Add office photos
Filter interviews by
Mahendra Sponge And Power Interview Questions, Process, and Tips
Top Mahendra Sponge And Power Interview Questions and Answers
- Q1. How many flag in 8085 microprocessor and it's name?asked in Maintenance Engineer interview
- Q2. How many pin in 8085 microprocessor?asked in Maintenance Engineer interview
- Q3. Full form of IC. What is KCL lowasked in Maintenance Engineer interview
Mahendra Sponge And Power Interview Experiences
2 interviews found
Selected
I applied via Walk-in and was interviewed before Aug 2022. There were 3 interview rounds.
(1 Question)
- Q1. Tell me some things about yourself.
(1 Question)
- Q1. Do you know. EHS RELATED JOB RESPONSIBILTY
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Jan 2021. There were 3 interview rounds.
What is defferent between analog and digital?
(5 Questions)
- Q1. My Introduction in English
- Q2. Addition of binary numbers.
- Ans.
Binary addition involves adding two binary numbers digit by digit.
Start from the rightmost digit and add the corresponding digits of both numbers.
If the sum is 0 or 1, write it down. If it is 2, write down 0 and carry 1 to the next digit.
Repeat the process for all digits, including the carried digit from the previous step.
The final result is the sum of the two binary numbers.
Example: 1011 + 1101 = 11000
- Q3. How many pin in 8085 microprocessor?
- Ans.
The 8085 microprocessor has 40 pins.
The 8085 microprocessor has 40 pins in total.
These pins are used for various functions such as data transfer, address bus, control signals, power supply, and clock signals.
Some of the important pins include the ALE (Address Latch Enable), RD (Read), WR (Write), and RESET pins.
The pin configuration of the 8085 microprocessor is shown in its datasheet.
Understanding the pin configuratio...
- Q4. How many flag in 8085 microprocessor and it's name?
- Ans.
There are 5 flags in 8085 microprocessor - Carry, Auxiliary Carry, Sign, Zero, and Parity.
8085 microprocessor has 5 flags
Carry flag is set when there is a carry out of the MSB in an arithmetic operation
Auxiliary Carry flag is set when there is a carry out of bit 3 in an arithmetic operation
Sign flag is set when the result of an operation is negative
Zero flag is set when the result of an operation is zero
Parity flag is ...
- Q5. Full form of IC. What is KCL low
- Ans.
IC stands for Integrated Circuit. KCL low refers to Kirchhoff's Current Law.
IC is a small electronic device made up of multiple components on a single chip.
KCL low is a principle in electrical engineering that states that the sum of currents entering a node is equal to the sum of currents leaving the node.
ICs are commonly used in electronic devices such as computers, smartphones, and televisions.
KCL low is used to anal...
Interview Preparation Tips
Skills evaluated in this interview
Maintenance Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
I applied via Approached by Company and was interviewed in Sep 2024. There were 5 interview rounds.
(2 Questions)
- Q1. Projects contribution
- Q2. Career transition from development(firmware to software), security(Product to system) etc.,
Print 10 to 1 without using any loops in C
print the number by toggling a bit of a given position
virtual functions -> what would be the output of the code and vtable concept explain in detail
information security standards, protocols, regulations
(3 Questions)
- Q1. All scenario based questions such as you have to hire a candidate but the budget is restricted. You have identified the ideal candidate. how would you handle it.
- Q2. Conflict management
- Q3. Product security questions
(4 Questions)
- Q1. How to add security to a product which is nearing dev completion
- Ans.
Implement security measures such as code reviews, penetration testing, and security training for developers.
Conduct thorough code reviews to identify and fix any security vulnerabilities
Perform penetration testing to simulate real-world attacks and identify weaknesses
Provide security training for developers to educate them on best practices and common security threats
- Q2. What is the right approach to bake in security
- Ans.
The right approach to bake in security involves integrating security measures throughout the software development lifecycle.
Implementing security best practices from the beginning of the development process
Conducting regular security assessments and audits
Training developers on secure coding practices
Utilizing automated security testing tools
Implementing secure coding guidelines and standards
Incorporating security revi
- Q3. How do you address knowledge deficit in team on security areas to develop a product with optimal security
- Ans.
Address knowledge deficit by providing training, resources, and mentorship to team members.
Conduct regular training sessions on security best practices and updates
Provide access to resources such as online courses, articles, and workshops
Assign mentors within the team to guide and support members in security areas
Encourage team members to ask questions and seek clarification on security topics
Implement peer review proc
- Q4. How do you identify the reasonable security for a product? Say for example, the products of enphase used by businesses or by end customers(home owners).
- Ans.
Identifying reasonable security for products involves assessing potential risks, compliance requirements, industry standards, and customer expectations.
Conduct a thorough risk assessment to identify potential threats and vulnerabilities
Consider compliance requirements such as GDPR, HIPAA, or industry-specific regulations
Adhere to industry standards like ISO 27001 or NIST Cybersecurity Framework
Take into account custome...
(2 Questions)
- Q1. Typical questions on why enphase, why x salary, do you undestand roles and responsibilities
- Q2. Notice period negotiation, what are your career aspirations
Interview Preparation Tips
L2-2 hr by BLR team
L3-30mins by VP
L4-50mins by VP
L5-20mins by HR Manager
Skills evaluated in this interview
Manufacturing Services Manager Interview Questions & Answers
Premier Energies
Anonymous
posted on 7 Dec 2024
Selected
I applied via Naukri.com and was interviewed in Nov 2024. There were 2 interview rounds.
(3 Questions)
- Q1. About Experience
- Q2. JD Description and Capabilities
- Q3. Manufacturing Experience
(4 Questions)
- Q1. Solar Power Quality Question
- Q2. Manufacturing process and fundamentals
- Q3. Service process
- Q4. Complaint handling
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
SAEL Industries Limited
IKKA Mishra
posted on 24 Dec 2024
(2 Questions)
- Q1. Tell me about your self
- Ans.
I am a dedicated Mechanical Engineer with a strong background in designing and implementing mechanical systems.
Graduated with a degree in Mechanical Engineering from XYZ University
Experienced in CAD software such as AutoCAD and SolidWorks
Worked on projects involving HVAC systems and industrial machinery
Skilled in analyzing and solving complex engineering problems
Strong communication and teamwork skills
- Q2. How many experience you have in Boiler Turbine,ESP,BAG FILTER EPCI
- Ans.
I have 5 years of experience in Boiler Turbine, ESP, and BAG FILTER EPCI projects.
5 years of experience in Boiler Turbine projects
Familiar with ESP (Electrostatic Precipitator) systems
Proficient in BAG FILTER EPCI (Engineering, Procurement, Construction, and Installation)
Managed various projects involving Boiler Turbine, ESP, and BAG FILTER systems
Implemented cost-effective solutions for improving efficiency
(3 Questions)
- Q1. ERECTION PROCESS OF BOILER ?
- Ans.
The erection process of a boiler involves assembling and installing all the components to create a functional boiler system.
Prepare the foundation for the boiler
Assemble the boiler components such as tubes, drums, and headers
Install the boiler on the foundation
Connect the necessary piping and valves
Test the boiler for proper functioning
- Q2. Material specification of all boiler pressure part.
- Ans.
Boiler pressure parts are typically made of carbon steel, alloy steel, or stainless steel to withstand high pressure and temperature.
Carbon steel is commonly used for lower pressure boilers
Alloy steel is used for higher pressure boilers
Stainless steel is used for corrosion resistance in boilers
Materials must meet specific standards like ASTM A516 for carbon steel
- Q3. Which welding process used in water wall panel
- Ans.
The welding process used in water wall panels is typically TIG welding.
TIG welding is commonly used for water wall panels due to its precision and clean welds
TIG welding helps prevent contamination in the weld area, which is crucial for water wall panels
Other welding processes like MIG welding or submerged arc welding may also be used depending on the specific requirements
(2 Questions)
- Q1. What are the functions and applications of SCADA systems?
- Ans.
SCADA systems are used for monitoring, controlling, and managing industrial processes through centralized systems.
Monitor and control industrial processes in real-time
Collect and analyze data from sensors and equipment
Provide alarms and notifications for abnormal conditions
Remote access and control of processes
Historical data logging and reporting
Examples: monitoring oil pipelines, controlling power plants, managing wa
- Q2. What is RF network communication?
- Ans.
RF network communication is a wireless communication technology that uses radio frequency signals to transmit data between devices.
RF network communication allows devices to communicate wirelessly over long distances.
It is commonly used in applications such as remote monitoring, control systems, and IoT devices.
RF signals can be affected by interference, obstacles, and distance, so proper planning and design are import...
(2 Questions)
- Q1. What amount of money is required?
- Q2. What is the location required for the position?
General Manager - Quality Management Interview Questions & Answers
Doosan Power Systems
Karunanithy Posanguraja
posted on 20 Nov 2024
Relevant area synapses of preparation through PPT
(2 Questions)
- Q1. Relevant field with the technical
- Q2. Experience in relevant previously work areaS
(2 Questions)
- Q1. Salary Part with negotiation
- Q2. Medical check up
Interview Preparation Tips
Senior Network Engineer Interview Questions & Answers
Sterlite Power
Anonymous
posted on 20 Jul 2024
Selected
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
(5 Questions)
- Q1. What is the process of configuring a new Juniper switch?
- Q2. What are the series of Juniper device?
- Q3. What is IP address and mac address, what are the difference between them?
- Q4. What is lan and vlan?
- Q5. How we check the status Juniper switch port?
Interview Preparation Tips
Apprenticeship Trainee Interview Questions & Answers
Bses Yamuna Power
Anonymous
posted on 9 Oct 2024
Selected
(2 Questions)
- Q1. What is electrical
- Ans.
Electrical refers to anything related to electricity, including the generation, distribution, and use of electrical power.
Electrical systems involve the flow of electrons through conductors.
Electricity can be generated from various sources such as coal, natural gas, nuclear, and renewable energy.
Electrical components include wires, switches, circuit breakers, and transformers.
Electricians are professionals who work wit...
- Q2. What is joint box
- Ans.
A joint box is a container used to connect and protect electrical wires or cables.
Used in electrical installations to house wire connections
Helps to organize and protect wires
Commonly made of plastic or metal
Examples: junction box, electrical enclosure
Financial Consultant Interview Questions & Answers
Gupta Power Infrastructure
Anonymous
posted on 5 Sep 2024
(5 Questions)
- Q1. Accounting taxation
- Q2. Balance sheet related questions
- Q3. P&L related questions
- Q4. Banking related
- Q5. Any other questions
Mahendra Sponge And Power Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
Mahendra Sponge And Power Reviews and Ratings
based on 31 reviews
Rating in categories
|
Assistant Manager
10
salaries
|  ₹3.6 L/yr - ₹4.2 L/yr |
|
Accountant
9
salaries
| ₹2.8 L/yr - ₹3.7 L/yr |
|
Shift Incharge
6
salaries
| ₹2.4 L/yr - ₹4.2 L/yr |
|
Assistant Engineer
5
salaries
| ₹2.4 L/yr - ₹3 L/yr |
|
Mechanical Engineer
5
salaries
| ₹2.4 L/yr - ₹2.5 L/yr |
JSW Steel
Tata Steel
Steel Authority Of India
Jindal Steel and Power
Calculate your in-hand salary
- Home >
- Interviews >
- Mahendra Sponge And Power Interview Questions
