Add office photos
i
Marelli Talbros Chassis Systems
Compare
Filter interviews by
Marelli Talbros Chassis Systems Engineer Interview Questions and Answers
Marelli Talbros Chassis Systems Engineer Interview Experiences
1 interview found
Sidhartha Sankar S. Mohanta
Selected
I applied via LinkedIn and was interviewed in Oct 2023. There were 3 interview rounds.
(4 Questions)
- Q1. About press machines and robots
- Q2. What will you do when press machine was in overloaded?
- Ans.
I would immediately stop the press machine, assess the situation, and take necessary steps to resolve the overload issue.
Stop the press machine immediately to prevent further damage
Assess the situation to determine the cause of the overload
Check for any obstructions or malfunctions in the machine
Adjust the load or speed of the machine to prevent overload in the future
Consult with maintenance team or supervisor for furt
- Q3. Machine main parts
- Q4. What are the emergency systems of Press machines
- Ans.
Emergency systems of Press machines include emergency stop buttons, safety guards, light curtains, and safety PLCs.
Emergency stop buttons are located on the machine and can quickly shut down operations in case of an emergency.
Safety guards are physical barriers that prevent access to dangerous areas of the machine during operation.
Light curtains use sensors to detect when a person or object is too close to the machine,...
(1 Question)
- Q1. About general knowledge and questions regarding ur hobbies. And ur positive attitude test
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Oct 2022. There were 3 interview rounds.
(1 Question)
- Q1. WHAT IS YOUR EXPERIENCE OF YOUR CURRENT COMPANY
(1 Question)
- Q1. INTERVIEW ABOUT YOUR WORK FIELD ETC
Interview Preparation Tips
Anuj Dixit
(2 Questions)
- Q1. Related to department and taken by department head
- Q2. Hr taken a small test before starting of interview
(1 Question)
- Q1. With plant head, what to listen about your career and your project, problem solving method
(1 Question)
- Q1. What are your salary expectations?
Interview Preparation Tips
I applied via Company Website and was interviewed in Aug 2020. There were 4 interview rounds.
Interview Questionnaire
15 Questions
- Q1. What's your experience and surveying works
- Q2. All Questions are Like me and surveying works
- Q3. My experience is tell to Sai service company is very interesting me
- Q4. Which your Education and Which branch
- Q5. Site experience
- Q6. All Surveying works
- Q7. End of your education
- Q8. Which College
- Q9. Languages are required
- Q10. Skills experience
- Q11. Knowledge
- Q12. Planning
- Q13. Travel
- Q14. Food Facility
- Q15. Live home
Interview Preparation Tips
I applied via Referral and was interviewed before Jan 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Quality tools
- Q2. 7 qc tools , why why analysis
- Ans.
The 7 QC tools are used for quality control and the Why Why analysis is used to identify the root cause of a problem.
The 7 QC tools include Pareto chart, cause-and-effect diagram, control chart, histogram, scatter diagram, flowchart, and check sheet.
Why Why analysis involves asking 'why' multiple times to identify the underlying cause of a problem.
It helps in identifying the root cause of a problem and taking correctiv...
Interview Preparation Tips
I applied via Referral and was interviewed before Jul 2019. There were 7 interview rounds.
Interview Questionnaire
1 Question
- Q1. Explain about past experience and about this company products and how your experience will come help company?
Interview Preparation Tips
I applied via campus placement at Indian Institute of Technology (IIT), Chennai and was interviewed in Dec 2016. There were 4 interview rounds.
Interview Preparation Tips
Experience: Time was more than sufficient. Most of the questions were conceptual and very easy without major calculations.
Tips: Subjects:
Heat and mass transfer, Gas turbine engine, Design of machine elements, strength of material etc.
Duration: 30 minutes
Total Questions: 30
Round: Technical Interview
Experience: The interview was divided into 5 steps.
(i) Introduction considering your resume.(i.e. your projects, achievements, field of interest, motivation etc.)
(ii) Logical understanding: Various statistical graphs (e.g. normal distribution curve) were given. I was given a design failure problem related to it. Using graph I had to show a probable solution region in the graph.
(iii) Picture understanding: I was shown a picture and had to identify the system.(It was a front propeller system of conventional aircraft. It was containing a propeller, gear box, blade angle shifting mechanism, its lubrication system, various valves etc.)
(iv) Few topics (around 10) were written on a paper. I had to choose one topic and had to explain it in detail with examples.(one of the topic: Design optimization)
(v) Chit-chat: They will ask you about their company. You can also ask your doubts.(So be prepared with at least 2-3 questions which you can ask them.)
Tips: Your course projects, BTP & MTP carries a HUUUUUGE weight. Try to attach each project with a motivation behind their execution. They don't consider depth of research but they do like it if you have a proper reason behind selecting it. and most important of all Keep your head cool.
Round: HR Interview
Experience: I introduced myself. Then they asked few common HR questions. One of the guy from interview panel got more excited about one of my project. So he kept asking questions related to it. I answered all of them.
Skills: Finite Element Modeling - FEM, Strength Of Materials, Logical Thinking
College Name: IIT Madras
Engineer Interview Questions & Answers
Rolls-Royce
GIRAJAVAGOL UDAY MAHADEV me15m077
posted on 4 Dec 2016
I applied via campus placement at Indian Institute of Technology (IIT), Chennai and was interviewed in Dec 2016. There were 7 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Tell me about yourself. What is difference between plane stress and plane stress condition? Draw S-N curve (High cycle and low cycle). How fracture is related to high and low cycle fatigue? What technical ...
- Ans.
The interview covered topics on stress and fatigue, including plane stress, S-N curve, and technical problems with a product.
Plane stress refers to a state where stress is only present in two dimensions, while plane stress condition is when stress is present in all three dimensions.
S-N curve is a graph that shows the relationship between stress and the number of cycles to failure.
High cycle fatigue occurs when a materi...
- Q2. Present the sheet you have drawn. Tell me about yourself and how you are important to us? What problems Rolls-Royce is facing? What changes will you make if you join Rolls-Royce? Who are the customers of R...
- Ans.
Rolls-Royce is a British multinational engineering company that designs, manufactures, and services power systems for aviation and other industries.
Rolls-Royce is facing financial challenges due to the COVID-19 pandemic.
As an engineer, I can bring innovative solutions to improve efficiency and reduce costs.
Rolls-Royce customers include airlines, defense organizations, and energy companies.
I recently faced a challenge o...
Interview Preparation Tips
Experience: We submitted our resume through online portal. Shortlist criteria is mostly CGPA.
Tips: Keep good CGPA (above 8.5 out of 10).
Round: Test
Experience: 30 technical questions for 30 minutes. All questions are MCQ type. Technical test for thermal and design was common. Both theoretical and numerical questions were asked.
18 data interpretation questions for 20 minutes. 6 charts (graphs, tables, bar charts) were given. 18 statements were given. We have to identify which statement is related to which chart and using that data , identify statement is true or false.
Tips: Technical Test was easy , but remember formulae for numerical. Questions were related to Thermal and Design. No manufacturing questions was asked.
Data interpretation was too easy. No need to prepare.
Duration: 50 minutes
Total Questions: 48
Round: Activity
Experience: Every candidate was given a A2 size sheet and marker. In 20 min, you have to present any technical topic on sheet. You can write or draw.
Tips: Be prepared for one technical topic and what specifics you have to write. Also last year (Batch before me) ,they asked to present yourself as product on sheet. Prepare for that also.
Round: Behavioural Interview
Experience: Two person will test your communication , presentation and behavioral skill in this interview. Presentation skill is checked by how you present the sheet. Also , a lot of company related questions will be asked.
Tips: Present the sheet as your presenting a technical paper in conference. Keep detail information about Rolls-Royce.
Round: Technical Interview
Experience: Technical Interview had 5 steps.
Step 1: General Technical questions
Step 2: Discussion about your technical work like projects.
Step 3: Give solution to Practical problem
Step 4: Take any topic from given topics and explain it.
Step 5: Technical discussion about Rolls-Royce engine technology
Tips: Be prepared for tough interview. Study your projects deeply. Listen to practical problem and then answer. Keep updated about Rolls-Royce technology.
Skills: Technical Knowledge(ML, Presentation Skills
College Name: IIT Madras
Marelli Talbros Chassis Systems Interview FAQs
Some of the top questions asked at the Marelli Talbros Chassis Systems Engineer interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
People are getting interviews through
Engineer Interview Questions from Similar Companies
Marelli Talbros Chassis Systems Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Manager
9
salaries
|  ₹7.2 L/yr - ₹10.5 L/yr |
|
Deputy Manager
9
salaries
| ₹9.6 L/yr - ₹11 L/yr |
|
Production Engineer
8
salaries
| ₹3.8 L/yr - ₹4.8 L/yr |
|
Senior Engineer
7
salaries
| ₹3.6 L/yr - ₹6.1 L/yr |
|
Engineer
6
salaries
| ₹3 L/yr - ₹5.3 L/yr |
Sundaram Clayton
Rane (Madras)
Jamna Auto Industries
Bharat Forge
Calculate your in-hand salary
- Home >
- Interviews >
- Marelli Talbros Chassis Systems Interview Questions >
- Marelli Talbros Chassis Systems Engineer Interview Questions
