Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Mahindra Tractors Process Quality Engineer Interview Questions and Answers

Updated 22 Jan 2025

Mahindra Tractors Process Quality Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - Group Discussion 

20 boys line handled by me

Round 2 - Technical 

(3 Questions)

  • Q1. What is 5S system
  • Ans. 

    5S system is a methodology for organizing a workplace, focusing on efficiency and safety.

    • Sort: Separate necessary items from unnecessary ones.

    • Set in order: Arrange items in a logical and efficient manner.

    • Shine: Clean and maintain the work area.

    • Standardize: Establish standards and procedures for maintaining the first 3 S's.

    • Sustain: Ensure the system is consistently followed and improved upon.

    • Example: Labeling tools and ...

  • Answered by AI
  • Q2. What is 7Qc tool
  • Ans. 

    7QC tools are a set of basic statistical tools used for quality control and process improvement.

    • 7QC tools include Pareto chart, cause-and-effect diagram, control chart, histogram, scatter diagram, flowchart, and check sheet.

    • These tools help in identifying and solving quality-related issues in a systematic manner.

    • For example, a Pareto chart can be used to prioritize the most significant factors affecting quality in a pr

  • Answered by AI
  • Q3. What is Sigma rule
  • Ans. 

    Sigma rule is a statistical concept used in Six Sigma methodology to determine the percentage of data points that fall within a certain number of standard deviations from the mean.

    • Sigma rule is based on the normal distribution curve.

    • It states that for a normal distribution, approximately 68% of data falls within one standard deviation from the mean, 95% within two standard deviations, and 99.7% within three standard de...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I have payment ingrement

Interview questions from similar companies

I applied via Walk-in

Interview Questionnaire 

2 Questions

  • Q1. What Initial data required to bulid a Gear box
  • Ans. 

    Initial data required to build a Gear box

    • Design specifications and requirements

    • Type of gear system (e.g. spur, helical, bevel, etc.)

    • Power and torque requirements

    • Gear ratios and speed requirements

    • Material selection for gears and housing

    • Lubrication system design

    • Manufacturing and assembly processes

    • Quality control and testing procedures

  • Answered by AI
  • Q2. Which material will you choose for shaft and gear
  • Ans. 

    The material chosen for the shaft and gear depends on factors such as load, speed, and operating conditions.

    • Consider the load and speed requirements of the shaft and gear.

    • Evaluate the operating conditions, such as temperature and corrosion resistance.

    • Common materials for shafts include steel, stainless steel, and titanium.

    • Common materials for gears include steel, cast iron, and bronze.

    • The material selection should ensu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Should have in-depth knowledge

I applied via Referral and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is the best attitude as an Engineer?

Interview Preparation Tips

Interview preparation tips for other job seekers - Great.

I was interviewed before Jun 2016.

Interview Questionnaire 

1 Question

  • Q1.  Why Mechanical Engineering?
  • Ans. 

    I chose Mechanical Engineering because of my passion for designing and building machines that improve people's lives.

    • Fascination with how things work and desire to create innovative solutions

    • Interest in applying principles of physics and mathematics to real-world problems

    • Enjoyment of hands-on work and building physical prototypes

    • Desire to contribute to advancements in technology and industry

    • Examples: designing more eff...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Online. Related to courses of Design, MOS, TOM. Tough MCQ

I applied via Campus Placement and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell me about your work experience
  • Q2. What is your educational qualification

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare better to face good interview

I applied via Campus Placement and was interviewed before Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. General questions regarding automobile and quality

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while giving interview

I applied via Recruitment Consultant and was interviewed in Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Only one how many tiller you can sell.
  • Ans. 

    The number of tillers that can be sold depends on market demand, production capacity, and competition.

    • Market demand is a key factor in determining the number of tillers that can be sold.

    • Production capacity also plays a role in determining the number of tillers that can be sold.

    • Competition from other companies selling tillers can impact sales.

    • Factors such as pricing, quality, and marketing strategies can also affect sal...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't join for plain areas. Only good for hilly areas.

I applied via Approached by Company and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Related to subject some favourite subjector interviwer
  • Q2. Two stroke & four stroke difference
  • Ans. 

    Two stroke engines complete a power cycle in one revolution, while four stroke engines complete it in two revolutions.

    • Two stroke engines have a simpler design and are lighter than four stroke engines.

    • Four stroke engines are more fuel-efficient and produce less emissions than two stroke engines.

    • Two stroke engines are commonly used in small power tools and motorcycles, while four stroke engines are used in cars and large...

  • Answered by AI
  • Q3. In which stroke air interned in combustion chamber
  • Ans. 

    Air is interned in the combustion chamber during the intake stroke.

    • During the intake stroke, the piston moves down and creates a vacuum that draws air into the combustion chamber.

    • The air is mixed with fuel and ignited during the compression stroke.

    • The resulting explosion pushes the piston down during the power stroke.

    • Finally, the piston moves up during the exhaust stroke to expel the spent gases.

    • This four-stroke cycle

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Some questions related to tractor technology & thermodynamics etc

I applied via Naukri.com and was interviewed before Apr 2021. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Core technical interview about your field
Round 3 - One-on-one 

(1 Question)

  • Q1. Technical round 2, core competency questions
Round 4 - One-on-one 

(1 Question)

  • Q1. Basic and Technical interview with Plant Head
Round 5 - One-on-one 

(1 Question)

  • Q1. Basic and technical interview with Corporate head operations

Interview Preparation Tips

Interview preparation tips for other job seekers - Be skilled in your field. Adapt positive attitude.

I applied via Company Website and was interviewed before Aug 2019. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Heat treatment related questions , Quality Management Systems related , Quality core tools , A number of stastical based questions , A number of process , failure and controls related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare technical domain at good level.
Contribute & help others!
anonymous
You can choose to be anonymous

Mahindra Tractors Interview FAQs

How many rounds are there in Mahindra Tractors Process Quality Engineer interview?
Mahindra Tractors interview process usually has 2 rounds. The most common rounds in the Mahindra Tractors interview process are Group Discussion and Technical.
What are the top questions asked in Mahindra Tractors Process Quality Engineer interview?

Some of the top questions asked at the Mahindra Tractors Process Quality Engineer interview -

  1. What is 5S sys...read more
  2. What is 7Qc t...read more
  3. What is Sigma r...read more

Recently Viewed

INTERVIEWS

Mahindra Tractors

No Interviews

SALARIES

Tata Motors Insurance Broking And Advisory Services

No Salaries

INTERVIEWS

Mahindra Automotives

No Interviews

LIST OF COMPANIES

Mahindra Automotives

Locations

REVIEWS

Tata Motors Insurance Broking And Advisory Services

No Reviews

INTERVIEWS

Mahindra Automotives

No Interviews

INTERVIEWS

Mahindra Automotives

10 top interview questions

REVIEWS

Mahindra Automotives

No Reviews

INTERVIEWS

Mahindra Tractors

20 top interview questions

INTERVIEWS

Aircel

No Interviews

Tell us how to improve this page.

Mahindra Tractors Process Quality Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 995 Interviews
Maruti Suzuki Interview Questions
4.2
 • 586 Interviews
Hero MotoCorp Interview Questions
4.1
 • 333 Interviews
TVS Motor Interview Questions
4.0
 • 312 Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
John Deere Interview Questions
4.1
 • 228 Interviews
View all

Fast track your campus placements

View all
Deputy Manager
117 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
104 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
101 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Supervisor
43 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
38 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Mahindra Tractors with

Tractors and Farm Equipment

4.1
Compare

Sonalika Tractors

3.6
Compare

John Deere

4.1
Compare

New Holland Fiat (India)

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview