Filter interviews by
I applied via Referral and was interviewed in Jul 2024. There was 1 interview round.
I worked at XYZ Company as a Third Party Engineer for 3 years.
Worked at XYZ Company for 3 years
Handled third party engineering projects
Collaborated with external vendors for project execution
Yes, I am ready to work at any site in Mumbai.
I am flexible and willing to work at any location in Mumbai.
I understand the importance of being on-site for third party engineering work.
I have experience working at various sites in Mumbai.
I am familiar with the transportation options available in Mumbai for commuting to different sites.
Top trending discussions
posted on 11 Dec 2023
I applied via Campus Placement and was interviewed in Aug 2024. There was 1 interview round.
The unit of Energy is Joule (J)
The unit of Energy is Joule (J)
Energy can also be measured in kilowatt-hours (kWh)
1 Joule is equal to 1 watt-second
The unit of resistance is Ohm (Ω).
The unit of resistance is represented by the symbol Ω (Ohm).
Resistance is measured in Ohms, named after the German physicist Georg Simon Ohm.
One Ohm is equal to one volt per ampere (1 Ω = 1 V/A).
The unit of current is Ampere (A)
The unit of current is Ampere (A)
Current is the flow of electric charge in a circuit
1 Ampere is equivalent to 1 Coulomb per second
Current is measured using an ammeter
The unit of capacitance is Farad (F)
The unit of capacitance is named after Michael Faraday
1 Farad is equal to 1 Coulomb per Volt
Common multiples of Farad include microfarad (uF) and picofarad (pF)
The unit of power is the watt (W)
The unit of power is the watt (W)
Power is the rate at which work is done or energy is transferred
1 watt is equal to 1 joule per second
Common examples of power units include kilowatts (kW) and horsepower (hp)
The unit of power is the watt (W).
The unit of power is the watt (W)
Power is the rate at which work is done or energy is transferred
1 watt is equal to 1 joule per second
Common examples of power units include kilowatts (kW) and horsepower (hp)
The unit of current is Ampere (A), which measures the rate of flow of electric charge.
The unit of current is Ampere (A)
Current is the rate of flow of electric charge
Commonly represented by the symbol 'I'
1 Ampere is equivalent to 1 Coulomb per second
posted on 9 Sep 2023
About your working experience
posted on 8 Jun 2024
I applied via Recruitment Consulltant and was interviewed before Jun 2023. There were 3 interview rounds.
MDPE stands for Medium Density Polyethylene.
MDPE is a type of plastic commonly used in the manufacturing of pipes and fittings.
It has a higher density than LDPE (Low Density Polyethylene) but lower than HDPE (High Density Polyethylene).
MDPE is known for its excellent resistance to stress cracking and good chemical resistance.
It is often used for gas and water distribution systems, as well as in the agricultural and min
I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.
A motor is a device that converts electrical energy into mechanical energy, while a transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
Motor converts electrical energy into mechanical energy
Transformer transfers electrical energy between circuits through electromagnetic induction
Motors are used in appliances like fans, washing machines, and cars
Transf...
Power factor is a measure of how effectively electrical power is being used in a circuit.
Power factor is the ratio of real power to apparent power in a circuit.
It is a number between 0 and 1, with 1 representing perfect efficiency.
A low power factor indicates inefficient use of electrical power.
Power factor can be improved by using power factor correction devices.
For example, inductive loads like motors have a lower po
posted on 18 Jan 2020
The steam turbines rotor puts load on the thrust bearing.
The steam turbines rotor puts load on the thrust bearing.
The thrust bearing is designed to handle the axial load generated by the rotor.
Other bearings in the steam turbine, such as journal bearings, handle radial loads.
The thrust bearing is typically located at the non-drive end of the rotor.
Examples of thrust bearings used in steam turbines include tilting pad b
Lube oil number cod is needed to identify the type of lubricant used in machinery.
Lube oil number cod helps in identifying the viscosity of the lubricant.
It also helps in determining the type of base oil used in the lubricant.
Different machinery requires different types of lubricants with specific viscosity and base oil.
Lube oil number cod helps in ensuring the correct lubricant is used for the machinery.
For example, a...
TDC stands for Top Dead Center and BDC stands for Bottom Dead Center.
TDC is the point where the piston is at its highest position in the cylinder.
BDC is the point where the piston is at its lowest position in the cylinder.
These terms are commonly used in internal combustion engines.
The position of the piston at TDC and BDC is important for engine timing and performance.
TDC and BDC are also used in reference to the posi...
1 bar is equal to 14.5038 PSI.
1 bar is a unit of pressure measurement in the metric system.
PSI stands for pounds per square inch and is a unit of pressure measurement in the imperial system.
1 bar is equal to 100,000 Pascals (Pa) or 14.5038 PSI.
This conversion is important in industries such as automotive and aerospace engineering.
posted on 12 May 2018
I applied via Recruitment Consultant and was interviewed in Mar 2018. There were 7 interview rounds.
An LPG plant is a facility that processes and stores liquefied petroleum gas. It requires various electrical and electronic equipment for its operations.
LPG plant is a facility that processes and stores liquefied petroleum gas
Electrical equipment in an LPG plant includes transformers, switchgear, motors, and control panels
Electronic equipment in an LPG plant includes sensors, transmitters, and PLCs
Examples of electrica...
NO&NC contactor stands for Normally Open and Normally Closed contactor used in electrical circuits.
NO&NC contactor is a type of electrical switch used to control power circuits.
Normally Open (NO) contactor allows current to flow when the coil is energized.
Normally Closed (NC) contactor interrupts current flow when the coil is energized.
NO&NC contactors are commonly used in motor control circuits.
They are es...
based on 1 interview
Interview experience
based on 8 reviews
Rating in categories
Project Engineer
451
salaries
| ₹3 L/yr - ₹4.5 L/yr |
Assistant Manager
195
salaries
| ₹8 L/yr - ₹15.5 L/yr |
Deputy Manager
92
salaries
| ₹11.4 L/yr - ₹20.4 L/yr |
Manager
42
salaries
| ₹13.6 L/yr - ₹29 L/yr |
Site Engineer
38
salaries
| ₹1.5 L/yr - ₹4.6 L/yr |
Indraprastha Gas
Gujarat Gas
Adani Gas
Gail Gas