Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Maruti Suzuki Team. If you also belong to the team, you can get access from here

Maruti Suzuki Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Maruti Suzuki Maintenance Engineer Interview Questions and Answers

Updated 13 Sep 2022

Maruti Suzuki Maintenance Engineer Interview Experiences

5 interviews found

I applied via Naukri.com and was interviewed in Dec 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is 5,s and Introduction About self

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical questions and Previous company experience share . And About self and Technical questions

I applied via Campus Placement and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Personal information

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank you your company is better

Maintenance Engineer Interview Questions Asked at Other Companies

Q1. 1)which refrigeration cycle used in chilling plant?
asked in MRF Tyres
Q2. How much bar using in hydraulic, and what is meaning of NAC.
Q3. What are the processes involved in Heat Treatment of metals and w ... read more
asked in Ceat Tyres
Q4. How many types of Valve in Instrumentation..?
Q5. What was the most difficult electrical installation or repair you ... read more

I was interviewed in Feb 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Questions

Interview Preparation Tips

Topics to prepare for Maruti Suzuki Maintenance Engineer interview:
  • Maths
  • Rissnig
Interview preparation tips for other job seekers - Thank you so much
Ddbfxn shdjzjd xhd

I applied via Approached by Company and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Motor Gear box repairing and Hydraulic and pneumatic Cylinder All machanical maintenance fitter work.

Interview Preparation Tips

Interview preparation tips for other job seekers - Strict work. To do a task, check first. There is no chance of an accident. If yes, remove the dangers first. Then do it like that.

Maruti Suzuki interview questions for designations

 Electrical Maintenance Engineer

 (3)

 Mechanical Maintenance Engineer

 (1)

 Maintenance Electrician

 (2)

 Maintenance Supervisor

 (1)

 Maintenance Trainee

 (1)

 Maintenance Manager

 (1)

 Electrical Maintenance Supervisor

 (1)

 ITI Fitter Maintenance

 (1)

Interview Preparation Tips

Round: Group Activity
Experience: Machine maintenance,, machine PM, work planning, kayzen work, modification work etc.

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Jan 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. ITI mein kitne practical Hote Hain
  • Q2.  name aur adress
  • Ans. 

    The question is asking for the candidate's name and address.

    • Provide your full name and complete address.

    • Include your street name, city, state, and zip code.

    • Ensure the address is accurate and up to date.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I applied via Campus Placement

Interview Preparation Tips

Round: Technical Interview
Experience: It was really nice experience. The interview was based on the resume. The panel mostly asked about the projects and the internships.
Tips: Resume based questions.

Skill Tips: understand the concepts of IC engines and other basic mechancial concepts
Skills: Core Mechanical Concepts
Duration: 2
College Name: IIT Madras
Motivation: It is one of the best company for engine R&D and hopefully I will get a better exposure and understanding of the concepts.

I applied via Campus Placement and was interviewed in Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How to get incriment in salary
  • Q2. How much you have experience?

Interview Questionnaire 

4 Questions

  • Q1. How does a diesel genrator work?
  • Ans. 

    A diesel generator works by converting diesel fuel into mechanical energy which is then converted into electrical energy.

    • Diesel fuel is injected into the combustion chamber where it ignites and creates high pressure gases that push the piston down, creating mechanical energy.

    • The mechanical energy is then converted into electrical energy through the use of an alternator.

    • The alternator uses a magnetic field and a conduct...

  • Answered by AI
  • Q2. How a diesel engine works
  • Ans. 

    A diesel engine works by compressing air in the cylinder, which heats up and ignites the fuel injected into the cylinder.

    • Air is drawn into the cylinder and compressed by the piston

    • The compressed air heats up and ignites the fuel injected into the cylinder

    • The explosion pushes the piston down, which turns the crankshaft and powers the engine

    • Diesel engines are more efficient than gasoline engines because they compress the...

  • Answered by AI
  • Q3. Why there is no differential in a train
  • Ans. 

    A train doesn't need a differential because its wheels are fixed to the same axle and rotate at the same speed.

    • Train wheels are fixed to the same axle

    • Wheels rotate at the same speed

    • Differential is used in vehicles with wheels that rotate at different speeds

    • Differential allows for smooth turning

  • Answered by AI
  • Q4. Why petrol engines comparison ratio low when compared to a diesel engine
  • Ans. 

    Petrol engines have lower compression ratios compared to diesel engines.

    • Petrol engines have lower compression ratios to prevent knocking or detonation.

    • Diesel engines have higher compression ratios to ignite the fuel without spark plugs.

    • Higher compression ratios in diesel engines result in better fuel efficiency and torque.

    • Petrol engines require lower compression ratios to accommodate the lower octane rating of petrol f...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Resume was selected and I was invited for an interview
Tips: Resume was selected and I was invited for an interview

Round: Technical + HR Interview
Experience: Sir question was thought and I was giving a quick answer
Tips: Do not give any answer without tension

Skills: Personality, Skills Of Explaining Things, Knowledge About Industries, Knowledge In Ic Engines, Talking Ability

I was interviewed in Aug 2020.

Interview Questionnaire 

1 Question

  • Q1. BS6, BS4 engine EATS Fireing order of 6 cylinder, 4 cylinder
  • Ans. 

    The firing order of a 6-cylinder engine is different from that of a 4-cylinder engine.

    • The firing order determines the sequence in which the cylinders ignite their fuel-air mixture.

    • In a 6-cylinder engine, the firing order can vary depending on the engine design.

    • A common firing order for a 6-cylinder engine is 1-5-3-6-2-4.

    • In a 4-cylinder engine, the firing order is typically 1-3-4-2.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be conference & well dressed formel

Maruti Suzuki Interview FAQs

How many rounds are there in Maruti Suzuki Maintenance Engineer interview?
Maruti Suzuki interview process usually has 1-2 rounds. The most common rounds in the Maruti Suzuki interview process are One-on-one Round, Resume Shortlist and Aptitude Test.
How to prepare for Maruti Suzuki Maintenance Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Maruti Suzuki. The most common topics and skills that interviewers at Maruti Suzuki expect are Die Casting, Heat Treatment, Hydraulics, ISO 14001 and Japanese.

Tell us how to improve this page.

Maruti Suzuki Maintenance Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Maruti Suzuki Maintenance Engineer Salary
based on 39 salaries
₹1.2 L/yr - ₹6 L/yr
6% less than the average Maintenance Engineer Salary in India
View more details

Maruti Suzuki Maintenance Engineer Reviews and Ratings

based on 29 reviews

4.7/5

Rating in categories

4.7

Skill development

4.8

Work-life balance

4.5

Salary

4.5

Job security

4.6

Company culture

4.3

Promotions

4.6

Work satisfaction

Explore 29 Reviews and Ratings
Deputy Manager
2.1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
1.9k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
1.9k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
424 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Territory Sales Manager
375 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Maruti Suzuki with

Tata Motors

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Hero MotoCorp

4.1
Compare

Bajaj Auto

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview