Upload Button Icon Add office photos

Mahanagar Gas

Compare button icon Compare button icon Compare

Filter interviews by

Mahanagar Gas Service Engineer Interview Questions and Answers

Updated 11 Nov 2022

Mahanagar Gas Service Engineer Interview Experiences

1 interview found

I applied via Job Portal and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Gas pipeline experience technical work DRS Mrs Mrs commercial industrial all the work
  • Q2. Gas pipeline work all the question
  • Q3. Office work data entry work all the work
  • Q4. Gas pipe all the work IFFCO fertilizer biogas plant CNG PNG LPG LNG commercial industrial domestic all the work pipeline

Interview Preparation Tips

Topics to prepare for Mahanagar Gas Service Engineer interview:
  • Bachelor degree
  • Distance
Interview preparation tips for other job seekers - Operation and maintenance work CNG PNG LPG biogas plant all the work

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Behavioral and management related
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is upper yield and lower yield in stress strain diagram
  • Ans. 

    Upper and lower yield refer to the stress values at which a material begins to deform plastically.

    • Upper yield is the stress value at which a material begins to deform plastically under increasing stress.

    • Lower yield is the stress value at which a material begins to deform plastically under decreasing stress.

    • These values are important in determining the strength and ductility of a material.

    • For example, if a material has ...

  • Answered by AI
  • Q2. What is difference between toughness and hardness
  • Ans. 

    Toughness is the ability to withstand stress without breaking, while hardness is the ability to resist indentation or scratching.

    • Toughness is a measure of a material's ability to absorb energy before breaking or fracturing.

    • Hardness is a measure of a material's resistance to indentation or scratching.

    • Toughness is important in materials that are subjected to impact or shock loading, while hardness is important in materia...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep basics strong, be confident and mention past leadership actions taken
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Explain All the laws of Thermodynamics
  • Ans. 

    The laws of thermodynamics are fundamental principles governing energy and heat transfer in physical systems.

    • First Law: Energy cannot be created or destroyed, only transferred or converted.

    • Second Law: Heat naturally flows from hot to cold objects, and entropy tends to increase over time.

    • Third Law: As temperature approaches absolute zero, entropy approaches a minimum value.

    • Examples: A car engine converting fuel into mot...

  • Answered by AI
  • Q2. One should have good Engineeringskills
Round 2 - HR 

(1 Question)

  • Q1. Salary Expectation

I applied via Company Website and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How will you identify if a pump is cavitating while working on a DCS panel?
  • Ans. 

    To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.

    • Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

    • Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

    • Listen for unusual noises such as a rattling or grinding sound coming from the pump.

    • Inspect the p...

  • Answered by AI
  • Q2. How would you prepare a hydrocarbon vessel for vessel entry?
  • Ans. 

    To prepare a hydrocarbon vessel for vessel entry, follow these steps:

    • Ensure the vessel is properly isolated from the process and all sources of energy

    • Ventilate the vessel to remove any flammable or toxic gases

    • Perform a thorough inspection of the vessel for any signs of leaks or damage

    • Implement proper lockout/tagout procedures to prevent accidental activation of equipment

    • Provide appropriate personal protective equipment...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for GAIL Senior Engineer interview:
  • Chemical Engineering
  • DCS Operations
Interview preparation tips for other job seekers - Try to answer the questions asked in simple words. The interviewer generally wants to judge an interviewee based on his understanding of the subject. When an applicant is appearing for an interview, he should share his experience and try to quote examples from his experience.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jan 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

My GD topic was renewable energy.

Round 2 - HR 

(7 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.

    • 10+ years of experience in engineering

    • Specialize in designing and implementing complex systems

    • Strong problem-solving skills

    • Experience with various programming languages such as Java, Python, and C++

  • Answered by AI
  • Q2. Why do you want to leave your previous company and join GAIL
  • Ans. 

    Seeking new challenges and growth opportunities at GAIL.

    • Desire for new challenges and opportunities for growth

    • Interested in working in a different industry or with different technologies

    • Attracted to GAIL's reputation and projects

    • Seeking a more collaborative and innovative work environment

  • Answered by AI
  • Q3. What do your parents do
  • Ans. 

    My parents are both retired now, but my father used to work as a civil engineer and my mother was a teacher.

    • Father worked as a civil engineer

    • Mother was a teacher

    • Both are retired now

  • Answered by AI
  • Q4. Have you ever visited Delhi earlier
  • Ans. 

    Yes, I have visited Delhi earlier for a business trip.

    • Visited Delhi for a business trip

    • Explored historical sites like Red Fort and Qutub Minar

    • Enjoyed local cuisine like butter chicken and chaat

  • Answered by AI
  • Q5. How did you reach Noida for interview
  • Q6. Where are you staying in Noida for interview process
  • Ans. 

    I am staying at a hotel in Sector 18, Noida for the interview process.

    • Staying at a hotel in Sector 18, Noida

    • Close to the interview location

    • Comfortable accommodation for the duration of the process

  • Answered by AI
  • Q7. Related family background
Round 3 - Technical 

(7 Questions)

  • Q1. Detailed technical questions about bearing, pump, furnace tubes (1st and 2nd pass)MOC, TLE MOC, heat exchanger tube MOC, TEMA codes and classification etc.
  • Q2. Decoking process of cracking furnace, Naphtha circuit of furnace with sketches,
  • Ans. 

    Decoking process involves removing coke deposits from cracking furnace and naphtha circuit to maintain efficiency.

    • Decoking process involves burning off coke deposits using controlled combustion.

    • Mechanical decoking involves using high-pressure water jets to remove coke deposits.

    • Chemical decoking involves using solvents or acids to dissolve coke deposits.

    • Regular decoking is essential to prevent blockages and maintain fur

  • Answered by AI
  • Q3. Detailed refrigeration cycles
  • Ans. 

    Refrigeration cycles are thermodynamic processes used in refrigerators and air conditioners to transfer heat from a low temperature reservoir to a high temperature reservoir.

    • Refrigeration cycles typically involve four main components: compressor, condenser, expansion valve, and evaporator.

    • The refrigerant undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the space being coole...

  • Answered by AI
  • Q4. Safety related questions which I couldn't answer well
  • Q5. Safety procedures before starting of hot job
  • Ans. 

    Safety procedures before starting a hot job include obtaining a hot work permit, conducting a hazard assessment, ensuring proper ventilation, and having fire extinguishing equipment nearby.

    • Obtain a hot work permit before starting any hot job

    • Conduct a hazard assessment to identify potential risks

    • Ensure proper ventilation in the work area to prevent buildup of flammable gases

    • Have fire extinguishing equipment nearby and r

  • Answered by AI
  • Q6. Furnace tubes Welding related questions
  • Q7. Scaffolding and insulation related general questions (easy)

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for GD and just keep enough technical knowledge on your field of experience. Be relaxed and give interview with happy face..don't be depressed if you couldn't answer any question during interview. If you don't know anything just say "I don't know" ...keep the things simple and give honest answer always.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. I was asked to make a presentation on laser technology.
Round 3 - Aptitude Test 

Knowledge of the English language, its vocabulary and comprehension. Ability to solve basic mathematical problem, which shows the capacity to use an analytical approach to everyday puzzles.

Interview Preparation Tips

Interview preparation tips for other job seekers - One needs to present a bright visage. Then, you have to open minded towards the solutions to problems, instead of being dogmatic.

I applied via Company Website and was interviewed in Nov 2021. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About work experience and responsibilities
  • Q2. Why you are leaving to present job

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintain your confidence level, give suitable answer if you know otherwise say sorry and move to next question....

I applied via Company Website and was interviewed before Jun 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Simple pump related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Remember the over arching concepts learnt in your university

I applied via Recruitment Consultant and was interviewed in Mar 2018. There were 7 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. About yourself and your role in previous job.
  • Q2. What do you know about lpg plant and tell some Electrical and Electronics equipment in lpg plant ?
  • Ans. 

    An LPG plant is a facility that processes and stores liquefied petroleum gas. It requires various electrical and electronic equipment for its operations.

    • LPG plant is a facility that processes and stores liquefied petroleum gas

    • Electrical equipment in an LPG plant includes transformers, switchgear, motors, and control panels

    • Electronic equipment in an LPG plant includes sensors, transmitters, and PLCs

    • Examples of electrica...

  • Answered by AI
  • Q3. What do you know about NO&NC Contactor.
  • Ans. 

    NO&NC contactor stands for Normally Open and Normally Closed contactor used in electrical circuits.

    • NO&NC contactor is a type of electrical switch used to control power circuits.

    • Normally Open (NO) contactor allows current to flow when the coil is energized.

    • Normally Closed (NC) contactor interrupts current flow when the coil is energized.

    • NO&NC contactors are commonly used in motor control circuits.

    • They are es...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Experienced person having technical knowledge to solve problem .

Round: Test
Experience: About all questions related to LPG Plant operation.

Round: Salary Negotiation
Experience: HR FIX SALARY.

General Tips: Do the best try and tell the truth to the interviewer never try to oversmart .
Skills: Communication, Problem Solving, Leadership, Decision Making Skills
Duration: 1-4 weeks

Mahanagar Gas Interview FAQs

How many rounds are there in Mahanagar Gas Service Engineer interview?
Mahanagar Gas interview process usually has 2 rounds. The most common rounds in the Mahanagar Gas interview process are Resume Shortlist and Technical.
What are the top questions asked in Mahanagar Gas Service Engineer interview?

Some of the top questions asked at the Mahanagar Gas Service Engineer interview -

  1. Gas pipe all the work IFFCO fertilizer biogas plant CNG PNG LPG LNG commercial ...read more
  2. Gas pipeline experience technical work DRS Mrs Mrs commercial industrial all th...read more
  3. Gas pipeline work all the quest...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Bharat Petroleum Interview Questions
4.1
 • 149 Interviews
GAIL Interview Questions
4.4
 • 64 Interviews
ExxonMobil Interview Questions
3.8
 • 64 Interviews
Gps Renewables Interview Questions
4.0
 • 22 Interviews
Kent plc Interview Questions
4.3
 • 21 Interviews
NBTC GROUP Interview Questions
3.6
 • 19 Interviews
View all
Mahanagar Gas Service Engineer Salary
based on 6 salaries
₹1.7 L/yr - ₹3 L/yr
44% less than the average Service Engineer Salary in India
View more details

Mahanagar Gas Service Engineer Reviews and Ratings

based on 2 reviews

3.0/5

Rating in categories

3.9

Skill development

3.9

Work-life balance

3.9

Salary

3.0

Job security

3.9

Company culture

3.9

Promotions

3.9

Work satisfaction

Explore 2 Reviews and Ratings
Project Engineer
429 salaries
unlock blur

₹3 L/yr - ₹4.5 L/yr

Assistant Manager
193 salaries
unlock blur

₹8 L/yr - ₹16.5 L/yr

Deputy Manager
90 salaries
unlock blur

₹11.4 L/yr - ₹20.4 L/yr

Manager
41 salaries
unlock blur

₹13.6 L/yr - ₹29 L/yr

Site Engineer
38 salaries
unlock blur

₹1.5 L/yr - ₹4.6 L/yr

Explore more salaries
Compare Mahanagar Gas with

Indian Oil Corporation

4.4
Compare

Bharat Petroleum

4.1
Compare

Hindustan Petroleum

4.2
Compare

GAIL

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview