Filter interviews by
Top trending discussions
posted on 21 Dec 2024
Mechanical engine ATS system is a system that automatically starts and stops the engine based on certain conditions.
ATS stands for Automatic Transfer Switch
It is commonly used in backup power systems to ensure seamless transition between utility power and generator power
The system monitors the power supply and starts the engine when utility power fails, and stops it when power is restored
I can join on August 1st, 2022.
Earliest date available is August 1st, 2022.
Currently serving notice period until end of July 2022.
Flexible to discuss start date if needed.
Engine Control Units (ECUs) are electronic control units that manage various aspects of an engine's operation.
ECUs are responsible for controlling fuel injection, ignition timing, emissions, and other engine functions.
They receive input from various sensors and make adjustments to optimize engine performance.
Examples of ECUs include the Engine Control Module (ECM), Transmission Control Module (TCM), and Body Control Mo
posted on 28 Oct 2022
I applied via Approached by Company and was interviewed before Oct 2021. There was 1 interview round.
posted on 14 Aug 2024
I applied via Newspaper Ad and was interviewed in Jul 2024. There was 1 interview round.
Material properties refer to the characteristics of a material that determine how it will behave under certain conditions.
Material properties include strength, hardness, elasticity, density, and thermal conductivity.
Different materials have different properties that make them suitable for specific applications. For example, steel is known for its high strength and durability, making it ideal for construction.
Understand...
Selection of components involves considering factors like functionality, durability, cost, and compatibility.
Identify the specific requirements of the system or equipment
Research and compare different options based on factors like quality, price, and availability
Consider the compatibility of components with existing systems
Evaluate the durability and maintenance requirements of each component
Ensure that the selected co
Work hard, it would be worth it
It is impossible to accurately estimate the number of trees in the campus without more information.
The number of trees can vary greatly depending on the size of the campus
Factors such as the type of trees, density of trees, and layout of the campus will all affect the estimate
One possible approach could be to estimate the number of trees in a small area and then extrapolate that number to the entire campus
I applied via Company Website and was interviewed in Jun 2024. There was 1 interview round.
Martensite formation can be achieved through rapid cooling of austenite.
Martensite formation occurs when austenite is rapidly cooled below the martensite start temperature.
The cooling rate must be fast enough to prevent the diffusion of carbon atoms, allowing them to become trapped in the crystal lattice.
Quenching in water, oil, or air can be used to achieve the necessary cooling rate.
Higher carbon content in the steel...
Carburizing is a cleaner process compared to carbonitriding.
Carburizing involves introducing carbon into the surface of a metal to increase its hardness, while carbonitriding introduces both carbon and nitrogen.
Carburizing typically requires fewer process steps and is more cost-effective.
Carbonitriding can lead to the formation of more complex compounds, which may require additional post-treatment processes.
Carburizing...
posted on 9 Mar 2024
An assignment is a piece of (academic) work or task. It provides opportunity for students to learn, practice and demonstrate they have achieved the learning goals. It provides the evidence for the teacher that the students have achieved the goals
Improve your speaking and reasoning skills. Before you participate in a GD, consider engaging in other public speaking opportunities to build your confidence and skills. ...
Consider your body language
posted on 13 Jun 2024
I applied via Walk-in
The least count of a micrometer is the smallest measurement that can be read on the scale of the micrometer.
The least count of a micrometer is typically 0.01 mm or 0.001 mm depending on the type of micrometer.
It is determined by the number of divisions on the scale of the micrometer and the pitch of the screw.
For example, a micrometer with 50 divisions on the sleeve and a pitch of 0.5 mm will have a least count of 0.01
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
The least count is typically 0.02 mm or 0.001 inches on a vernier caliper.
It is determined by the number of divisions on the main scale and the vernier scale.
For example, if the main scale has 20 divisions and the vernier scale has 10 divisions, the least count would be 0.02 mm.
I applied via Job Portal and was interviewed in Aug 2024. There was 1 interview round.
based on 4 interviews
Interview experience
based on 55 reviews
Rating in categories
Service Engineer
19
salaries
| ₹1.9 L/yr - ₹5 L/yr |
Sales Engineer
14
salaries
| ₹2.8 L/yr - ₹4.1 L/yr |
Senior Service Engineer
7
salaries
| ₹5 L/yr - ₹6 L/yr |
Electrical Engineer
7
salaries
| ₹2 L/yr - ₹3 L/yr |
Executive Accountant
6
salaries
| ₹2.3 L/yr - ₹3 L/yr |
BHEL
TCS
Larsen & Toubro Limited
Thermax Limited