drives Interview Questions, Process, and Tips for Experienced

Updated 7 Mar 2025

Top Medha Servo Drives Interview Questions and Answers for Experienced

View all 13 questions

Medha Servo Drives Interview Experiences for Experienced

Popular Designations

22 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Dec 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Mathematics, reasoning

Round 2 - Technical 

(4 Questions)

  • Q1. Electric and electronic
  • Q2. Resistor calculation- series/parralal
  • Q3. Unit of capacitance, inductance
  • Ans. 

    Capacitance is measured in farads (F) and inductance is measured in henrys (H).

    • Capacitance is the ability of a component to store electrical charge, measured in farads (F)

    • Inductance is the ability of a component to store energy in a magnetic field, measured in henrys (H)

    • Examples: Capacitors have capacitance measured in farads, while inductors have inductance measured in henrys

  • Answered by AI
  • Q4. Motor work, different electrical symbol
Round 3 - HR 

(1 Question)

  • Q1. Salary expectation

Interview Preparation Tips

Interview preparation tips for other job seekers - General technical knowledge required

Top Medha Servo Drives Service Engineer Interview Questions and Answers

Q1. From induction motor Unit of electrical terms From transducers lvdt Vfd
View answer (1)

Service Engineer Interview Questions asked at other Companies

Q1. What are the compulsory policy excess in four wheeler private vehicles?
View answer (12)

Interview Questions & Answers

user image Shriprakash Singh

posted on 7 Feb 2025

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Related to drone flying.
  • Q2. DGCA Rule regulations

Interview Preparation Tips

Interview preparation tips for other job seekers - If you join this then, Whatever the office employees say, ask them for it in writing.

R&D Engineer Interview Questions & Answers

user image Anonymous

posted on 10 Oct 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. About my previous projects. How it is designed, developed, Moto of the project. And entire project life cycle.
  • Q2. What are types of voltage regulators. Explain them.
  • Ans. 

    Types of voltage regulators include linear regulators, switching regulators, and shunt regulators.

    • Linear regulators: provide a stable output voltage by dissipating excess power as heat (e.g. LM317)

    • Switching regulators: more efficient than linear regulators by switching the input voltage on and off (e.g. LM2596)

    • Shunt regulators: regulate voltage by shunting excess current to ground (e.g. TL431)

  • Answered by AI
  • Q3. Working principle of Project that is developed earlier.
  • Ans. 

    The working principle of the project developed earlier involved utilizing machine learning algorithms to analyze data and make predictions.

    • Used supervised learning techniques to train the model

    • Implemented feature engineering to improve model performance

    • Utilized cross-validation to assess model accuracy

    • Applied the trained model to new data for prediction

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. What are the salary expectations and why?

Interview Preparation Tips

Topics to prepare for Medha Servo Drives R&D Engineer interview:
  • Embedded Systems
  • Embedded C
  • Embedded hardware
  • IOT
  • Project Management
  • Project Engineering
Interview preparation tips for other job seekers - Be sure about your work experiences, skills and projects done from academics to till date including projects we involved in previous employer(if experienced). Get thorough with the job description you are applied. Make sure your skills matcher the JD. Most important in my point of view try to learn about new technologies emerging besides the current ones.

Skills evaluated in this interview

R&D Engineer Interview Questions asked at other Companies

Q1. give some ideal characteristics of opamp. what is CMRR. what is the practical significance of CMRR. why the input impedance must be large. what is impedance matching, why it has to be done. what is MPTT and its advantages. explain about D-A... read more
View answer (1)

Driver Interview Questions & Answers

user image Anonymous

posted on 21 Aug 2023

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Fair and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. I am a heavy driver
  • Q2. I have skills in driving
  • Q3. Salary expertation were will
  • Q4. Company gowth and developer
  • Q5. Development my skills
  • Q6. Helping nature is a goog

Interview Preparation Tips

Interview preparation tips for other job seekers - Driving is my best profession

Driver Interview Questions asked at other Companies

Q1. How to receive our customer in the office while meet you
View answer (2)

Medha Servo Drives interview questions for popular designations

 Service Engineer

 (10)

 Technical Assistant

 (5)

 R&D Engineer

 (5)

 Technician

 (3)

 Graduate Engineer Trainee (Get)

 (3)

 Technician Fitter

 (2)

 ITI Electrician

 (2)

 Engineer Trainee

 (2)

Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Oct 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Op amp micro controller

Top Medha Servo Drives Technical Assistant Interview Questions and Answers

Q1. What is the circuit breaker
View answer (3)

Technical Assistant Interview Questions asked at other Companies

Q1. 1.What are the main reasons and root cause for less count in Bulk packing.
View answer (2)

Get interview-ready with Top Medha Servo Drives Interview Questions

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. What is the AP state capital
  • Ans. 

    The capital of Andhra Pradesh (AP) is Amaravati.

    • The capital city of Andhra Pradesh is Amaravati.

    • Amaravati is located on the banks of the Krishna River.

    • It was chosen as the capital of AP in 2017, replacing Hyderabad.

  • Answered by AI
  • Q2. What qualifications
  • Q3. Do you now befor any work

Helper, Technician Interview Questions asked at other Companies

Q1. Interduce ur self? Experice in other companies? Thats all.. And all so.. Tell mee about ur btech study experice?. And tell mee ur favorite subject? ...
View answer (1)

Jobs at Medha Servo Drives

View all
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Ask technical questions for motors and machines

QA QC Engineer Interview Questions asked at other Companies

Q1. wha is your response ?, if material will purchase from any factory then what will u do that ? , how many hours can u do work in a day?, do u know all plant calibration?, how the borrow area will select ?, how u manage your junior in work pe... read more
View answer (4)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Normal electrical basic question asking and some regioning quetion also askin aptitude test.

Round 2 - Technical 

(5 Questions)

  • Q1. Basic of transformer
  • Q2. Igbt working process
  • Ans. 

    IGBT stands for Insulated Gate Bipolar Transistor, a semiconductor device used for switching applications in power electronics.

    • IGBT combines the advantages of MOSFETs and bipolar transistors

    • It has three terminals: gate, collector, and emitter

    • Works by controlling the voltage applied to the gate terminal to switch the device on and off

    • Used in applications like motor drives, inverters, and power supplies

  • Answered by AI
  • Q3. Scr working process
  • Ans. 

    SCR (Silicon Controlled Rectifier) is a semiconductor device used for controlling large amounts of electrical power.

    • SCR is a type of thyristor used in power control applications.

    • It consists of four layers of alternating N and P-type material.

    • SCR works by controlling the flow of current between the anode and cathode.

    • It requires a trigger signal to turn on and start conducting.

    • Once triggered, SCR will continue to conduct...

  • Answered by AI
  • Q4. Bridge rectifier working process
  • Ans. 

    A bridge rectifier is a type of full-wave rectifier that converts AC to DC by using four diodes in a bridge configuration.

    • Bridge rectifier uses four diodes to convert AC to DC.

    • It rectifies both halves of the AC input waveform.

    • The output voltage is the absolute value of the input voltage.

    • Commonly used in power supplies and battery chargers.

  • Answered by AI
  • Q5. Symbols of diode scr igbt thyristor
  • Ans. 

    Symbols of diode, SCR, IGBT, and thyristor are important for understanding and troubleshooting electronic circuits.

    • Diode symbol: Arrow pointing towards a line representing the cathode

    • SCR symbol: Three layers with a gate, anode, and cathode

    • IGBT symbol: Combination of a MOSFET and a bipolar transistor

    • Thyristor symbol: Similar to SCR but with an additional gate terminal

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company for interview they prepare to basic of electrical and electronics.

Top Medha Servo Drives Service Engineer Interview Questions and Answers

Q1. From induction motor Unit of electrical terms From transducers lvdt Vfd
View answer (1)

Service Engineer Interview Questions asked at other Companies

Q1. What are the compulsory policy excess in four wheeler private vehicles?
View answer (12)
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed in Jun 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. How to reduce resistance for transformer
  • Ans. 

    To reduce resistance in a transformer, one can use low resistance materials, increase the cross-sectional area of the winding, and minimize the length of the winding.

    • Use low resistance materials for the transformer windings

    • Increase the cross-sectional area of the winding to reduce resistance

    • Minimize the length of the winding to reduce resistance

    • Ensure proper insulation to avoid any short circuits

    • Maintain proper cooling

  • Answered by AI

Junior Engineer Interview Questions asked at other Companies

Q1. What is the main role of Junior engineer in Electrical maintenance and How to provide the company facilities ?
View answer (25)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is Toughness. why curve use on bending path . Description about Britillness. Why CO is more dangerous than CO2.
  • Ans. 

    Toughness is a material's ability to withstand stress without breaking. Curve is used on bending path to prevent cracking. Brittle materials lack toughness. CO is more dangerous than CO2 due to its ability to bind with hemoglobin.

    • Toughness is the ability of a material to absorb energy and deform without fracturing.

    • Curves are used on bending paths to distribute stress evenly and prevent cracking.

    • Brittle materials lack t...

  • Answered by AI
  • Q2. Description about Ferrous metal. What is Ductility .
  • Ans. 

    Ferrous metals are those that contain iron. Ductility is the ability of a material to be stretched without breaking.

    • Ferrous metals include steel and cast iron.

    • Ductility is measured by the amount of deformation a material can undergo before it breaks.

    • Ductile materials are often used in construction and engineering, as they can be easily shaped and formed.

    • Examples of ductile metals include gold, silver, and copper.

    • Ductil...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep knowledge on your study subjects.Keep knowledge on basic physics. Need full idea for interviewing Company.

Foreman Supervisor Interview Questions asked at other Companies

Q1. What is Toughness. why curve use on bending path . Description about Britillness. Why CO is more dangerous than CO2.
View answer (1)

Medha Servo Drives Interview FAQs

How many rounds are there in Medha Servo Drives interview for experienced candidates?
Medha Servo Drives interview process for experienced candidates usually has 2-3 rounds. The most common rounds in the Medha Servo Drives interview process for experienced candidates are Technical, Resume Shortlist and HR.
How to prepare for Medha Servo Drives interview for experienced candidates?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Medha Servo Drives. The most common topics and skills that interviewers at Medha Servo Drives expect are Embedded C, Vendor Development, Hardware Design, New Product Development and Power Electronics.
What are the top questions asked in Medha Servo Drives interview for experienced candidates?

Some of the top questions asked at the Medha Servo Drives interview for experienced candidates -

  1. What is Toughness. why curve use on bending path . Description about Britillnes...read more
  2. What are types of voltage regulators. Explain th...read more
  3. Working principle of Project that is developed earli...read more
How long is the Medha Servo Drives interview process?

The duration of Medha Servo Drives interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Medha Servo Drives Interview Process for Experienced

based on 13 interviews

Interview experience

4.3
  
Good
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 417 Interviews
ABB Interview Questions
4.1
 • 234 Interviews
Havells Interview Questions
4.0
 • 209 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
Polycab Wires Interview Questions
4.0
 • 94 Interviews
View all

Medha Servo Drives Reviews and Ratings

based on 731 reviews

4.2/5

Rating in categories

4.0

Skill development

3.9

Work-life balance

3.8

Salary

4.4

Job security

3.9

Company culture

3.8

Promotions

3.9

Work satisfaction

Explore 731 Reviews and Ratings
Procurement Engineer

Ghatkesar

3-8 Yrs

Not Disclosed

Electromagnetic simulation engineer

Hyderabad / Secunderabad

2-7 Yrs

Not Disclosed

Electromagnetic simulation engineer

Hyderabad / Secunderabad

2-7 Yrs

Not Disclosed

Explore more jobs
Service Engineer
248 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
183 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Assistant
121 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
73 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Medha Servo Drives with

Delta Electronics

4.0
Compare

BHEL

4.1
Compare

Siemens

4.1
Compare

ABB

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview